Metrics
Publication
40
Open Access
14
UN Sustainable Development Goals
Education
1996 - 2001
1996 - 2001Doctorate
Dalhousie University, Faculty of Engineering, Department of Mechanical Engineering , Canada
1993 - 1996
1993 - 1996Postgraduate
Middle East Technical University, Faculty Of Engineering, Department Of Mechanical Engineering, Turkey
1989 - 1993
1989 - 1993Undergraduate
Middle East Technical University, Faculty Of Engineering, Department Of Mechanical Engineering, Turkey
Research Areas
Avesis Research Areas:
Mechanical Engineering, Fluid Mechanics, Advanced Energy Technologies, Thermodynamics, Heat and Mass Transfer
WoS Research Areas:
Engineering, Computing & Technology (ENG), ENGINEERING, ENGINEERING, MECHANICAL
Scopus Research Areas:
General Engineering, Automotive Engineering
Research Areas Based on Academic Activities
Avesis Research Areas
WoS Research Areas
Scopus Research Areas
Articles
All (34)
SCI-E, SSCI, AHCI (33)
SCI-E, SSCI, AHCI, ESCI (33)
Scopus (33)
TRDizin (1)
2025
20251. Coarse grained CFD-DEM simulation of the convective cooling during the discharge process in spouted bed solar receivers
ÖZDEMİR A. E., KÜLAH G., KÖKSAL M.
PARTICUOLOGY , vol.104, pp.88-102, 2025 (SCI-Expanded, Scopus)
2025
20252. Experimental investigation and numerical assessment of the electrical and thermal behaviors of Lithium-Ion batteries at low temperatures
TEKİN A., ÖZDEMİR T., EKİCİ Ö., KÖKSAL M.
APPLIED THERMAL ENGINEERING , vol.274, 2025 (SCI-Expanded, Scopus)
2025
20253. Experimental investigation of directly irradiated conical spouted bed thermal receivers
ÖZDEMİR A. E., Akici C., KÖKSAL M., KÜLAH G.
PARTICUOLOGY , vol.103, pp.18-28, 2025 (SCI-Expanded, Scopus)
2024
20244. Numerical and experimental investigation of the electrical and thermal behaviors of the Li-ion batteries under normal and abuse operating conditions
ÖZDEMİR T., EKİCİ Ö., KÖKSAL M.
Journal of Energy Storage , vol.77, 2024 (SCI-Expanded, Scopus)
2023
20235. Axial gas mixing in conical spouted beds with high density particles
Dogan N., KÖKSAL M., KÜLAH G.
Particuology , vol.81, pp.45-57, 2023 (SCI-Expanded, Scopus)
2021
20216. Experimental Assessment of the Lumped Lithium Ion Battery Model at Different Operating Conditions
ÖZDEMİR T., Amini A., EKİCİ Ö., KÖKSAL M.
HEAT TRANSFER ENGINEERING
, vol.43, no.3-5, pp.314-325, 2021 (SCI-Expanded, Scopus)
2021
20217. Gas velocity distribution in conical spouted beds with high-density particles
DOĞAN N., KÖKSAL M., KÜLAH G.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING , vol.99, no.7, pp.1607-1615, 2021 (SCI-Expanded, Scopus)
2021
20218. A thermal model for Li-ion batteries operating under dynamic conditions
Amini A., ÖZDEMİR T., EKİCİ Ö., BAŞLAMIŞLI S. Ç., KÖKSAL M.
APPLIED THERMAL ENGINEERING , vol.185, 2021 (SCI-Expanded, Scopus)
2020
20209. Experimental Study of the Performance of a Li-Ion Battery in a Highway Driving Cycle
Amini A., ÖZELCİ B., ÖZDEMİR T., EKİCİ Ö., BAŞLAMIŞLI S. Ç., KÖKSAL M.
Kocaeli Journal of Science and Engineering , vol.3, no.1, pp.1-8, 2020 (TRDizin)
2019
201910. Comment on "Deciphering conical spouted bed hydrodynamics using high intensity microphone"
Yaman O., KÖKSAL M., KÜLAH G.
NUCLEAR ENGINEERING AND DESIGN , vol.353, 2019 (SCI-Expanded, Scopus)
2019
201911. Process modeling of an automotive pem fuel cell system
Akroot A., EKİCİ Ö., KÖKSAL M.
INTERNATIONAL JOURNAL OF GREEN ENERGY , vol.16, no.10, pp.778-788, 2019 (SCI-Expanded, Scopus)
2019
201912. Detecting stability of conical spouted beds based on information entropy theory
Savari C., Sotudeh-Gharebagh R., KÜLAH G., KÖKSAL M., Mostoufi N.
POWDER TECHNOLOGY
, vol.343, pp.185-193, 2019 (SCI-Expanded, Scopus)
2019
201913. Surface-to-bed heat transfer for high-density particles in conical spouted and spout-fluid beds
Yaman O., KÜLAH G., KÖKSAL M.
PARTICUOLOGY , vol.42, pp.35-47, 2019 (SCI-Expanded, Scopus)
2018
201814. A new correlation for minimum spouting velocity for conical spouted beds operating with high density particles
Golshan S., Yaman O., KÖKSAL M., KÜLAH G., Zarghami R., Mostoufi N.
EXPERIMENTAL THERMAL AND FLUID SCIENCE , vol.96, pp.358-370, 2018 (SCI-Expanded, Scopus)
2017
201715. Monitoring of liquid sprayed conical spouted beds by recurrence plots
Savari C., KÜLAH G., KÖKSAL M., Sotudeh-Gharebagh R., Zarghami R., Mostoufi N.
POWDER TECHNOLOGY
, vol.316, pp.148-156, 2017 (SCI-Expanded, Scopus)
2017
201716. 3-D CFD modeling and experimental testing of thermal behavior of a Li-Ion battery
Gümüşsu E., EKİCİ Ö., KÖKSAL M.
APPLIED THERMAL ENGINEERING
, vol.120, pp.484-495, 2017 (SCI-Expanded, Scopus)
2016
201617. Early Detection of Agglomeration in Conical Spouted Beds Using Recurrence Plots
Savari C., KÜLAH G., Sotudeh-Gharebagh R., Mostoufi N., KÖKSAL M.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
, vol.55, no.26, pp.7179-7190, 2016 (SCI-Expanded, Scopus)
2016
201618. Investigation of the Predicting Ability of Single-Phase Chemical Equilibrium Modeling Applied to Circulating Fluidized Bed Coal Gasification
Kaya E., KÖKSAL M.
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME , vol.138, no.3, 2016 (SCI-Expanded, Scopus)
2016
201619. Particle Velocity, Solids Hold-Up, and Solids Flux Distributions in Conical Spouted Beds Operating with Heavy Particles
KÜLAH G., Sari S., KÖKSAL M.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH , vol.55, no.11, pp.3131-3138, 2016 (SCI-Expanded, Scopus)
2015
201520. CFD Simulations of Hydrodynamics of Conical Spouted Bed Nuclear Fuel Coaters
LULE S. S., Çolak Ü., KÖKSAL M., KÜLAH G.
CHEMICAL VAPOR DEPOSITION , vol.21, pp.122-132, 2015 (SCI-Expanded, Scopus)
2015
201521. Flow structure characterization in conical spouted beds using pressure fluctuation signals
Mostoufi N., KÜLAH G., KÖKSAL M.
POWDER TECHNOLOGY , vol.269, pp.392-400, 2015 (SCI-Expanded, Scopus)
2012
201222. Characterization of gas-solid flow in conical spouted beds operating with heavy particles
Sari S., KÜLAH G., KÖKSAL M.
EXPERIMENTAL THERMAL AND FLUID SCIENCE , vol.40, pp.132-139, 2012 (SCI-Expanded, Scopus)
2011
201123. Effects of operating and design parameters on the performance of a solid oxide fuel cell-gas turbine system
Suther T., Fung A. S., KÖKSAL M., Zabihian F.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH , vol.35, no.7, pp.616-632, 2011 (SCI-Expanded, Scopus)
2008
200824. Effect of staged air on heat transfer in circulating fluidized beds
KÖKSAL M., Golriz M. R., Hamdullahpur F.
APPLIED THERMAL ENGINEERING
, vol.28, pp.1008-1014, 2008 (SCI-Expanded, Scopus)
2007
200725. CFD simulation of gas-liquid contacting in tubular reactors
Podila K., Al Taweel A. M., KÖKSAL M., TROSHKO A., Gupta Y. P.
CHEMICAL ENGINEERING SCIENCE , vol.62, no.24, pp.7151-7162, 2007 (SCI-Expanded, Scopus)
2007
200726. Investigation of a novel perforation technique in petroleum wells - perforation by drilling
Rahman M. A., Mustafiz S., Biazar J., Koksal M., Islam M. R.
JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS , vol.344, no.5, pp.777-789, 2007 (SCI-Expanded, Scopus)
2007
200727. Quantifying the skin factor for estimating the completion efficiency of perforation tunnels in petroleum wells
RAHMAN M., Mustafiz S., Koksal M., Islam M. R.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING , vol.58, pp.99-110, 2007 (SCI-Expanded, Scopus)
2006
200628. Heat transfer in a pulsed bubbling fluidized bed
Zhang D., Koksal M.
POWDER TECHNOLOGY , vol.168, no.1, pp.21-31, 2006 (SCI-Expanded, Scopus)
2005
200529. A shift transformation for fully conservative methods: turbulence simulation on complex, unstructured grids
Hicken J., Ham F., Militzer J., Koksal M.
JOURNAL OF COMPUTATIONAL PHYSICS , vol.208, no.2, pp.704-734, 2005 (SCI-Expanded, Scopus)
2005
200530. CFD simulation of the gas-solid flow in the riser of a circulating fluidized bed with secondary air injection
Koksal M., HAMDULLAHPUR F.
CHEMICAL ENGINEERING COMMUNICATIONS , vol.192, no.9, pp.1151-1179, 2005 (SCI-Expanded, Scopus)
2005
200531. Thermal aspects of a circulating fluidized bed with air staging
Koksal M., Golriz M., Hamdullahpur F.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH , vol.29, no.10, pp.923-935, 2005 (SCI-Expanded, Scopus)
2004
200432. Gas mixing in circulating fluidized beds with secondary air injection
Koksal M., Hamdullahpur F.
CHEMICAL ENGINEERING RESEARCH & DESIGN , vol.82, pp.979-992, 2004 (SCI-Expanded, Scopus)
2004
200433. Circulating fluidized bed hydrodynamics with air staging: an experimental study
Ersoy L., Golriz M., Koksal M., Hamdullahpur F.
POWDER TECHNOLOGY , vol.145, no.1, pp.25-33, 2004 (SCI-Expanded, Scopus)
1998
199834. Bubble size control in a two-dimensional fluidized bed using a moving double plate distributor
Koksal M., Vural H.
POWDER TECHNOLOGY , vol.95, no.3, pp.205-213, 1998 (SCI-Expanded, Scopus)