Yayınlar & Eserler

Yayın Ağı
Makaleler 33
Tümü (33)
SCI-E, SSCI, AHCI (30)
SCI-E, SSCI, AHCI, ESCI (32)
ESCI (2)
Scopus (29)
Diğer Yayınlar (1)

1. Evaluation of rock stability challenges affecting the formation of sustainable pit lake towards mine closure following crown pillar extraction in open pit-underground mines

Massawe V. A., ÜNVER B.
Journal of Environmental Management , cilt.356, 2024 (SCI-Expanded, Scopus) identifier identifier identifier

2. The effect of mineralogy on the microwave assisted cutting of igneous rocks

KAHRAMAN S., Sarbangholi F. S., Balcı C., FENER M., KARPUZ C., Comakli R., et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.81, sa.1, 2022 (SCI-Expanded, Scopus) identifier identifier

3. Analysis of a possible root cause and mechanism for Soma mine disaster

Unver B., Unal M. S.
JOURNAL OF MINING AND ENVIRONMENT , cilt.10, sa.1, ss.1-26, 2019 (ESCI) Sürdürülebilir Kalkınma identifier

4. Fundamentals of 3D modelling and resource estimation in coal mining

Unver B.
JOURNAL OF MINING AND ENVIRONMENT , cilt.9, sa.3, ss.623-639, 2018 (ESCI) identifier

5. Sustainable lignite resource planning at Thar coalfield, Pakistan

Siddiqui F. I., Pathan A. G., ÜNVER B., ERTUNÇ G.
JOURNAL OF CENTRAL SOUTH UNIVERSITY , cilt.25, sa.5, ss.1165-1172, 2018 (SCI-Expanded, Scopus) identifier identifier

6. Uncertainty-Based Analysis for Agreement of Tensile-Strength Measurement Procedures

TÜTMEZ B., Unver B.
GEOTECHNICAL TESTING JOURNAL , cilt.40, sa.3, 2017 (SCI-Expanded, Scopus) identifier identifier

7. Soma Eynez kömür sahası için farklı bir üretim yöntemi önerisi

ÜNVER B., HİNDİSTAN M. A., TERCAN A. E., ERTUNÇ G., ÜNAL M. S., KILLIOĞLU S. Y., et al.
Bilimsel Madencilik Dergisi , cilt.56, ss.5-12, 2017 (Hakemli Dergi)

8. A cradle to gate life cycle assessment of Turkish lignite used for electricity generation with site-specific data

ŞENGÜL H., BAYRAK F., Koksal M. A., ÜNVER B.
JOURNAL OF CLEANER PRODUCTION , cilt.129, ss.478-490, 2016 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

9. Investigation of ground surface settlement in twin tunnels driven with EPBM in urban area

Chakeri H., ÖZÇELİK Y., ÜNVER B.
ARABIAN JOURNAL OF GEOSCIENCES , cilt.8, sa.9, ss.7655-7666, 2015 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

10. Assessment of tunnel portal stability at jointed rock mass: A comparative case study

SATICI O., ÜNVER B.
COMPUTERS AND GEOTECHNICS , cilt.64, ss.72-82, 2015 (SCI-Expanded, Scopus) identifier identifier

11. Lignite resource estimations and seam modeling of Thar Field, Pakistan

SIDDIQUI F. I., PATHAN A. G., ÜNVER B., TERCAN A. E., HİNDİSTAN M. A., ERTUNÇ G., et al.
INTERNATIONAL JOURNAL OF COAL GEOLOGY , cilt.140, ss.84-96, 2015 (SCI-Expanded, Scopus) identifier identifier

12. Investigation of surface and subsurface displacements due to multiple tunnels excavation in urban area

Talebinejad A., Chakeri H., Moosavi M., ÖZÇELİK Y., ÜNVER B., HİNDİSTAN M. A.
ARABIAN JOURNAL OF GEOSCIENCES , cilt.7, sa.9, ss.3913-3923, 2014 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

13. A novel relationship for predicting the point of inflexion value in the surface settlement curve

CHAKERI H., ÜNVER B., ÖZÇELİK Y.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY , cilt.43, ss.266-275, 2014 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

14. A new equation for estimating the maximum surface settlement above tunnels excavated in soft ground

CHAKERI H., ÜNVER B.
ENVIRONMENTAL EARTH SCIENCES , cilt.71, sa.7, ss.3195-3210, 2014 (SCI-Expanded, Scopus) identifier identifier

15. 3D finite difference model for simulation of double shield TBM tunneling in squeezing grounds

Hasanpour R., Rostami J., ÜNVER B.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY , cilt.40, ss.109-126, 2014 (SCI-Expanded, Scopus) identifier identifier

16. Geostatistical estimation of coal quality variables by using covariance matching constrained kriging

ERTUNÇ G., TERCAN A. E., HİNDİSTAN M. A., ÜNVER B., ÜNAL S., ATALAY F., et al.
INTERNATIONAL JOURNAL OF COAL GEOLOGY , cilt.112, ss.14-25, 2013 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

17. Seam modeling and resource estimation in the coalfields of western Anatolia

TERCAN A. E., ÜNVER B., HİNDİSTAN M. A., ERTUNÇ G., ATALAY F., Unal S., et al.
INTERNATIONAL JOURNAL OF COAL GEOLOGY , cilt.112, ss.94-106, 2013 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

18. Effects of important factors on surface settlement prediction for metro tunnel excavated by EPB

CHAKERI H., ÖZÇELİK Y., ÜNVER B.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY , cilt.36, ss.14-23, 2013 (SCI-Expanded, Scopus) identifier identifier

19. Numerical modelling of circular sawing system using discrete element method

Yasitli N. E., Bayram F., ÜNVER B., ÖZÇELİK Y.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.55, ss.86-96, 2012 (SCI-Expanded, Scopus) identifier identifier

20. Tunneling-induced ground movements on Tehran Metro

Chakeri H., Talebinejad A., Moosavi M., Unver B.
SOIL MECHANICS AND FOUNDATION ENGINEERING , cilt.49, sa.4, ss.132-138, 2012 (SCI-Expanded, Scopus) identifier identifier

21. Effects of a fluoride-containing casein phosphopeptide-amorphous calcium phosphate complex on the shear bond strength of orthodontic brackets

Cehreli S. B., Sar C., Polat-Ozsoy O., ÜNVER B., Ozsoy S.
EUROPEAN JOURNAL OF ORTHODONTICS , cilt.34, sa.2, ss.193-197, 2012 (SCI-Expanded, Scopus) identifier identifier identifier

22. Determination of reactional cutting forces on a circular sawblade machine by using experimental studies and numerical modelling

Yasitli N. E., Bayram F., ÜNVER B., ÖZÇELİK Y.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.226, ss.775-784, 2012 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

23. Analysis of interaction between tunnels in soft ground by 3D numerical modeling

Chakeri H., Hasanpour R., HİNDİSTAN M. A., ÜNVER B.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT , cilt.70, sa.3, ss.439-448, 2011 (SCI-Expanded, Scopus) identifier identifier

24. Geostatistical coal quality control in longwall mining

HİNDİSTAN M. A., TERCAN A. E., Uenver B.
INTERNATIONAL JOURNAL OF COAL GEOLOGY , cilt.81, sa.3, ss.139-150, 2010 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

25. Fracture resistance of tooth fragment reattachment: effects of different preparation techniques and adhesive materials

Pusman E., ÇEHRELİ Z. C., Altay N., ÜNVER B., SARAÇBAŞI O., Ozgun G.
DENTAL TRAUMATOLOGY , cilt.26, sa.1, ss.9-15, 2010 (SCI-Expanded, Scopus) identifier identifier identifier

26. Effect of acidulated phosphate fluoride and casein phosphopeptide-amorphous calcium phosphate application on shear bond strength of orthodontic brackets

Kecik D., Cehreli S. B., Sar C., ÜNVER B.
ANGLE ORTHODONTIST , cilt.78, sa.1, ss.129-133, 2008 (SCI-Expanded, Scopus) identifier identifier identifier

27. Modelling of strata movement with a special reference to caving mechanism in thick seam coal mining

Unver B., Yasitli N.
INTERNATIONAL JOURNAL OF COAL GEOLOGY , cilt.66, sa.4, ss.227-252, 2006 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

28. 3-D numerical modelling of stresses around a longwall panel with top coal caving

Yasitli N., Unver B.
JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY , cilt.105, sa.5, ss.287-300, 2005 (SCI-Expanded, Scopus) identifier identifier

29. 3D numerical modeling of longwall mining with top-coal caving

Yasitli N., Unver B.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.42, sa.2, ss.219-235, 2005 (SCI-Expanded, Scopus) identifier identifier

30. Characterization of rock joint surface degradation under shear loads

UNAL M., Unver B.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.41, sa.3, ss.380-381, 2004 (SCI-Expanded, Scopus) identifier identifier

31. Application of heat transfer analysis for frozen food storage caverns

Unver B., Agan C.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY , cilt.18, sa.1, ss.7-17, 2003 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier identifier

32. Effect of residual tectonic stresses on roadway stability in an underground coal mine

Unver B.
JOURNAL OF THE SOUTH AFRICAN INSTITUTE OF MINING AND METALLURGY , cilt.99, sa.3, ss.167-172, 1999 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

33. Assessment of the use of plastic water stemming cartridges in underground blasting operations

Unver B., Ozozen A.
TRANSACTIONS OF THE INSTITUTION OF MINING AND METALLURGY SECTION A-MINING INDUSTRY , cilt.107, 1998 (SCI-Expanded) Sürdürülebilir Kalkınma identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 15

1. Relationship between two consecutive slope failures at elbistan open cast mine and a new production method proposal

ÜNVER B., HİNDİSTAN M. A.
IMCET 2019 - Proceedings of the 26th International Mining Congress and Exhibition of Turkey, 16 - 19 Nisan 2019, ss.1208, (Tam Metin Bildiri) identifier

2. Madencilik Faaliyetleri İzleme ve Otomasyon Sistemi

TERCAN A. E., ÜNVER B., HİNDİSTAN M. A., URAL S., GAZEL S., HADİMOĞULLARI A.
Türkiye 25. Uluslararası Madencilik Kongresi ve Sergisi (IMCET 2017), 11 - 14 Nisan 2017, ss.325-330, (Tam Metin Bildiri)

3. Eynez Kömür Sahası Koşulları ve Gelecekte Güvenli Madencilik İçin Yapılması Gerekenler

ÜNVER B., HİNDİSTAN M. A.
Türkiye 25. Uluslararası Madencilik Kongresi ve Sergisi (IMCET 2017), 11 - 14 Nisan 2017, ss.408-416, (Tam Metin Bildiri)

4. Relationship between Two Consecutive Slope Failures at Elbistan Open Cast Mine

Unver B., Hindistan M. A.
16th International Symposium on Environmental Issues and Waste Management in Energy and Mineral Production (SWEMP) / International Symposium on Computer Applications (CAMI), İstanbul, Türkiye, 5 - 07 Ekim 2016, (Tam Metin Bildiri) identifier

5. Soma eynez kömür sahası için alternatif bir üretim yöntemi önerisi

ÜNVER B., HİNDİSTAN M. A., TERCAN A. E., ERTUNÇ G., ÜNAL M. S., KILLIOĞLU S. Y., et al.
Türkiye 24. uluslararası madencilik kongresi, 14 - 17 Nisan 2015, (Tam Metin Bildiri)

6. A New Production Method Proposal for Soma Eynez Coal Field

ÜNVER B., HİNDİSTAN M. A., TERCAN A. E., ERTUNÇ G., ÜNAL M. S., KILLIOĞLU S. Y., et al.
24th International Mining Congress and Exhibition of Turkey, 14 - 17 Nisan 2015, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

7. A Geostatistical Study of Tertiary Coal Fields in Turkey

ATALAY F., TERCAN A. E., ÜNVER B., HİNDİSTAN M. A., ERTUNÇ G.
15th Annual Conference of the International-Association-for-Mathematical-Geosciences (IAMG), Madrid, İspanya, 2 - 06 Eylül 2013, ss.723-726, (Tam Metin Bildiri) Sürdürülebilir Kalkınma identifier identifier

8. Estimation of coal quality variables by covariance matching constrained kriging Kömür kalite deǧişkenlerinin kovaryans eşlemeli krigleme yöntemi ile kestirimi

ERTUNÇ G., HİNDİSTAN M. A., TERCAN A. E., ÜNVER B.
23rd International Mining Congress and Exhibition of Turkey, IMCET 2013, Antalya, Türkiye, 16 - 19 Nisan 2013, cilt.3, ss.1785-1792, (Tam Metin Bildiri) identifier

9. Preliminary 3D numerical modeling of a hypothetical LNG storage cavern having an irregular geometry

Unver B., Hasanpour R., Chakeri H., HİNDİSTAN M. A.
European Rock Mechanics Symposium (EUROCK 2010), Lausanne, İsviçre, 15 - 18 Haziran 2010, ss.721-722, (Tam Metin Bildiri) identifier identifier

10. Numerical study of dimensions effects on measurement of rock fracture characterizations by using the modified Arcan test specimen

Hasanpour R., Choupani N., HİNDİSTAN M. A., Unver B.
European Rock Mechanics Symposium (EUROCK 2010), Lausanne, İsviçre, 15 - 18 Haziran 2010, ss.259-262, (Tam Metin Bildiri) identifier identifier

11. Numerical modelling of indenter/rock interaction under various indenter profiles

Tiryaki N., Williams D. J., Alehossein H., Unver B.
European Rock Mechanics Symposium (EUROCK 2010), Lausanne, İsviçre, 15 - 18 Haziran 2010, ss.413-416, (Tam Metin Bildiri) identifier identifier

12. An analysis of the effect of discontinuity surface matching on shear strength by image processing

Unal M., Unver B.
17th International Mining Congress and Exhibition of Turkey (IMCET 2001), Ankara, Türkiye, 19 - 22 Haziran 2001, ss.425-430, (Tam Metin Bildiri) identifier

13. A critical assessment of an exploration pilot tunnel in adverse geological conditions: A case study

Unver B., Aygar E.
9th International Symposium on Mine Planning and Equipment Selection, Athens, Yunanistan, 6 - 09 Kasım 2000, ss.397-402, (Tam Metin Bildiri) identifier

14. Modelling of discontinuity surface roughness by digital photogrammetry and geostatistical methods

Unal M., Unver B., Tercan E.
9th International Symposium on Mine Planning and Equipment Selection, Athens, Yunanistan, 6 - 09 Kasım 2000, ss.391-396, (Tam Metin Bildiri) identifier

15. A statistical method for practical assessment of sawability of rocks

Unver B.
ISRM International Symposium on Prediction and Performance in Rock Mechanics and Rock Engineering (EUROCK 96), Turin, İtalya, 2 - 05 Eylül 1996, ss.59-65, (Tam Metin Bildiri) identifier identifier
Metrikler

Yayın

48

Yayın (WoS)

41

Yayın (Scopus)

36

Atıf (WoS)

719

H-İndeks (WoS)

14

Atıf (Scopus)

671

H-İndeks (Scopus)

13

Proje

48

Tez Danışmanlığı

14
BM Sürdürülebilir Kalkınma Amaçları