Prof. Dr. SAİR KAHRAMAN

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Performance prediction of roadheaders used in coal mines from the needle penetration index and the schmidt hammer value

Rostami M., KAHRAMAN S., Dibavar B., FENER M.

Geomechanics and Geophysics for Geo-Energy and Geo-Resources , cilt.10, sa.1, 2024 (SCI-Expanded)

Predicting the strength, density, and porosity of rocks from roll crusher tests

KAHRAMAN S., Ince I., Rostami M., Dibavar B.

Journal of the Southern African Institute of Mining and Metallurgy , cilt.124, sa.2, ss.53-58, 2024 (SCI-Expanded)

The needle penetration index for estimating the physico-mechanical properties of pyroclastic rocks

KAHRAMAN S., Ince I.

Journal of the Southern African Institute of Mining and Metallurgy , cilt.123, sa.9, ss.463-469, 2023 (SCI-Expanded)

Estimating the Physico-Mechanical Properties of Pyroclastic Rocks from Electrical Resistivity

KAHRAMAN S.

PURE AND APPLIED GEOPHYSICS , cilt.179, sa.1, ss.301-309, 2022 (SCI-Expanded)

The effect of mineralogy on the microwave assisted cutting of igneous rocks

KAHRAMAN S., Sarbangholi F. S., Balcı C., FENER M., KARPUZ C., Comakli R., et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.81, sa.1, 2022 (SCI-Expanded)

The assessment of the factors affecting the microwave heating of magmatic rocks

KAHRAMAN S., Canpolat A. N., FENER M., Kilic C. O.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES , cilt.6, sa.4, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

The influence of microwave treatment on the compressive and tensile strength of igneous rocks

KAHRAMAN S., Canpolat A. N., FENER M.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.129, 2020 (SCI-Expanded)

Estimation of uniaxial compressive strength of pyroclastic rocks (Cappadocia, Turkey) by gene expression programming

Ince I., Bozdag A., FENER M., KAHRAMAN S.

ARABIAN JOURNAL OF GEOSCIENCES , cilt.12, sa.24, 2019 (SCI-Expanded)

The needle penetration index to estimate the performance of an axial type roadheader used in a coal mine

KAHRAMAN S., Aloglu A. S., Aydin B., Saygin E.

GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES , cilt.5, sa.1, ss.37-45, 2019 (SCI-Expanded) Sürdürülebilir Kalkınma

Predicting the strength and brittleness of rocks from a crushability index

KAHRAMAN S., Toraman O. Y., Cayirli S.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.77, sa.4, ss.1639-1645, 2018 (SCI-Expanded)

Investigating the effect of strength on the LCPC abrasivity of igneous rocks

KAHRAMAN S., FENER M., Kaesling H., Thuro K.

GEOMECHANICS AND ENGINEERING , cilt.15, sa.2, ss.805-810, 2018 (SCI-Expanded)

Estimating the uniaxial compressive strength of pyroclastic rocks from the slake durability index

KAHRAMAN S., FENER M., GÜNAYDIN O.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.76, sa.3, ss.1107-1115, 2017 (SCI-Expanded)

Estimating the Wet-Rock P-Wave Velocity from the Dry-Rock P-Wave Velocity for Pyroclastic Rocks

KAHRAMAN S., FENER M., KILIÇ C. Ö.

PURE AND APPLIED GEOPHYSICS , cilt.174, sa.7, ss.2621-2629, 2017 (SCI-Expanded)

The needle penetration test for predicting coal strength

KAHRAMAN S., Aloglu A. S., Aydin B., Saygin E.

JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY , cilt.117, sa.6, ss.587-591, 2017 (SCI-Expanded) Sürdürülebilir Kalkınma

Predicting the noise level in rock sawing from the physico-mechanical and mineralogical properties of rocks

KAHRAMAN S., Delibalta M. S., Comakli R., FENER M.

APPLIED ACOUSTICS , cilt.114, ss.244-251, 2016 (SCI-Expanded)

The performance prediction of roadheaders from easy testing methods

KAHRAMAN S., KAHRAMAN S.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.75, sa.4, ss.1585-1596, 2016 (SCI-Expanded) Sürdürülebilir Kalkınma

The influences of textural parameters of grains on the LCPC abrasivity of coarse-grained igneous rocks

KAHRAMAN S., Fener M., Kaesling H., Thuro K.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY , cilt.58, ss.216-223, 2016 (SCI-Expanded)

The prediction of penetration rate for percussive drills from indirect tests using artificial neural networks

KAHRAMAN S.

JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY , cilt.116, sa.8, ss.790-797, 2016 (SCI-Expanded)

Estimating specific energy from the brittleness indexes in cutting metallic ores

Comakli R., KAHRAMAN S., Balcı C., Tumaç D.

JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY , cilt.116, sa.8, ss.761-766, 2016 (SCI-Expanded)

A preliminary study on the conversion factor used in the prediction of the UCS from the BPI for pyroclastic rocks

KAHRAMAN S., FENER M., KILIÇ C. Ö.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.75, sa.2, ss.771-780, 2016 (SCI-Expanded)

Estimating the Penetration Rate in Diamond Drilling in Laboratory Works Using the Regression and Artificial Neural Network Analysis

KAHRAMAN S.

NEURAL PROCESSING LETTERS , cilt.43, sa.2, ss.523-535, 2016 (SCI-Expanded)

Review of Ground Characterization by Using Instrumented Drills for Underground Mining and Construction

KAHRAMAN S., ROSTAMI J., NAEIMIPOUR A.

ROCK MECHANICS AND ROCK ENGINEERING , cilt.49, sa.2, ss.585-602, 2016 (SCI-Expanded)

An assessment on the indirect determination of the volumetric block proportion of Misis fault breccia (Adana, Turkey)

KAHRAMAN S., Alber M., Fener M., Gunaydin O.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.74, sa.3, ss.899-907, 2015 (SCI-Expanded)

The Usability of Noise Level from Rock Cutting for the Prediction of Physico-Mechanical Properties of Rocks

Delibalta M. S., KAHRAMAN S., Comakli R.

FLUCTUATION AND NOISE LETTERS , cilt.14, sa.1, 2015 (SCI-Expanded)

The usability of the Cerchar abrasivity index for the evaluation of the triaxial strength of Misis Fault Breccia

KAHRAMAN S., ALBER M., Gunaydin O., Fener M.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.74, sa.1, ss.163-170, 2015 (SCI-Expanded)

Electrical impedance spectroscopy measurements to estimate the uniaxial compressive strength of a fault breccia

KAHRAMAN S., ALBER M.

BULLETIN OF MATERIALS SCIENCE , cilt.37, sa.6, ss.1543-1550, 2014 (SCI-Expanded)

Estimation of rock strength from quantitative assessment of rock texture

Öztürk C. A., Nasuf E., KAHRAMAN S.

JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY , cilt.114, sa.6, ss.471-480, 2014 (SCI-Expanded)

The determination of uniaxial compressive strength from point load strength for pyroclastic rocks

Kahraman S.

ENGINEERING GEOLOGY , cilt.170, ss.33-42, 2014 (SCI-Expanded)

Performance prediction of roadheaders in metallic ore excavation

COMAKLI R., KAHRAMAN S., Balcı C.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY , cilt.40, ss.38-45, 2014 (SCI-Expanded)

NOISE LEVEL MEASUREMENT TEST TO PREDICT THE ABRASION RESISTANCE OF ROCK AGGREGATES

KAHRAMAN S., Delibalta M. S., Comakli R.

FLUCTUATION AND NOISE LETTERS , cilt.12, sa.4, 2013 (SCI-Expanded)

Predicting the compressive and tensile strength of rocks from indentation hardness index

KAHRAMAN S., Fener M., Kozman E.

JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY , cilt.112, sa.5, ss.331-339, 2012 (SCI-Expanded)

The drillability assessment of rocks using the different brittleness values

Yarali O., KAHRAMAN S.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY , cilt.26, sa.2, ss.406-414, 2011 (SCI-Expanded)

The usability of Cerchar abrasivity index for the prediction of UCS and E of Misis Fault Breccia: Regression and artificial neural networks analysis

KAHRAMAN S., Alber M., Fener M., Gunaydin O.

EXPERT SYSTEMS WITH APPLICATIONS , cilt.37, sa.12, ss.8750-8756, 2010 (SCI-Expanded)

Electrical resistivity measurement to predict uniaxial compressive and tensile strength of igneous rocks

KAHRAMAN S., YEKEN T.

BULLETIN OF MATERIALS SCIENCE , cilt.33, sa.6, ss.731-735, 2010 (SCI-Expanded)

Predicting the crushability of rocks from the impact strength index

Toraman O. Y., KAHRAMAN S., Cayirli S.

MINERALS ENGINEERING , cilt.23, sa.9, ss.752-754, 2010 (SCI-Expanded)

Analyses of acoustic emission response of a fault breccia in uniaxial deformation

Slatalla N., Alber M., KAHRAMAN S.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.69, sa.3, ss.455-463, 2010 (SCI-Expanded)

The effect of rock classes on the relation between uniaxial compressive strength and point load index

KAHRAMAN S., Gunaydin O.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.68, sa.3, ss.345-353, 2009 (SCI-Expanded)

Reply to Yagiz's discussion on Kahraman and Gunaydin (2008) indentation hardness test to estimate the sawability of carbonate rocks. Bull Eng Geol Environ 67:507-511

KAHRAMAN S., Gunaydin O.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.68, sa.3, ss.441-442, 2009 (SCI-Expanded)

Evaluating the strength and deformability properties of Misis fault breccia using artificial neural networks

KAHRAMAN S., Gunaydin O., Alber M., Fener M.

EXPERT SYSTEMS WITH APPLICATIONS , cilt.36, sa.3, ss.6874-6878, 2009 (SCI-Expanded)

Predicting the uniaxial compressive strength and elastic modulus of a fault breccia from texture coefficient

Alber M., KAHRAMAN S.

ROCK MECHANICS AND ROCK ENGINEERING , cilt.42, sa.1, ss.117-127, 2009 (SCI-Expanded)

Evaluating the geomechanical properties of Misis fault breccia (Turkey)

KAHRAMAN S., Alber M., Fener M., Gunaydin O.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.45, sa.8, ss.1469-1479, 2008 (SCI-Expanded)

Indentation hardness test to estimate the sawability of carbonate rocks

KAHRAMAN S., Gunaydin O.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.67, sa.4, ss.507-511, 2008 (SCI-Expanded)

Triaxial strength of a fault breccia of weak rocks in a strong matrix

KAHRAMAN S., Alber M.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.67, sa.3, ss.435-441, 2008 (SCI-Expanded)

Determination of physical properties of carbonate rocks from P-wave velocity

KAHRAMAN S., YEKEN T.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.67, sa.2, ss.277-281, 2008 (SCI-Expanded)

Predicting Los Angeles abrasion loss of rock aggregates from crushability index

KAHRAMAN S., Toraman O. Y.

BULLETIN OF MATERIALS SCIENCE , cilt.31, sa.2, ss.173-177, 2008 (SCI-Expanded)

Electrical resistivity measurements to predict abrasion resistance of rock aggregates

KAHRAMAN S., Fener M.

BULLETIN OF MATERIALS SCIENCE , cilt.31, sa.2, ss.179-184, 2008 (SCI-Expanded)

Determination of fracture depth of rock blocks from P-wave velocity

KAHRAMAN S., Soylemez M., Fener M.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.67, sa.1, ss.11-16, 2008 (SCI-Expanded)

Empirical methods to predict the abrasion resistance of rock aggregates

KAHRAMAN S., Gunaydin O.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.66, sa.4, ss.449-455, 2007 (SCI-Expanded)

The correlations between the saturated and dry P-wave velocity of rocks

KAHRAMAN S.

ULTRASONICS , cilt.46, sa.4, ss.341-348, 2007 (SCI-Expanded)

Predicting the Los Angeles abrasion loss of rock aggregates from the uniaxial compressive strength

KAHRAMAN S., Fener M.

MATERIALS LETTERS , cilt.61, sa.26, ss.4861-4865, 2007 (SCI-Expanded)

Performance prediction of circular diamond saws from mechanical rock properties in cutting carbonate rocks

Fener M., KAHRAMAN S., Ozder M. O.

ROCK MECHANICS AND ROCK ENGINEERING , cilt.40, sa.5, ss.505-517, 2007 (SCI-Expanded)

Multifactorial fuzzy approach to the sawability classification of building stones

Tutmez B., KAHRAMAN S., Gunaydin O.

CONSTRUCTION AND BUILDING MATERIALS , cilt.21, sa.8, ss.1672-1679, 2007 (SCI-Expanded)

A quality classification of building stones from P-wave velocity and its application to stone cutting with gang saws

KAHRAMAN S., Ulker U., Delibalta M. S.

JOURNAL OF THE SOUTH AFRICAN INSTITUTE OF MINING AND METALLURGY , cilt.107, sa.7, ss.427-430, 2007 (SCI-Expanded)

Authors' reply to the discussion by A. Karakus on the paper "predicting the sawability of carbonate rocks using multiple curvilinear regression analysis"

KAHRAMAN S., Fener M., Gunaydin O.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.43, sa.8, ss.1308-1310, 2006 (SCI-Expanded)

Estimating unconfined compressive strength and elastic modulus of a fault breccia mixture of weak blocks and strong matrix

KAHRAMAN S., Alber M.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.43, sa.8, ss.1277-1287, 2006 (SCI-Expanded)

Reply to the discussion by A. Sawangsuriya and D. Fratta on "Correlations between P-wave velocity and Atterberg limits of cohesive soils"

Fener M., KAHRAMAN S., Bay Y., Gunaydin O.

CANADIAN GEOTECHNICAL JOURNAL , cilt.43, sa.6, ss.656-657, 2006 (SCI-Expanded)

Predicting the physico-mechanical properties of rocks from electrical impedance spectoscopy measurements

KAHRAMAN S., Alber A.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.43, sa.4, ss.543-553, 2006 (SCI-Expanded)

Sawability prediction of carbonate rocks from shear strength parameters using artificial neural networks

KAHRAMAN S., Altun H., Tezekici B., Fener M.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.43, sa.1, ss.157-164, 2006 (SCI-Expanded)

A comparative evaluation of indirect methods to estimate the compressive strength of rocks

Fener M., KAHRAMAN S., Bilgil A., Gunaydin O.

ROCK MECHANICS AND ROCK ENGINEERING , cilt.38, sa.4, ss.329-343, 2005 (SCI-Expanded)

The effect of porosity on the relation between uniaxial compressive strength and point load index

KAHRAMAN S., Gunaydin O., Fener M.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.42, sa.4, ss.584-589, 2005 (SCI-Expanded)

Correlations between P-wave velocity and Atterberg limits of cohesive soils

Fener M., KAHRAMAN S., Bay Y., Gunaydin O.

CANADIAN GEOTECHNICAL JOURNAL , cilt.42, sa.2, ss.673-677, 2005 (SCI-Expanded)

Predicting the sawability of carbonate rocks using multiple curvilinear regression analysis

KAHRAMAN S., Fener M., Gunaydin O.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.41, sa.7, ss.1123-1131, 2004 (SCI-Expanded)

Sawability prediction of carbonate rocks from brittleness indexes

Gunaydin O., KAHRAMAN S., Fener M.

JOURNAL OF THE SOUTH AFRICAN INSTITUTE OF MINING AND METALLURGY , cilt.104, sa.4, ss.239-243, 2004 (SCI-Expanded)

A brittleness index to estimate fracture toughness

KAHRAMAN S., Altindag R.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.41, sa.2, ss.343-348, 2004 (SCI-Expanded)

Performance analysis of drilling machines using rock modulus ratio

KAHRAMAN S.

JOURNAL OF THE SOUTH AFRICAN INSTITUTE OF MINING AND METALLURGY , cilt.103, sa.8, ss.515-522, 2003 (SCI-Expanded)

Dominant rock properties affecting the penetration rate of percussive drills

KAHRAMAN S., Bilgin N., Feridunoglu C.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.40, sa.5, ss.711-723, 2003 (SCI-Expanded)

Correlation of TBM and drilling machine performances with rock brittleness

KAHRAMAN S.

ENGINEERING GEOLOGY , cilt.65, sa.4, ss.269-283, 2002 (SCI-Expanded)

Predicting the Schmidt hammer values of in-situ intact rock from core sample values

KAHRAMAN S., Fener M., Gunaydin O.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.39, sa.3, ss.395-399, 2002 (SCI-Expanded)

The effects of fracture roughness on P-wave velocity

KAHRAMAN S.

ENGINEERING GEOLOGY , cilt.63, sa.3-4, ss.347-350, 2002 (SCI-Expanded)

Estimating the direct P-wave velocity value of intact rock from indirect laboratory measurements

KAHRAMAN S.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.39, sa.1, ss.101-104, 2002 (SCI-Expanded)

Evaluation of simple methods for assessing the uniaxial compressive strength of rock

KAHRAMAN S.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.38, sa.7, ss.981-994, 2001 (SCI-Expanded) Sürdürülebilir Kalkınma

A correlation between P-wave velocity, number of joints and Schmidt hammer rebound number

KAHRAMAN S.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.38, sa.5, ss.729-733, 2001 (SCI-Expanded)

Prediction of the penetration rate of rotary blast hole drills using a new drillability index

KAHRAMAN S., Balcı C., Yazici S., Bilgin N.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.37, sa.5, ss.729-743, 2000 (SCI-Expanded)

Rotary and percussive drilling prediction using regression analysis

KAHRAMAN S.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.36, sa.7, ss.981-989, 1999 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

A New Rock Mass Cuttability Classification for Roadheaders Used in Coal Mining

Dibavar B., KAHRAMAN S., Rostami M., FENER M.

Mining, Metallurgy and Exploration , cilt.40, sa.4, ss.1141-1152, 2023 (Scopus)

The effect of clay content on the relation between uniaxial compressive strength and needle penetration index for clay-bearing rocks

KAHRAMAN S., Aloglu A. S., Saygin E., Aydin B.

INTERNATIONAL JOURNAL OF GEO-ENGINEERING , cilt.12, sa.1, 2021 (ESCI)

Evaluating the grinding process of granitic rocks using the physico-mechanical and mineralogical properties

KAHRAMAN S., UÇURUM M., Yogurtcuoglu E., FENER M.

JOURNAL OF METALS MATERIALS AND MINERALS , cilt.29, sa.2, ss.51-57, 2019 (ESCI)

Estimation of Durability Aspects of Al Masjid Al-Haram Marble, Makkah City, Saudi Arabia

Abd El Aal A., KAHRAMAN S.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING , cilt.35, sa.6, ss.2763-2779, 2017 (ESCI)

Indirect Methods to Predict the Abrasion Resistance and Slake Durability of Marbles

Abd El Aal A., KAHRAMAN S.

JOURNAL OF MOLECULAR AND ENGINEERING MATERIALS , cilt.5, sa.2, 2017 (ESCI)

Rock characterization while drilling and application of roof bolter drilling data for evaluation of ground conditions

Rostami J., KAHRAMAN S., Naeimipour A., Collins C.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING , cilt.7, sa.3, ss.273-281, 2015 (ESCI)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

The Effect of Microwave Treatment on the Strength of Nigde Marble

KAHRAMAN S., Rostami M.

2nd International conference on Mediterranean Geosciences Union, MedGU 2022, Marrakech, Fas, 27 - 30 Kasım 2022, ss.25-27

Evaluating the surface temperatures and the strength of igneous rocks treated by microwave

KAHRAMAN S., CANPOLAT N., FENER M.

ISRM International Symposium - EUROCK 2020, 14 - 19 Eylül 2020

Predicting the noise level during sawing of carbonate rocks from the P-wave velocity

KAHRAMAN S., DELİBALTA M. S., ÇOMAKLI R.

23rd International Congress on Acoustics, Aachen, Almanya, 9 - 13 Eylül 2019, ss.7602-7607

The Effect of Water Saturation on the P-wave velocity of Sedimentary Rocks

KAHRAMAN S.

23rd Int. Congr. on Acoustics, 9 - 13 Eylül 2019

Karbonatlı Kayaçların Schmidt Çekici Değerleri Üzerinde Su İçeriğinin Etkisi

KAHRAMAN S., FENER M.

4. Int. Conf. on Civil, Environmental, Geology and Mining Engineering, 20 - 22 Nisan 2019, cilt.151

Predicting the Design Parameters of The TBMs Using Regression and Artificial Neural Network Analysis

KAHRAMAN S., GÜNAYDIN O.

4. Int. Conf. on Civil, Environmental, Geology and Mining Engineering, 20 - 22 Nisan 2019, ss.854-864

The Evaluation of the Abrasivity Characteristics of Igneous Rocks

KAHRAMAN S., SAYGIN E., Sarbangholi F., FENER M.

10th Asian Rock Mechanics Symposium, 29 Ekim - 03 Kasım 2018

Effect of Microwave Treatment on Strength of İgneous Rocks

KAHRAMAN S., FENER M., Canpolat N., Yurdacan A.

4.Uluslararası Yeraltı Kazıları Sempozyumu, 13 - 14 Eylül 2018

Needle Penetration Index to Estimate Performance of Transverse Type Roadheaders

KAHRAMAN S., SAYGIN E., ROSTAMI M.

4. Uluslararası Yeraltı Kazıları Sempozyumu, 13 - 14 Eylül 2018

Estimation of the strength of Konya pyroclastic rocks from P-wave velocity

KAHRAMAN S., Gün T. K., Güneş B., İNCE İ.

the 3rd international conference on rock dynamics and applications (ROCDYN-3), 26 - 27 Haziran 2018, ss.641-644

The effect of water saturation on P-wave velocity for igneous rocks

KAHRAMAN S., FENER M.

Rock Dynamics and Applications 3: Proceedings of the 3rd International Confrence on Rock Dynamics and Applications (RocDyn-3), June 26-27, 2018, Trondheim, Norway, 26 - 27 Haziran 2018

Suya Doygunluğun Karbonatlı Kayaçların Dayanımı Üzerinde Etkisinin Araştırılması

KAHRAMAN S., AYDIN H.

Türkiye 9. Uluslararası Mermer ve Doğaltaş Kongresi, 13 - 15 Aralık 2017, ss.325-330

Piroklastik Kayaçların Suda Dağılmaya Karşı DuraylılıklarınınDolaylı Deneylerden Tahmini

KAHRAMAN S., FENER M., GÜNAYDIN O.

Türkiye 9. Uluslararası Mermer ve Doğaltaş Kongresi ve Sergisi, 13 - 15 Aralık 2017, ss.337-341

Indentation Hardness Test to Predict the Strength of Pyroclastic Rocks Used as Building Stones

KAHRAMAN S., SARIBIYIK M.

9th International Marble and Natural Stones Congress, 13 - 15 Aralık 2017, ss.331-336

A REVIEW OF THE RESEARCH ON THE MICROWAVE ASSISTED BREAKAGE OF HARD ROCKS

KAHRAMAN S., BALCI C., Sarbangholi F., Saygın E., Karpuz C.

Tunnelturkey 2017, 2 - 03 Aralık 2017, ss.1-10

A review of the research on the microwave assisted breakage of hard rocks

KAHRAMAN S., BALCI C., Sarbangholi F., SAYGIN E., KARPUZ C.

Int. Tunneling Symposium in Turkey, 2 - 03 Aralık 2017, ss.212-222

Delik derinliğinin darbeli delicilerin delme hızı üzerinde etkisi

KAHRAMAN S., DEVELİ K.

IX. Uluslararası Delme Patlatma Sempozyumu, 1 - 02 Aralık 2017, ss.3-8

Estimating Roadheader Performance from the Point Load Index

KAHRAMAN S., Aloglu A. S., AYDIN B., SAYGIN E.

7th Int. Symp. Tunnels and Undergr. Structures in SEE, 3 - 05 Mayıs 2017, ss.70-77

Predicting the Physico-Mechanical Properties of Konya Pyroclastic Rocks from the Needle Penetration Index

KAHRAMAN S., GÜNEŞ B., GÜN T. K., İNCE İ.

New Trends in Mining Proceedings of 25th International Mining Congress of Turkey (IMCET ), Türkiye, 11 - 14 Nisan 2017, ss.129-134

The effect of mineralogy on the abrasivity of rocks

KAHRAMAN S., FENER M., KASLING H., THURO K.

2nd Int. Conf. Tunnel Boring Machines in Difficult Grounds, 16 - 18 Kasım 2016

The Effect of Clay Content on the Needle Penetration Index for Clay Bearing Rocks

KAHRAMAN S., ALOĞLU A. S., AYDIN B., SAYGIN E.

Int. Black Sea Mining & Tunnelling Symposium, 2 - 04 Kasım 2016

The effect of clay content on the strength of clay bearing rocks

KAHRAMAN S., ALOĞLU A. S., AYDIN B., SAYGIN E.

9th Asian Rock Mechanics Symposium, 18 - 20 Ekim 2016

Predicting the Performance of an Axial Roadheader in Mine Roadway Excavation from the Needle Penetration Index

KAHRAMAN S., ALOĞLU A. S., AYDIN B., EGEMEN S.

. 9th Asian Rock Mechanics Symposium, 18 - 20 Ekim 2016

Estimating the rock strength from a crushability index

KAHRAMAN S., TORAMAN Ö. Y.

EUROCK 2016, 29 - 31 Ağustos 2016

The relation between uniaxial compressive and Brazilian tensile strength

ROSTAMI J., KAHRAMAN S., YU X., ÇOPUR H., BALCI C., BAMFORD W., et al.

EUROCK 2016, 29 - 31 Ağustos 2016

Application of Gene Expression Programming GEP in Predicting Uniaxial Compressive Strength of Pyroclastic Rocks

İNCE İ., FENER M., KAHRAMAN S.

ICGS 2016: 18th International Conference on Geological Sciences, 15 - 16 Ağustos 2016

The predictability of physico mechanical properties of pyroclastic rocks from the needle penetration index

KAHRAMAN S., YUMSAK S. M., KOYUNCU Y. A.

50th US Rock Mechanics/Geomechanics Symposium, 26 - 29 Haziran 2016

The effect of water saturation on the strength of sedimentary rock

KAHRAMAN S., FENER M.

1st International Conference Mining in Europe, 18 - 19 Mayıs 2016

Predicting the performance of transverse type roadheaders from the needle penetration index in mine roadway excavation

KAHRAMAN S., SAYGIN E.

1st International Conference Mining in Europe, 18 - 19 Mayıs 2016

Predicting average block size of blasted rock in calcite quarries using regression and artificial neural networks analysis

KAHRAMAN S., AYKAN B.

23rd International Symposium on Mine planning & Equipment Selection, Johannesburg, Güney Afrika, 8 - 11 Kasım 2015, ss.701-710

Bilirkişi Raporları

08 09 2015 tarih ve 2015 757 Talimat nolu Ankara 12 İş Mahkemesi hakimliğinin talimatıyla istenilen Soma İş mahkemesine ait 2015 249 sayılı dosyaya yönelik bilirkişi raporu

ÖZÇELİK Y., KAHRAMAN S., TERCAN A. E.

2015

Metrikler

Yayın

118

Atıf (WoS)

2824

H-İndeks (WoS)

Atıf (Scopus)

3617

H-İndeks (Scopus)

Proje

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Bilirkişi Raporları

Metrikler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Proje

Tez Danışmanlığı

Açık Erişim