Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Development of a Numerical Model for the Modal Analysis of a Gun Control Unit Column with Isolator

Dograr T., SABUNCUOĞLU B.
JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES , cilt.11, sa.7, ss.2955-2968, 2023 (SCI-Expanded) identifier identifier

Dynamic stress concentrations around a single fiber break in unidirectional composites: a 3D finite element analysis

MUTLU Ç., SABUNCUOĞLU B., Kadioglu F. S., Swolfs Y.
Journal of Reinforced Plastics and Composites , cilt.42, sa.19-20, ss.1075-1087, 2023 (SCI-Expanded) identifier identifier

Impact behavior of sandwich composites for aviation applications: A review

Karsandik Y., SABUNCUOĞLU B., YILDIRIM B., Silberschmidt V. V.
Composite Structures , cilt.314, 2023 (SCI-Expanded) identifier identifier

Experimental and analytical investigation of the tensile behavior of 3D-printed composites based on micro-CT analysis

ŞIK A., Tanabi H., ÇUBUKÇU H. E., SABUNCUOĞLU B.
Journal of Thermoplastic Composite Materials , 2023 (SCI-Expanded) identifier

Stress analysis of vascularized glass fiber composites exposed to bending loading

Tanabi H., Atasoy A. G., Demiral M., Sabuncuoğlu B.
ADVANCED COMPOSITE MATERIALS , cilt.31, sa.2, ss.208-220, 2022 (SCI-Expanded) identifier identifier

Investigation of stress distributions between a frictional rigid cylinder and laminated glass fiber composites

Yilmaz K. B., Sabuncuoglu B., Yildirim B.
ACTA MECHANICA , cilt.232, sa.11, ss.4379-4403, 2021 (SCI-Expanded) identifier identifier

Development of a procedure to model the mechanical behavior of composites with embedded element method by considering the matrix non-linearity

ŞIK A., GÜRSES E., SABUNCUOĞLU B.
COMPOSITE STRUCTURES , cilt.259, 2021 (SCI-Expanded) identifier identifier

Development of an artificial neural network using parametric correlation technique for the determination of machined torsional spring stiffness

SABUNCUOĞLU B., Demirtas O.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.36, sa.1, ss.105-118, 2021 (SCI-Expanded) Creative Commons License identifier identifier identifier

Mesh stiffness of micro-spur gears by finite element formulations based on modified couple stress theory

Pehlivanoglu Y., Aydogan M. O., SABUNCUOĞLU B.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS , cilt.26, sa.12, ss.3829-3838, 2020 (SCI-Expanded) identifier identifier

Experimental and numerical investigation of transverse shear behavior of glass-fibre composites with embedded vascular channel

Demiral M., Tanabi H., SABUNCUOĞLU B.
COMPOSITE STRUCTURES , cilt.252, 2020 (SCI-Expanded) identifier identifier

A brief review on the mechanical behavior of nonwoven fabrics

YILMAZ K. B., SABUNCUOĞLU B., YILDIRIM B., Silberschmidt V. V.
JOURNAL OF ENGINEERED FIBERS AND FABRICS , cilt.15, 2020 (SCI-Expanded) identifier identifier

Fiber/matrix interface stress analysis of flax-fiber composites under transverse loading considering material nonlinearity

SABUNCUOĞLU B., Cakmakci O., KADIOĞLU F. S.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.39, ss.345-360, 2020 (SCI-Expanded) identifier identifier

Stress redistribution around fiber breaks in unidirectional steel fiber composites considering the nonlinear material behavior

SABUNCUOĞLU B., MUTLU Ç., KADIOĞLU F. S., Swolfs Y.
COMPOSITE STRUCTURES , cilt.239, 2020 (SCI-Expanded) Creative Commons License identifier identifier

Micro-CT analysis of deviations in fiber orientation and composite stiffness near the microvascular channels embedded in glass-fiber reinforced composites

SABUNCUOĞLU B., Tanabi H., Soete J., Lomov S.
COMPOSITE STRUCTURES , cilt.237, 2020 (SCI-Expanded) identifier identifier

Micro-scale numerical study of fiber/matrix debonding in steel fiber composites

SABUNCUOĞLU B., Lomov S.
JOURNAL OF ENGINEERED FIBERS AND FABRICS , cilt.15, 2020 (SCI-Expanded) identifier identifier

Deformation and damage of random fibrous networks

Sozumert E., Farukh F., SABUNCUOĞLU B., Demirci E., Acar M., Pourdeyhimi B., et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.184, ss.233-247, 2020 (SCI-Expanded) identifier identifier

Investigation of stress distributions in the resin rich region and failure behavior in glass fiber composites with microvascular channels under tensile loading

Al-Shawk A., Tanabi H., Sabuncuoglu B.
COMPOSITE STRUCTURES , cilt.192, ss.101-114, 2018 (SCI-Expanded) identifier identifier

Analysis of stress concentrations in transversely loaded steel-fiber composites with nano-reinforced interphases

Sabuncuoglu B., GORBATİKH L., Lomov S. V.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.130, ss.248-257, 2018 (SCI-Expanded) identifier identifier

Evaluation of Fatigue Behavior of Lead-Free Solder Joints in Four-Point Bending Test by Finite-Element Modeling

Sabuncuoglu B., VANHEE F., WİLLEMS G., VANDEVELDE B., VANDEPİTTE D.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY , cilt.7, sa.12, ss.1957-1964, 2017 (SCI-Expanded) identifier identifier

Full-field strain measurements at the micro-scale in fiber-reinforced composites using digital image correlation

Mehdikhani M., Aravand M., Sabuncuoglu B., Callens M. G., Lomov S. V., Gorbatikh L.
COMPOSITE STRUCTURES , cilt.140, ss.192-201, 2016 (SCI-Expanded) identifier identifier

Micro-scale finite element analysis of stress concentrations in steel fiber composites under transverse loading

Sabuncuoglu B., Orlova S., Gorbatikh L., Lomov S. V., Verpoest I.
JOURNAL OF COMPOSITE MATERIALS , cilt.49, sa.9, ss.1057-1069, 2015 (SCI-Expanded) identifier identifier

Mechanical analysis of bi-component-fibre nonwovens: Finite-element strategy

Farukh F., Demirci E., Sabuncuoglu B., Acar M., Pourdeyhimi B., Silberschmidt V. V.
COMPOSITES PART B-ENGINEERING , cilt.68, ss.327-335, 2015 (SCI-Expanded) Creative Commons License identifier identifier

On the high stress concentrations in steel fiber composites under transverse loading

Sabuncuoglu B.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.33, sa.21, ss.1941-1953, 2014 (SCI-Expanded) identifier identifier

Mechanical behaviour of nonwovens: Analysis of effect of manufacturing parameters with parametric computational model

Farukh F., Demirci E., Sabuncuoglu B., Acar M., Pourdeyhimi B., Silberschmidt V. V.
COMPUTATIONAL MATERIALS SCIENCE , cilt.94, ss.8-16, 2014 (SCI-Expanded) Creative Commons License identifier identifier

Numerical analysis of progressive damage in nonwoven fibrous networks under tension

Farukh F., Demirci E., Sabuncuoglu B., Acar M., Pourdeyhimi B., Silberschmidt V. V.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.51, sa.9, ss.1670-1685, 2014 (SCI-Expanded) identifier identifier

Finite element modelling of fibrous networks: Analysis of strain distribution in fibres under tensile load

Sabuncuoglu B., Acar M., Silberschmidt V. V.
COMPUTATIONAL MATERIALS SCIENCE , cilt.79, ss.143-158, 2013 (SCI-Expanded) identifier identifier

Parametric code for generation of finite-element model of nonwovens accounting for orientation distribution of fibres

Sabuncuoglu B., Acar M., Silberschmidt V. V.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING , cilt.94, sa.5, ss.441-453, 2013 (SCI-Expanded) identifier identifier

Characterisation and numerical modelling of complex deformation behaviour in thermally bonded nonwovens

Farukh F., Demirci E., Sabuncuoglu B., Acar M., Pourdeyhimi B., Silberschmidt V. V.
COMPUTATIONAL MATERIALS SCIENCE , cilt.71, ss.165-171, 2013 (SCI-Expanded) Creative Commons License identifier identifier

Analysis of rate-dependent tensile properties of polypropylene fibres used in thermally bonded nonwovens

Sabuncuoglu B., Demirci E., Acar M., Silberschmidt V. V.
JOURNAL OF THE TEXTILE INSTITUTE , cilt.107, sa.9, ss.965-971, 2013 (SCI-Expanded) identifier identifier

Finite element modelling of thermally bonded nonwovens: Effect of manufacturing parameters on tensile stiffness

Sabuncuoglu B., Acar M., Silberschmidt V. V.
COMPUTATIONAL MATERIALS SCIENCE , cilt.64, ss.192-197, 2012 (SCI-Expanded) identifier identifier

Numerical modelling of damage initiation in low-density thermally bonded nonwovens

Farukh F., Demirci E., Sabuncuoglu B., Acar M., Pourdeyhimi B., Silberschmidt V. V.
COMPUTATIONAL MATERIALS SCIENCE , cilt.64, ss.112-115, 2012 (SCI-Expanded) Creative Commons License identifier identifier

A parametric finite element analysis method for low-density thermally bonded nonwovens

Sabuncuoglu B., Acar M., Silberschmidt V. V.
COMPUTATIONAL MATERIALS SCIENCE , cilt.52, sa.1, ss.164-170, 2012 (SCI-Expanded) Creative Commons License identifier identifier

Three dimensional computational analysis of fatigue crack propagation in functionally graded materials

Sabuncuoglu B., DAĞ S., YILDIRIM B.
COMPUTATIONAL MATERIALS SCIENCE , cilt.52, sa.1, ss.246-252, 2012 (SCI-Expanded) identifier identifier

Analysis of Creep Behavior of Polypropylene Fibers

SABUNCUOĞLU B., Svetlana O.
Applied Mechanics and Materials , cilt.70, ss.410-415, 2011 (SCI-Expanded) Creative Commons License identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Sonlu elemanlar yöntemi ile yorulma çatlağı ilerlemesi simülasyonu

SABUNCUOĞLU B., DAĞ S., YILDIRIM B.
Makina Tasarım ve İmalat , cilt.7, ss.87-95, 2005 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

DETERMINATION OF FIBER ORIENTATIONS AND STIFFNESS PROPERTIES VIA MICRO-CT SCAN IMAGES: APPLICATION TO COMPOSITE MATERIALS WITH MICROVASCULAR CHANNELS

SABUNCUOĞLU B., TEKİN H., Soete J., Lomov S.
UMTIK 2022, Türkiye, 31 Ağustos 2022

Development of a modeling strategy to improve the embedded element method in composites modeling in case of matrix nonlinearity

ŞIK A., GÜRSES E., SABUNCUOĞLU B.
Fibremod Conference, Leuven, Belçika, 9 - 12 Aralık 2019

Fiber/Matrix Interface Debonding in Steel-Fiber Composites

SABUNCUOĞLU B., Tabatabaei S., Lomov S.
Workshop on”Plasticity, Damage and Fracture ofEngineering Materials, Türkiye, 25 Ekim 2018

Analysis of Fiber/Matrix Interface Debonding in Steel Fiber Composites under Transverse Loading

SABUNCUOĞLU B., Tabatabaei S., Lomov S. V.
18th European Conference on Composite Materials (ECCM 18), 24 - 27 Haziran 2018

Stress Concentrations in Composites with Microvascular Channels

AL SHAWK A., TANABİ H., SABUNCUOĞLU B.
Procedia Structural Integrity, 25 - 26 Eylül 2017 identifier identifier

Notches in fibrous materials: micro-mechanisms of deformation and damage

Sozumert E., Farukh F., Sabuncuoglu B., Demirci E., Acar M., Pourdeyhimi B., et al.
27th International Conference on Mathematical and Computer Simulations in Mechanics of Solids and Structures - Fundamentals of Static and Dynamic Fracture (MCM), Saint Peter, Guernsey Ve Alderney, 25 - 27 Eylül 2017, cilt.6, ss.168-173 identifier identifier

Digital image correlation and finite element analysis applied to fiber reinforced composites at the micro scale

Mehdikhani M., Aravand M. A., SABUNCUOĞLU B., Callens M. G., Lomov S., Gorbatikh L.
20th International Conference on Composite Materials, Kopenhag, Danimarka, 19 - 24 Temmuz 2015 identifier

The Effect of Nano-reinforced fiber matrix interface on stress in steel fiber composites

SABUNCUOĞLU B., SÖKMEN Ö.
ECCM16 - 16TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Sevilla, İspanya, 22 - 26 Haziran 2014

Mechanical Behaviour of Nonwovens Analysis of Effects of Manufacturing Parameters with Parametric Computational Model

SABUNCUOĞLU B., Acar M., Silberschmidt V.
23nd International Workshop on Computational Mechanics of Materials, Singapore, Singapur, 2 - 04 Ekim 2013

Analysis of Stress Distributions in Steel Fibre Reinforced Composites in Micro Scale Including Large Deformations

SABUNCUOĞLU B., Sökmen Ö.
IV ECCOMAS Thematic Conference on the Mechanical Response of Composites, Azorlar, Portekiz, 25 - 27 Eylül 2013

Micro mechanical Analysis of Stresses in Steel Fibre Reinforced Composites

SABUNCUOĞLU B., Sökmen Ö.
TEXCOMP-11 CONFERENCE, Leuven, Belçika, 16 Eylül 2013 - 20 Haziran 2014

Mıcro scale computational analysis of the effect of matrix properties on the stress distribution of steel fiber composites

SABUNCUOĞLU B., Sökmen Ö.
24th Annual Internatıonal SICOMP Conference on Manufacturing and Design of Composites, 30 - 31 Mayıs 2013

Characterisation and Numerıcal Modelling of Deformation and Damage In Thermally Bonded Nonwovens

SABUNCUOĞLU B., Acar M., Silberschmidt V.
22nd International Workshop on Computational Mechanics of Materials, Baltimore, Amerika Birleşik Devletleri, 24 - 26 Eylül 2012

Finite element modeling of solder joint fatigue in four-point bending test

Sabuncuoglu B., Vanhee F., Willems G., Vandevelde B., Vandepitte D., De Wolf I.
2012 13th International Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2012, Cascais, Portekiz, 16 - 18 Nisan 2012 identifier

Analysis of Creep Behavior of Polypropylene Fibers Edinburg

SABUNCUOĞLU B., Acar M., Silberschmidt V.
International Conference on Advances in Experimental Mechanics: Integrating Simulation and Experimentation (ISEV2011), Edinburgh, Birleşik Krallık, 7 - 09 Eylül 2011

Finite Element Modelling of Thermally Bonded Nonwoven Mater ials A Parametr ic Model with Or ientation Based Distr ibution of Fibres

SABUNCUOĞLU B., Acar M., Silberschmidt V.
21st International Workshop on Computational Mechanics of Materials, Limerick, İrlanda, 21 - 24 Ağustos 2011

Analysis of Creep Behavior of Polypropylene Fibers

Sabuncuoglu B., Acar M., Silberschmidt V. V.
8th International Conference on Advances in Experimental Mechanics: Integrating Simulation and Experimentation for Validation, Edinburgh, Saint Helena, 7 - 09 Eylül 2011, cilt.70, ss.410-415 identifier identifier

Three Dimensional Fatigue Crack Growth Analysis of Functionally Graded Materials

SABUNCUOĞLU B., Sökmen Ö.
20th International Workshop on Computational Mechanics of Materials, Loughborough, Birleşik Krallık, 8 - 10 Eylül 2010

Finite Element Analysis of Thermally Bonded Nonwovens Under Large Deformation A Discontinuous Model with a Large Number of Fibres

SABUNCUOĞLU B., Acar M., Silberschmidt V.
20th International Workshop on Computational Mechanics of Materials, Loughborough, Birleşik Krallık, 8 - 10 Eylül 2010

Fatigue crack growth analysis models for functionally graded materials

DAĞ S., Sabuncuoglu B., YILDIRIM B.
9th International Conference on Multiscale and Functionally Graded Materials, Hawaii, Amerika Birleşik Devletleri, 15 - 18 Ekim 2006, cilt.973, ss.423-424 identifier

Elliptical cracks in functionally graded materials under repeated loading

SABUNCUOĞLU B., Sökmen Ö.
The Third International Conference on Advances in Mechanical Engineering and Mechanics, Hammamet, Tunus, 17 - 19 Aralık 2006

Fatıgue crack growth analysis models for functionally graded materials

SABUNCUOĞLU B., Sökmen Ö.
Multiscale & Functionally Graded Materials Conference 2006, Hawaii, Amerika Birleşik Devletleri, 15 - 18 Ekim 2006

A computational procedure for fatigue crack growth simulatiın in functionally graded composites

SABUNCUOĞLU B., Sökmen Ö.
12th International Conference on Machine Design and Production, Kuşadası, Türkiye, 5 - 08 Eylül 2006

Patlayıcı depolama koşulları yapısal analizleri ve isil çevrim altında ömrünün belirlenmesi

SABUNCUOĞLU B., Sökmen Ö.
MSC Kullanici Kongresi 2006, İstanbul, Türkiye, 21 - 23 Haziran 2006

Fatigue Crack Growth Simulation Using ANSYS

SABUNCUOĞLU B., Sökmen Ö.
Bilgisayar Destekli Mühendislik ve Sistem Modellemesi, İstanbul, Türkiye, 25 Kasım 2005

Fonksiyonel derecelendirilmiş malzemelede için yorulma çatlağı ilerlemesi

SABUNCUOĞLU B., Sökmen Ö.
14. Ulusal Mekanik Kongresi, Antakya, Türkiye, 21 - 23 Eylül 2005

Metrikler

Yayın

61

Atıf (WoS)

232

H-İndeks (WoS)

9

Atıf (Scopus)

496

H-İndeks (Scopus)

12

Proje

9

Tez Danışmanlığı

13

Açık Erişim

8