Prof.Dr. YILMAZ ÖZÇELİK

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Investigation of the effect of caving height on the efficiency of the longwall top coal caving production method applied in inclined and thick coal seams by physical modeling

Çelik A., ÖZÇELİK Y.

International Journal of Rock Mechanics and Mining Sciences , cilt.162, 2023 (SCI-Expanded)

The effect of mineralogy on the microwave assisted cutting of igneous rocks

KAHRAMAN S., Sarbangholi F. S., Balcı C., FENER M., KARPUZ C., Comakli R., et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.81, sa.1, 2022 (SCI-Expanded)

Investigation of the effects of coal seam slope and top coal drawn height on top coal recovery ratio in longwall top coal caving method applied in steep inclined thick coal seams

Celik A., ÖZÇELİK Y.

ARABIAN JOURNAL OF GEOSCIENCES , cilt.15, sa.2, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

Investigation of the efficiency of longwall top coal caving method applied by forming a face in horizontal thickness of the seam in steeply inclined thick coal seams by using a physical model

Celik A., ÖZÇELİK Y.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.148, 2021 (SCI-Expanded)

Laboratory Studies on Soil Conditioning of Sand in the Mechanized Tunneling

Pourmand S., Chakeri H., Sharghi M., Bonab M. H., ÖZÇELİK Y.

JOURNAL OF TESTING AND EVALUATION , cilt.48, sa.5, ss.3658-3672, 2020 (SCI-Expanded)

Numerical investigation into the effect of stepping on the circumferential joint in the precast tunnel segments under TBM thrust jacks

Karimi M., Chakeri H., Namin F. S., Sharghi M., ÖZÇELİK Y.

ARABIAN JOURNAL OF GEOSCIENCES , cilt.13, sa.15, 2020 (SCI-Expanded)

Prediction of TBM jamming risk in squeezing grounds using Bayesian and artificial neural networks

Hasanpour R., Rostami J., Schmitt J., ÖZÇELİK Y., Sohrabian B.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING , cilt.12, sa.1, ss.21-31, 2020 (SCI-Expanded)

An Experimental Study of the Performance of Two-Component Backfilling Grout Used behind the Segmental Lining of a Tunnel-Boring Machine

Sharghi M., Chakeri H., Afshin H., ÖZÇELİK Y.

JOURNAL OF TESTING AND EVALUATION , cilt.46, sa.5, ss.2083-2099, 2018 (SCI-Expanded)

Prediction of mono-wire cutting machine performance parameters using artificial neural network and regression models

YILMAZKAYA E., DAĞDELENLER G., ÖZÇELİK Y., SÖNMEZ H.

ENGINEERING GEOLOGY , cilt.239, ss.96-108, 2018 (SCI-Expanded) Sürdürülebilir Kalkınma

Examining the effect of adverse geological conditions on jamming of a single shielded TBM in Uluabat tunnel using numerical modeling

Hasanpour R., Schmitt J., ÖZÇELİK Y., Rostami J.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING , cilt.9, sa.6, ss.1112-1122, 2017 (SCI-Expanded)

Analysis of bead wear in diamond wire sawing considering the rock properties and production rate

Almasi S. N., Bagherpour R., Mikaeil R., ÖZÇELİK Y.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.76, sa.4, ss.1593-1607, 2017 (SCI-Expanded)

Investigation into the effects of two component grout properties on surface settlements

Sharghi M., Chakeri H., ÖZÇELİK Y.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY , cilt.63, ss.205-216, 2017 (SCI-Expanded)

Estimating major elemental oxides of an andesite quarry using compositional kriging

SOHRABIAN B., ÖZÇELİK Y., HASANPOUR R.

INTERNATIONAL JOURNAL OF MINING RECLAMATION AND ENVIRONMENT , cilt.31, sa.7, ss.475-487, 2017 (SCI-Expanded)

Comparison of Hoek-Brown and Mohr-Coulomb failure criterion for deep open coal mine slope stability

Aksoy C. O., Uyar G. G., Özçelik Y.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.60, ss.809-828, 2016 (SCI-Expanded) Sürdürülebilir Kalkınma

Impact of Overcut on Interaction Between Shield and Ground in the Tunneling with a Double-shield TBM

Hasanpour R., Rostami J., ÖZÇELİK Y.

ROCK MECHANICS AND ROCK ENGINEERING , cilt.49, sa.5, ss.2015-2022, 2016 (SCI-Expanded)

The Effects of Operational Parameters on a Mono-wire Cutting System: Efficiency in Marble Processing

YILMAZKAYA E., ÖZÇELİK Y.

ROCK MECHANICS AND ROCK ENGINEERING , cilt.49, sa.2, ss.523-539, 2016 (SCI-Expanded)

Investigation of ground surface settlement in twin tunnels driven with EPBM in urban area

Chakeri H., ÖZÇELİK Y., ÜNVER B.

ARABIAN JOURNAL OF GEOSCIENCES , cilt.8, sa.9, ss.7655-7666, 2015 (SCI-Expanded) Sürdürülebilir Kalkınma

Effects of high temperature on physico-mechanical properties of Turkish natural building stones

OZGUVEN A., ÖZÇELİK Y.

ENGINEERING GEOLOGY , cilt.183, ss.127-136, 2014 (SCI-Expanded)

Investigation of surface and subsurface displacements due to multiple tunnels excavation in urban area

Talebinejad A., Chakeri H., Moosavi M., ÖZÇELİK Y., ÜNVER B., HİNDİSTAN M. A.

ARABIAN JOURNAL OF GEOSCIENCES , cilt.7, sa.9, ss.3913-3923, 2014 (SCI-Expanded)

Water absorption and drying features of different natural building stones

ÖZÇELİK Y., OZGUVEN A.

CONSTRUCTION AND BUILDING MATERIALS , cilt.63, ss.257-270, 2014 (SCI-Expanded)

A novel relationship for predicting the point of inflexion value in the surface settlement curve

CHAKERI H., ÜNVER B., ÖZÇELİK Y.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY , cilt.43, ss.266-275, 2014 (SCI-Expanded) Sürdürülebilir Kalkınma

Prediction of engineering properties of rocks from microscopic data

ÖZÇELİK Y., Bayram F., Yasitli N. E.

ARABIAN JOURNAL OF GEOSCIENCES , cilt.6, sa.10, ss.3651-3668, 2013 (SCI-Expanded)

Effects of important factors on surface settlement prediction for metro tunnel excavated by EPB

CHAKERI H., ÖZÇELİK Y., ÜNVER B.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY , cilt.36, ss.14-23, 2013 (SCI-Expanded)

Ranking the sawability of ornamental stone using Fuzzy Delphi and multi-criteria decision-making techniques

MIKAEIL R., ÖZÇELİK Y., YOUSEFI R., ATAEI M., HOSSEINI S. M.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.58, ss.118-126, 2013 (SCI-Expanded)

Effect of Working Parameters on Excavation Rate and Specific Energy on Surface Treatment With Pure Water Jet

ÖZÇELİK Y., CICCU R., BORTOLUSSI A.

JOURNAL OF TESTING AND EVALUATION , cilt.41, sa.1, ss.104-115, 2013 (SCI-Expanded)

Optimization of limestone sawing using circular saws with reference to unit wear and energy

Bayram F., Yasitli N. E., KULAKSIZ S., ÖZÇELİK Y.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.227, ss.1069-1079, 2013 (SCI-Expanded)

Investigation of some property changes of natural building stones exposed to fire and high heat

OZGUVEN A., ÖZÇELİK Y.

CONSTRUCTION AND BUILDING MATERIALS , cilt.38, ss.813-821, 2013 (SCI-Expanded)

Joint simulation of a building stone deposit using minimum/maximum autocorrelation factors

SOHRABIAN B., ÖZÇELİK Y.

CONSTRUCTION AND BUILDING MATERIALS , cilt.37, ss.257-268, 2012 (SCI-Expanded)

Numerical modelling of circular sawing system using discrete element method

Yasitli N. E., Bayram F., ÜNVER B., ÖZÇELİK Y.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.55, ss.86-96, 2012 (SCI-Expanded)

Determination of exploitable blocks in an andesite quarry using independent component kriging

SOHRABIAN B., ÖZÇELİK Y.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.55, ss.71-79, 2012 (SCI-Expanded)

The effects of freeze-thaw cycles on the gloss values of polished stone surfaces

ÖZÇELİK Y., CAREDDU N., YILMAZKAYA E.

COLD REGIONS SCIENCE AND TECHNOLOGY , cilt.82, ss.49-55, 2012 (SCI-Expanded) Sürdürülebilir Kalkınma

Evaluation of surface settlements in the Istanbul metro in terms of analytical, numerical and direct measurements

HASANPOUR R., CHAKERI H., ÖZÇELİK Y., DENEK H.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.71, sa.3, ss.499-510, 2012 (SCI-Expanded)

Optimization of working parameters of water jet cutting in terms of depth and width of cut

ÖZÇELİK Y., GURSEL M., CICCU R., COSTA G., BORTOLUSSI A.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING , cilt.226, ss.64-78, 2012 (SCI-Expanded)

Determination of reactional cutting forces on a circular sawblade machine by using experimental studies and numerical modelling

Yasitli N. E., Bayram F., ÜNVER B., ÖZÇELİK Y.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.226, ss.775-784, 2012 (SCI-Expanded) Sürdürülebilir Kalkınma

A Study of nozzle angle in stone surface treatment with water jets

ÖZÇELİK Y., TERCAN A. E., YILMAZKAYA E., CICCU R., COSTA G.

CONSTRUCTION AND BUILDING MATERIALS , cilt.25, sa.11, ss.4271-4278, 2011 (SCI-Expanded)

The effect of the rock anisotropy on the efficiency of diamond wire cutting machines

ÖZÇELİK Y., YILMAZKAYA E.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.48, sa.4, ss.626-636, 2011 (SCI-Expanded)

CORRELATION OF SPECIFIC AMPERE DRAW WITH ROCK BRITTLENESS INDEXES IN ROCK SAWING PROCESS

Mikaeil R., ÖZÇELİK Y., Ataei M., Yousefi R.

ARCHIVES OF MINING SCIENCES , cilt.56, sa.4, ss.777-788, 2011 (SCI-Expanded)

Canonical ridge correlation of mechanical and engineering index properties

Tercan A. E., Ozcelik Y.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.43, sa.1, ss.58-65, 2006 (SCI-Expanded)

Geostatistical evaluation of dimension-stone quarries

Tercan A. E., Ozcelik Y.

ENGINEERING GEOLOGY , cilt.58, sa.1, ss.25-33, 2000 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Performance Evaluation of Adaptive Neuro-Fuzzy Inference System and Group Method of Data Handling-Type Neural Network for Estimating Wear Rate of Diamond Wire Saw

Mikaeil R., Haghshenas S. S., ÖZÇELİK Y., Gharehgheshlagh H. H.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING , cilt.36, sa.6, ss.3779-3791, 2018 (ESCI)

Investigation of Soil Conditioning Tests with Three-Dimensional Numerical Modeling

Pourmand S., Chakeri H., Sharghi M., ÖZÇELİK Y.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING , cilt.36, sa.5, ss.2869-2879, 2018 (ESCI)

Investigation of Various Parameters Effect on Cerchar Abrasivity Index with PFC3D Modeling

Balani A., Chakeri H., Barzegari G., ÖZÇELİK Y.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING , cilt.35, sa.6, ss.2747-2762, 2017 (ESCI)

Predicting the Building Stone Cutting Rate Based on Rock Properties and Device Pullback Amperage in Quarries Using M5P Model Tree

Almasi S. N., Bagherpour R., Mikaeil R., ÖZÇELİK Y., Kalhori H.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING , cilt.35, sa.4, ss.1311-1326, 2017 (ESCI)

Developing a new rock classification based on the abrasiveness, hardness, and toughness of rocks and PA for the prediction of hard dimension stone sawability in quarrying

Almasi S. N., Bagherpour R., Mikaeil R., ÖZÇELİK Y.

GEOSYSTEM ENGINEERING , cilt.20, sa.6, ss.295-310, 2017 (ESCI)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Kitap & Kitap Bölümleri

Delme-Patlatma

UYAR G. G., AKSOY C. O., AYDINER K., FİŞNE A., CİHANGİR F., ÖZÇELİK Y., et al.

Temel Madencilik Bilgileri, C.Okay Aksoy, Eren Kömürlü, H. Eray Yaman,, Editör, mAYEB, 2017

Bilirkişi Raporları

Tokat Sulh Ceza Mahkemesinin 2015 2saylı talimatı ile 2014 2 D İş dava dosyasında farklı bilirlişilere ait raporlar arasındaki çelişkilerin giderilmesi amacıyla bilirkişi raporu

ÖZÇELİK Y., UYAR G. G., İLKER D.

2015

08 09 2015 tarih ve 2015 757 Talimat nolu Ankara 12 İş Mahkemesi hakimliğinin talimatıyla istenilen Soma İş mahkemesine ait 2015 249 sayılı dosyaya yönelik bilirkişi raporu

ÖZÇELİK Y., KAHRAMAN S., TERCAN A. E.

2015

Tokat Sulh Ceza Mahkemesinin 2015 2 sayılı Talimatı ile 2014 2 D İş dava dosyasında farklı bilirkişilere ait raporlar arasındaki çelişkilerin giderilmesi amacıyla bilirkişi raporu

UYAR G. G., ÖZÇELİK Y., Demirdir İ.

2015

Metrikler

Yayın

Atıf (WoS)

476

H-İndeks (WoS)

Atıf (Scopus)

355

H-İndeks (Scopus)

Proje

Tez Danışmanlığı

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Kitap & Kitap Bölümleri

Bilirkişi Raporları

Metrikler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Proje

Tez Danışmanlığı