Prof. Dr. BARIŞ SABUNCUOĞLU

Yayın Ağı

Makaleler 39

1. Artificial neural networks for predicted bending properties of additively manufactured pyramidal lattice truss core sandwich structures

KARAGÖZLÜ C., Ayli E., TEKİN H., SABUNCUOĞLU B.

MATERIALS TODAY COMMUNICATIONS , cilt.47, 2025 (SCI-Expanded, Scopus)

2. Sensitivity Analysis of Material Parameters on the Microscale Stress Distribution in Glass Fiber-Reinforced Composites in Transverse Loading

Bektas B., SANDIKKAYA M. A., SABUNCUOĞLU B.

MECHANICS OF COMPOSITE MATERIALS , sa.1, ss.145-158, 2025 (SCI-Expanded, Scopus)

3. Micro-scale fiber/matrix stress concentrations in unidirectional glass/carbon hybrid composites under transverse loading

Turan E., Guerrero Garcia J. M., Lomov S. V., SABUNCUOĞLU B.

POLYMER COMPOSITES , 2025 (SCI-Expanded, Scopus)

4. Experimental and numerical study on the ballistic performance of laminated ceramics

Cura M., Tanabi H., SABUNCUOĞLU B.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING , cilt.193, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

5. Dynamic stress concentrations around a single fiber break in unidirectional composites: a 3D finite element analysis

MUTLU Ç., SABUNCUOĞLU B., Kadioglu F. S., Swolfs Y.

Journal of Reinforced Plastics and Composites , cilt.42, sa.19-20, ss.1075-1087, 2023 (SCI-Expanded, Scopus)

6. Development of a Numerical Model for the Modal Analysis of a Gun Control Unit Column with Isolator

Dograr T., SABUNCUOĞLU B.

JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES , cilt.11, sa.7, ss.2955-2968, 2023 (SCI-Expanded, Scopus)

7. Impact behavior of sandwich composites for aviation applications: A review

Karsandik Y., SABUNCUOĞLU B., YILDIRIM B., Silberschmidt V. V.

Composite Structures , cilt.314, 2023 (SCI-Expanded, Scopus)

8. Experimental and analytical investigation of the tensile behavior of 3D-printed composites based on micro-CT analysis

Şik A., Tanabi H., Çubukçu H. E., Sabuncuoğlu B.

Journal of Thermoplastic Composite Materials , 2023 (SCI-Expanded, Scopus)

9. Stress analysis of vascularized glass fiber composites exposed to bending loading

Tanabi H., Atasoy A. G., Demiral M., Sabuncuoğlu B.

ADVANCED COMPOSITE MATERIALS , cilt.31, sa.2, ss.208-220, 2022 (SCI-Expanded)

10. Investigation of stress distributions between a frictional rigid cylinder and laminated glass fiber composites

Yilmaz K. B., Sabuncuoglu B., Yildirim B.

ACTA MECHANICA , cilt.232, sa.11, ss.4379-4403, 2021 (SCI-Expanded, Scopus)

11. Development of a procedure to model the mechanical behavior of composites with embedded element method by considering the matrix non-linearity

ŞIK A., GÜRSES E., SABUNCUOĞLU B.

COMPOSITE STRUCTURES , cilt.259, 2021 (SCI-Expanded, Scopus)

12. Development of an artificial neural network using parametric correlation technique for the determination of machined torsional spring stiffness

SABUNCUOĞLU B., Demirtas O.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.36, sa.1, ss.105-118, 2021 (SCI-Expanded, Scopus, TRDizin)

13. Mesh stiffness of micro-spur gears by finite element formulations based on modified couple stress theory

Pehlivanoglu Y., Aydogan M. O., SABUNCUOĞLU B.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS , cilt.26, sa.12, ss.3829-3838, 2020 (SCI-Expanded, Scopus)

14. Experimental and numerical investigation of transverse shear behavior of glass-fibre composites with embedded vascular channel

Demiral M., Tanabi H., SABUNCUOĞLU B.

COMPOSITE STRUCTURES , cilt.252, 2020 (SCI-Expanded, Scopus)

15. A brief review on the mechanical behavior of nonwoven fabrics

YILMAZ K. B., SABUNCUOĞLU B., YILDIRIM B., Silberschmidt V. V.

JOURNAL OF ENGINEERED FIBERS AND FABRICS , cilt.15, 2020 (SCI-Expanded, Scopus)

16. Stress redistribution around fiber breaks in unidirectional steel fiber composites considering the nonlinear material behavior

SABUNCUOĞLU B., MUTLU Ç., KADIOĞLU F. S., Swolfs Y.

COMPOSITE STRUCTURES , cilt.239, 2020 (SCI-Expanded, Scopus)

17. Fiber/matrix interface stress analysis of flax-fiber composites under transverse loading considering material nonlinearity

SABUNCUOĞLU B., Cakmakci O., KADIOĞLU F. S.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.39, ss.345-360, 2020 (SCI-Expanded, Scopus)

18. Micro-scale numerical study of fiber/matrix debonding in steel fiber composites

SABUNCUOĞLU B., Lomov S.

JOURNAL OF ENGINEERED FIBERS AND FABRICS , cilt.15, 2020 (SCI-Expanded, Scopus)

19. Micro-CT analysis of deviations in fiber orientation and composite stiffness near the microvascular channels embedded in glass-fiber reinforced composites

SABUNCUOĞLU B., Tanabi H., Soete J., Lomov S.

COMPOSITE STRUCTURES , cilt.237, 2020 (SCI-Expanded, Scopus)

20. Deformation and damage of random fibrous networks

Sozumert E., Farukh F., SABUNCUOĞLU B., Demirci E., Acar M., Pourdeyhimi B., et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.184, ss.233-247, 2020 (SCI-Expanded, Scopus)

21. Investigation of stress distributions in the resin rich region and failure behavior in glass fiber composites with microvascular channels under tensile loading

Al-Shawk A., Tanabi H., Sabuncuoglu B.

COMPOSITE STRUCTURES , cilt.192, ss.101-114, 2018 (SCI-Expanded, Scopus)

22. Analysis of stress concentrations in transversely loaded steel-fiber composites with nano-reinforced interphases

Sabuncuoglu B., GORBATİKH L., Lomov S. V.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.130, ss.248-257, 2018 (SCI-Expanded, Scopus)

23. Evaluation of Fatigue Behavior of Lead-Free Solder Joints in Four-Point Bending Test by Finite-Element Modeling

Sabuncuoglu B., VANHEE F., WİLLEMS G., VANDEVELDE B., VANDEPİTTE D.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY , cilt.7, sa.12, ss.1957-1964, 2017 (SCI-Expanded, Scopus)

24. Full-field strain measurements at the micro-scale in fiber-reinforced composites using digital image correlation

Mehdikhani M., Aravand M., Sabuncuoglu B., Callens M. G., Lomov S. V., Gorbatikh L.

COMPOSITE STRUCTURES , cilt.140, ss.192-201, 2016 (SCI-Expanded, Scopus)

25. Micro-scale finite element analysis of stress concentrations in steel fiber composites under transverse loading

Sabuncuoglu B., Orlova S., Gorbatikh L., Lomov S. V., Verpoest I.

JOURNAL OF COMPOSITE MATERIALS , cilt.49, sa.9, ss.1057-1069, 2015 (SCI-Expanded, Scopus)

26. Mechanical analysis of bi-component-fibre nonwovens: Finite-element strategy

Farukh F., Demirci E., Sabuncuoglu B., Acar M., Pourdeyhimi B., Silberschmidt V. V.

COMPOSITES PART B-ENGINEERING , cilt.68, ss.327-335, 2015 (SCI-Expanded, Scopus)

27. Mechanical behaviour of nonwovens: Analysis of effect of manufacturing parameters with parametric computational model

Farukh F., Demirci E., Sabuncuoglu B., Acar M., Pourdeyhimi B., Silberschmidt V. V.

COMPUTATIONAL MATERIALS SCIENCE , cilt.94, ss.8-16, 2014 (SCI-Expanded, Scopus)

28. On the high stress concentrations in steel fiber composites under transverse loading

Sabuncuoglu B.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.33, sa.21, ss.1941-1953, 2014 (SCI-Expanded, Scopus)

29. Numerical analysis of progressive damage in nonwoven fibrous networks under tension

Farukh F., Demirci E., Sabuncuoglu B., Acar M., Pourdeyhimi B., Silberschmidt V. V.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.51, sa.9, ss.1670-1685, 2014 (SCI-Expanded, Scopus)

30. Finite element modelling of fibrous networks: Analysis of strain distribution in fibres under tensile load

Sabuncuoglu B., Acar M., Silberschmidt V. V.

COMPUTATIONAL MATERIALS SCIENCE , cilt.79, ss.143-158, 2013 (SCI-Expanded, Scopus)

31. Parametric code for generation of finite-element model of nonwovens accounting for orientation distribution of fibres

Sabuncuoglu B., Acar M., Silberschmidt V. V.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING , cilt.94, sa.5, ss.441-453, 2013 (SCI-Expanded, Scopus)

32. Characterisation and numerical modelling of complex deformation behaviour in thermally bonded nonwovens

Farukh F., Demirci E., Sabuncuoglu B., Acar M., Pourdeyhimi B., Silberschmidt V. V.

COMPUTATIONAL MATERIALS SCIENCE , cilt.71, ss.165-171, 2013 (SCI-Expanded, Scopus)

33. Analysis of rate-dependent tensile properties of polypropylene fibres used in thermally bonded nonwovens

Sabuncuoglu B., Demirci E., Acar M., Silberschmidt V. V.

JOURNAL OF THE TEXTILE INSTITUTE , cilt.107, sa.9, ss.965-971, 2013 (SCI-Expanded, Scopus)

34. Numerical modelling of damage initiation in low-density thermally bonded nonwovens

Farukh F., Demirci E., Sabuncuoglu B., Acar M., Pourdeyhimi B., Silberschmidt V. V.

COMPUTATIONAL MATERIALS SCIENCE , cilt.64, ss.112-115, 2012 (SCI-Expanded, Scopus)

35. Finite element modelling of thermally bonded nonwovens: Effect of manufacturing parameters on tensile stiffness

Sabuncuoglu B., Acar M., Silberschmidt V. V.

COMPUTATIONAL MATERIALS SCIENCE , cilt.64, ss.192-197, 2012 (SCI-Expanded, Scopus)

36. A parametric finite element analysis method for low-density thermally bonded nonwovens

Sabuncuoglu B., Acar M., Silberschmidt V. V.

COMPUTATIONAL MATERIALS SCIENCE , cilt.52, sa.1, ss.164-170, 2012 (SCI-Expanded, Scopus)

37. Three dimensional computational analysis of fatigue crack propagation in functionally graded materials

Sabuncuoglu B., DAĞ S., YILDIRIM B.

COMPUTATIONAL MATERIALS SCIENCE , cilt.52, sa.1, ss.246-252, 2012 (SCI-Expanded, Scopus)

38. Analysis of Creep Behavior of Polypropylene Fibers

SABUNCUOĞLU B., Svetlana O.

Applied Mechanics and Materials , cilt.70, ss.410-415, 2011 (SCI-Expanded, Scopus)

39. Sonlu elemanlar yöntemi ile yorulma çatlağı ilerlemesi simülasyonu

SABUNCUOĞLU B., DAĞ S., YILDIRIM B.

Makina Tasarım ve İmalat , cilt.7, ss.87-95, 2005 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 28

1. DETERMINATION OF FIBER ORIENTATIONS AND STIFFNESS PROPERTIES VIA MICRO-CT SCAN IMAGES: APPLICATION TO COMPOSITE MATERIALS WITH MICROVASCULAR CHANNELS

SABUNCUOĞLU B., TEKİN H., Soete J., Lomov S.

UMTIK 2022, Türkiye, 31 Ağustos 2022, (Tam Metin Bildiri)

2. Development of a modeling strategy to improve the embedded element method in composites modeling in case of matrix nonlinearity

ŞIK A., GÜRSES E., SABUNCUOĞLU B.

Fibremod Conference, Leuven, Belçika, 9 - 12 Aralık 2019, (Özet Bildiri)

3. Micro-CT measurement of fiber disturbance and composite stiffness: Application to in glass-fiber reinforced composites with embedded microvascular channels

TEKİN H., SABUNCUOĞLU B., Soete J., Lomov S.

Euromech Colloquium 602, Lyon, Fransa, 13 - 15 Mart 2019, (Özet Bildiri)

4. Fiber/Matrix Interface Debonding in Steel-Fiber Composites

SABUNCUOĞLU B., Tabatabaei S., Lomov S.

Workshop on”Plasticity, Damage and Fracture ofEngineering Materials, Türkiye, 25 Ekim 2018, (Özet Bildiri)

5. The effect of manufacturing parameters on the stress concentrations in composites with micro-vascular channels under transverse loading

Al Shawk A., TEKİN H., SABUNCUOĞLU B.

4th International Conference on Mechanics of Composites, İspanya, 09 Temmuz 2018, (Özet Bildiri)

6. Analysis of Fiber/Matrix Interface Debonding in Steel Fiber Composites under Transverse Loading

SABUNCUOĞLU B., Tabatabaei S., Lomov S. V.

18th European Conference on Composite Materials (ECCM 18), 24 - 27 Haziran 2018, (Tam Metin Bildiri)

7. Stress Concentrations in Composites with Microvascular Channels

AL SHAWK A., TANABİ H., SABUNCUOĞLU B.

Procedia Structural Integrity, 25 - 26 Eylül 2017, (Tam Metin Bildiri)

8. Notches in fibrous materials: micro-mechanisms of deformation and damage

Sozumert E., Farukh F., Sabuncuoglu B., Demirci E., Acar M., Pourdeyhimi B., et al.

27th International Conference on Mathematical and Computer Simulations in Mechanics of Solids and Structures - Fundamentals of Static and Dynamic Fracture (MCM), Saint Peter, Guernsey Ve Alderney, 25 - 27 Eylül 2017, cilt.6, ss.168-173, (Tam Metin Bildiri)

9. Digital image correlation and finite element analysis applied to fiber reinforced composites at the micro scale

Mehdikhani M., Aravand M. A., SABUNCUOĞLU B., Callens M. G., Lomov S., Gorbatikh L.

20th International Conference on Composite Materials, Kopenhag, Danimarka, 19 - 24 Temmuz 2015, (Tam Metin Bildiri)

10. The Effect of Nano-reinforced fiber matrix interface on stress in steel fiber composites

SABUNCUOĞLU B., SÖKMEN Ö.

ECCM16 - 16TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Sevilla, İspanya, 22 - 26 Haziran 2014, (Tam Metin Bildiri)

11. Mechanical Behaviour of Nonwovens Analysis of Effects of Manufacturing Parameters with Parametric Computational Model

SABUNCUOĞLU B., Acar M., Silberschmidt V.

23nd International Workshop on Computational Mechanics of Materials, Singapore, Singapur, 2 - 04 Ekim 2013, (Özet Bildiri)

12. Analysis of Stress Distributions in Steel Fibre Reinforced Composites in Micro Scale Including Large Deformations

SABUNCUOĞLU B., Sökmen Ö.

IV ECCOMAS Thematic Conference on the Mechanical Response of Composites, Azorlar, Portekiz, 25 - 27 Eylül 2013, (Özet Bildiri)

13. Micro mechanical Analysis of Stresses in Steel Fibre Reinforced Composites

SABUNCUOĞLU B., Sökmen Ö.

TEXCOMP-11 CONFERENCE, Leuven, Belçika, 16 Eylül 2013 - 20 Haziran 2014, (Tam Metin Bildiri)

14. Mıcro scale computational analysis of the effect of matrix properties on the stress distribution of steel fiber composites

SABUNCUOĞLU B., Sökmen Ö.

24th Annual Internatıonal SICOMP Conference on Manufacturing and Design of Composites, 30 - 31 Mayıs 2013, (Özet Bildiri)

15. Characterisation and Numerıcal Modelling of Deformation and Damage In Thermally Bonded Nonwovens

SABUNCUOĞLU B., Acar M., Silberschmidt V.

22nd International Workshop on Computational Mechanics of Materials, Baltimore, Amerika Birleşik Devletleri, 24 - 26 Eylül 2012, (Özet Bildiri)

16. Finite element modeling of solder joint fatigue in four-point bending test

Sabuncuoglu B., Vanhee F., Willems G., Vandevelde B., Vandepitte D., De Wolf I.

2012 13th International Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2012, Cascais, Portekiz, 16 - 18 Nisan 2012, (Tam Metin Bildiri)

17. Analysis of Creep Behavior of Polypropylene Fibers Edinburg

SABUNCUOĞLU B., Acar M., Silberschmidt V.

International Conference on Advances in Experimental Mechanics: Integrating Simulation and Experimentation (ISEV2011), Edinburgh, Birleşik Krallık, 7 - 09 Eylül 2011, (Tam Metin Bildiri)

18. Finite Element Modelling of Thermally Bonded Nonwoven Mater ials A Parametr ic Model with Or ientation Based Distr ibution of Fibres

SABUNCUOĞLU B., Acar M., Silberschmidt V.

21st International Workshop on Computational Mechanics of Materials, Limerick, İrlanda, 21 - 24 Ağustos 2011, (Özet Bildiri)

19. Analysis of Creep Behavior of Polypropylene Fibers

Sabuncuoglu B., Acar M., Silberschmidt V. V.

8th International Conference on Advances in Experimental Mechanics: Integrating Simulation and Experimentation for Validation, Edinburgh, Saint Helena, 7 - 09 Eylül 2011, cilt.70, ss.410-415, (Tam Metin Bildiri)

20. Finite Element Analysis of Thermally Bonded Nonwovens Under Large Deformation A Discontinuous Model with a Large Number of Fibres

SABUNCUOĞLU B., Acar M., Silberschmidt V.

20th International Workshop on Computational Mechanics of Materials, Loughborough, Birleşik Krallık, 8 - 10 Eylül 2010, (Özet Bildiri)

Metrikler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

222

H-İndeks (WoS)

Atıf (Scopus)

512

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Proje

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Proje

Tez Danışmanlığı

Açık Erişim