Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Cracking of a functionally graded coating due to sliding contact with heat generation

BALCI M. N., DAĞ S., YILDIRIM B.
Fatigue and Fracture of Engineering Materials and Structures , cilt.46, sa.12, ss.4628-4648, 2023 (SCI-Expanded) identifier

On the beam-to-beam eccentric end plate connections: A numerical study

Eltaş S., Güler M. A., Tsavdaridis K. D., Sofias C. E., YILDIRIM B.
Thin-Walled Structures , cilt.188, 2023 (SCI-Expanded) identifier

Impact behavior of sandwich composites for aviation applications: A review

Karsandik Y., SABUNCUOĞLU B., YILDIRIM B., Silberschmidt V. V.
Composite Structures , cilt.314, 2023 (SCI-Expanded) identifier identifier

Simulation of Planar Mechanism Dynamics with Index-I Formulation and Projection Method Solution of Differential Algebraic Equations

Dogruer C. U., YILDIRIM B.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.47, sa.7, ss.9305-9317, 2022 (SCI-Expanded) identifier identifier

Investigation of stress distributions between a frictional rigid cylinder and laminated glass fiber composites

Yilmaz K. B., Sabuncuoglu B., Yildirim B.
ACTA MECHANICA , cilt.232, sa.11, ss.4379-4403, 2021 (SCI-Expanded) identifier identifier

A brief review on the mechanical behavior of nonwoven fabrics

YILMAZ K. B., SABUNCUOĞLU B., YILDIRIM B., Silberschmidt V. V.
JOURNAL OF ENGINEERED FIBERS AND FABRICS , cilt.15, 2020 (SCI-Expanded) identifier identifier

Numerical and empirical modeling of peak deceleration and stress analysis of polyurethane elastomer under impact loading test

Shamsadinlo B., Sheikhi M. R., ÜNVER Ö., YILDIRIM B.
POLYMER TESTING , cilt.89, 2020 (SCI-Expanded) identifier identifier

Frictional receding contact problem of a functionally graded layer resting on a homogeneous coated half-plane

ÇÖMEZ İ., El-Borgi S., YILDIRIM B.
ARCHIVE OF APPLIED MECHANICS , cilt.90, sa.9, ss.2113-2131, 2020 (SCI-Expanded) identifier identifier

Investigation of cold extrusion process by coupled thermo-mechanical finite element analysis

GÖRTAN M. O., TÜRKBAŞ O. S., YILMAZ K. B., YILDIRIM B.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.35, sa.1, ss.323-335, 2020 (SCI-Expanded) Creative Commons License identifier identifier

Double frictional receding contact problem for an orthotropic layer loaded by normal and tangential forces

YILDIRIM B., Yilmaz K. B., Comez I., Guler M. A.
MECCANICA , cilt.54, sa.14, ss.2183-2206, 2019 (SCI-Expanded) identifier identifier

Sliding frictional contact analysis of a monoclinic coating/isotropic substrate system

YILMAZ K. B., ÇÖMEZ İ., Guler M. A., YILDIRIM B.
MECHANICS OF MATERIALS , cilt.137, 2019 (SCI-Expanded) identifier identifier

On the plane frictional contact problem of a homogeneous orthotropic layer loaded by a rigid cylindrical stamp

ÇÖMEZ İ., YILMAZ K. B., Guler M. A., YILDIRIM B.
ARCHIVE OF APPLIED MECHANICS , cilt.89, sa.7, ss.1403-1419, 2019 (SCI-Expanded) identifier identifier

The effect of orthotropic material gradation on the plane sliding frictional contact mechanics problem

YILMAZ K. B., Comez L., Guler M. A., YILDIRIM B.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN , cilt.54, sa.4, ss.254-275, 2019 (SCI-Expanded) identifier identifier

Fabrication, Morphology Analysis, and Mechanical Properties of Ti Foams Manufactured Using the Space Holder Method for Bone Substitute Materials

Cetinel O., ESEN Z., YILDIRIM B.
METALS , cilt.9, sa.3, 2019 (SCI-Expanded) Creative Commons License identifier identifier

Analytical and finite element solution of the sliding frictional contact problem for a homogeneous orthotropic coating-isotropic substrate system

YILMAZ K. B., ÇÖMEZ İ., Guler M. A., YILDIRIM B.
ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK , cilt.99, sa.3, 2019 (SCI-Expanded) identifier identifier

Design of a vibration-free platform: Stabilization of a beam mounted on bicycle model of a car

DOĞRUER C. U., YILDIRIM B.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.232, sa.22, ss.4113-4127, 2018 (SCI-Expanded) identifier identifier

Frictional receding contact problem for a graded bilayer system indented by a rigid punch

YILMAZ K. B., ÇÖMEZ İ., YILDIRIM B., Guler M. A., EL-BORGİ S.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , cilt.141, ss.127-142, 2018 (SCI-Expanded) identifier identifier

Subsurface stresses in graded coatings subjected to frictional contact with heat generation

BALCI M. N., DAĞ S., YILDIRIM B.
JOURNAL OF THERMAL STRESSES , cilt.40, sa.4, ss.517-534, 2017 (SCI-Expanded) identifier identifier

On the analytical and finite element solution of plane contact problem of a rigid cylindrical punch sliding over a functionally graded orthotropic medium

Guler M. A., KÜÇÜKSUCU A., YILMAZ K. B., YILDIRIM B.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , cilt.120, ss.12-29, 2017 (SCI-Expanded) identifier identifier

Analysis of frictional contacts with heat generation considering temperature dependent properties

BALCI M. N., YILDIRIM B., DAĞ S.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , cilt.101, ss.59-69, 2015 (SCI-Expanded) identifier identifier

Computational Methods for Inclined Cracks in Orthotropic Functionally Graded Materials Under Thermal Stresses

SERKAN D., YILDIRIM B., TOPAL S.
Journal Of Thermal Stresses , cilt.36, ss.1001-1026, 2013 (SCI-Expanded) identifier

Frictional Hertzian contact between a laterally graded elastic medium and a rigid circular stamp

DAĞ S., Guler M. A., YILDIRIM B., Ozatag A. C.
ACTA MECHANICA , cilt.224, sa.8, ss.1773-1789, 2013 (SCI-Expanded) identifier identifier

Three dimensional computational analysis of fatigue crack propagation in functionally graded materials

Sabuncuoglu B., DAĞ S., YILDIRIM B.
COMPUTATIONAL MATERIALS SCIENCE , cilt.52, sa.1, ss.246-252, 2012 (SCI-Expanded) identifier identifier

HYGROTHERMAL FRACTURE ANALYSIS OF ORTHOTROPIC MATERIALS USING J(k)-INTEGRAL

DAĞ S., YILDIRIM B., Arslan O., Arman E. E.
JOURNAL OF THERMAL STRESSES , cilt.35, sa.7, ss.596-613, 2012 (SCI-Expanded) identifier identifier

Periodic crack problem for a functionally graded half-plane an analytic solution

YILDIRIM B., KUTLU O., Kadioglu S.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.48, sa.21, ss.3020-3031, 2011 (SCI-Expanded) identifier identifier

Computation of thermal fracture parameters for orthotropic functionally graded materials using J(k)-integral

DAĞ S., Arman E. E., YILDIRIM B.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.47, ss.3480-3488, 2010 (SCI-Expanded) identifier identifier

Sliding frictional contact between a rigid punch and a laterally graded elastic medium

DAG S., GULER M. A., YILDIRIM B., OZATAG A C.
International Journal Of Solids And Structures , cilt.46, ss.4038-4053, 2009 (SCI-Expanded) identifier

Buckling of an orthotropic graded coating with an embedded crack bonded to a homogeneous substrate

Aloulou W., YILDIRIM B., El-Borgi S., Zghal A.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.46, sa.9, ss.1890-1900, 2009 (SCI-Expanded) identifier identifier

Computation of Thermal Fracture Parameters for Inclined Cracks in Functionally Graded Materials Using Jk-Integral

DAĞ S., YILDIRIM B.
JOURNAL OF THERMAL STRESSES , cilt.32, sa.5, ss.530-556, 2009 (SCI-Expanded) identifier identifier

Delamination of compressively stressed orthotropic functionally graded material coatings under thermal loading

YILDIRIM B., Yilmaz S., Kadioglu S.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME , cilt.75, sa.5, 2008 (SCI-Expanded) identifier identifier

Performance analysis of TRISO coated fuel particles with kernel migration

Gulol O. O., Colak U., YILDIRIM B.
JOURNAL OF NUCLEAR MATERIALS , cilt.374, ss.168-177, 2008 (SCI-Expanded) identifier identifier

Mixed-mode fracture analysis of orthotropic functionally graded materials under mechanical and thermal loads

Dag S., Yildirim B., Sarikaya D.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.44, sa.24, ss.7816-7840, 2007 (SCI-Expanded) identifier identifier

An equivalent domain integral method for fracture analysis of functionally graded materials under thermal stresses

Yildirim B.
JOURNAL OF THERMAL STRESSES , cilt.29, sa.4, ss.371-397, 2006 (SCI-Expanded) identifier identifier

Three dimensional fracture analysis of FGM coatings under thermomechanical loading

Yildirim B., DAG S., ERDOGAN E.
INTERNATIONAL JOURNAL OF FRACTURE , cilt.132, sa.4, ss.369-395, 2005 (SCI-Expanded) identifier identifier

Residual stresses and distortion in boiler tube panels with welded overlay cladding

YILDIRIM B., Nied H.
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME , cilt.126, sa.4, ss.426-431, 2004 (SCI-Expanded) identifier identifier

Interface crack problems in graded orthotropic media: Analytical and computational approaches

DAG S., Yildirim B., ERDOGAN F.
INTERNATIONAL JOURNAL OF FRACTURE , cilt.130, sa.1, ss.471-496, 2004 (SCI-Expanded) identifier identifier

Edge crack problems in homogenous and functionally graded material thermal barrier coatings under uniform thermal loading

Yildirim B., ERDOGAN F.
JOURNAL OF THERMAL STRESSES , cilt.27, sa.4, ss.311-329, 2004 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Vibration based fatigue analysis of a structure integrated on an air vehicle by using experimental and theoretical methods

Akbaba O. M., YILDIRIM B., Canbaloglu G.
RESULTS IN ENGINEERING , cilt.15, 2022 (ESCI) identifier identifier

Free Vibration Analysis of a Functionally Graded Micro-Beam with Tapered Cross Section

İPCİ D., YILDIRIM B.
Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , 2021 (Hakemli Dergi) Creative Commons License

An Investigate of the Effect of Manufacturing Parameters on the Mechanical Properties of Thermoplastic Composites

ÇAKICI U. G., TÜRKBAŞ O. S., YILDIRIM B.
Gazi Mühendislik Bilimleri Dergisi , cilt.7, ss.233-242, 2021 (Hakemli Dergi) Creative Commons License identifier

Önceden Tasarlanmış Elektromobil Bir Aracın Çarpışma Analizi

YILDIRIM B., ÖZCAN Z., AKTAŞ E.
Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , cilt.8, sa.2, ss.345-371, 2020 (Hakemli Dergi)

Frictionless contact problem between a rigid moving punch and a homogeneous layer resting on a Winkler foundation

ÇÖMEZ İ., YILMAZ K. B., GÜLER M. A., YILDIRIM B.
Journal of Structural Engineering Applied Mechanics , cilt.2, ss.75-87, 2019 (Hakemli Dergi)

Jant İçi Elektrik Motorunun Kritik Parçalarının Yorulma Analizi

Çakıcı U. G., BAŞLAMIŞLI S. Ç., SOLMAZ S., YILMAZ K. B., YILDIRIM B.
Mühendis ve Makina , cilt.60, ss.132-146, 2019 (Hakemli Dergi)

Sonlu elemanlar yöntemi ile yorulma çatlağı ilerlemesi simülasyonu

SABUNCUOĞLU B., DAĞ S., YILDIRIM B.
Makina Tasarım ve İmalat , cilt.7, ss.87-95, 2005 (Hakemli Dergi)

Fonksiyonel Derecelendirilmiş Malzemeden Yapılmış Kenar Çatlaklı Bir Tabakada Isıl Şok Kırılmasının Sonlu Elemanlar Metodu İle İncelenmesi

YILDIRIM B.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.19, ss.235-245, 2004 (Scopus)

Arayüz Çatlaklarının Düğüm Noktası ile Zengileştirilmiş Sonlu Elemanlar İle Modellenmesi ve Dört Nokta Eğme Testi

YILDIRIM B., DAĞ S.
Makina Tasarım ve Imalat Dergisi , cilt.5, sa.2, 2003 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Switching Optimal Modal Control of Linear Time-Invariant Model of a Structural System

DOĞRUER C. U., YILDIRIM B.
2021 25th International Conference on System Theory, Control and Computing (ICSTCC), lasi, Romanya, 20 - 22 Ekim 2021 identifier identifier

Adaptive Control of Nonlinear Spur Gear Dynamicswith Parametric Disturbance Rejection

DOĞRUER C. U., YILMAZ K. B., YILDIRIM B.
2019 23rd International Conference on System Theory, Control and Computing (ICSTCC), Sinaia, Romanya, 9 - 11 Ekim 2019, ss.373-378

DAİRESEL ZIMBA İLE İZOTROP YARIM DÜZLEME BASTIRILAN ORTOTROP TABAKANIN SÜRTÜNMELİ TEMAS PROBLEMİ

YILMAZ K. B., ÇÖMEZ İ., GÜLER M. A., YILDIRIM B.
21. Ulusal Mekanik Kongresi, Niğde, Türkiye, 2 - 06 Eylül 2019, ss.687-696

FRICTIONAL CONTACT PROBLEM BETWEEN A FUNCTIONALLY GRADED ORTHOTROPIC LAYER AND A RIGID FLAT PUNCH

YILMAZ K. B., ÇÖMEZ İ., GÜLER M. A., YILDIRIM B.
International Civil Engineering Architecture Conference, Trabzon, Türkiye, 17 - 20 Nisan 2019

FRICTIONAL SLIDING CONTACT PROBLEM OF AN ORTHOTROPIC LAYER PRESSED BY A RIGID PARABOLIC PUNCH

YILMAZ K. B., ÇÖMEZ İ., GÜLER M. A., YILDIRIM B.
International Civil Engineering Architecture Conference, Trabzon, Türkiye, 17 - 20 Nisan 2019

KOMPOZİT SARGILI BASINÇLI KAPLARDA ÇATLAK ANALİZİ

çetin M., Yaman K., YILDIRIM B.
18th INTERNATIONAL CONFERENCE ONMACHINE DESIGN AND PRODUCTION, Eskişehir, Türkiye, 3 - 06 Temmuz 2018, ss.111-123

Numerical Investigation of Dynamics of Crach Box Collision Geometry

KUTLUAY E., YILDIRIM B., ÇETİNEL O.
OTEKON 2018, Bursa, Türkiye, 7 - 08 Mayıs 2018, ss.37-44

Derivation of crush force versus deformation behaviour of vehicles at different impact speeds

HİMMETOĞLU S., YILMAZ K. B., YILDIRIM B., TEKİN a.
22nd International Scientific on Conference Transport Means 2018, Trakai, Litvanya, 3 - 05 Ekim 2018, ss.49-56 identifier

Mixed-mode stress intensity factors in a homogeneous orthotropic medium loaded by a frictional sliding rigid flat stamp

YILMAZ K. B., Güler M., YILDIRIM B.
17th International Conference on Fracture and Damage Mechanics, FDM 2018, Bangkok, Tayland, 4 - 06 Eylül 2018, ss.179-184 identifier

Mesh Insensitive Structural Stress Method for Fatigue Analysis of Welded Joints Using the Finite Element Method

MÜLKOĞLU O., SEYEDİ A. R., GÜLER M. A., YILDIRIM B.
8th International Advanced Technologies Symposium 2017, IATS ‘17, Elazig,TURKEY, Elazığ, Türkiye, 19 - 22 Eylül 2017, ss.3729-3734

Three Dimensional Modeling of Inclined Surface Cracks in FGM Coatings

Kosker S., DAĞ S., YILDIRIM B.
10th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, Sendai, Japonya, 22 - 25 Eylül 2008, ss.109-110 identifier identifier

Fatigue crack growth analysis models for functionally graded materials

DAĞ S., Sabuncuoglu B., YILDIRIM B.
9th International Conference on Multiscale and Functionally Graded Materials, Hawaii, Amerika Birleşik Devletleri, 15 - 18 Ekim 2006, cilt.973, ss.423-424 identifier

Finite Element Modeling Of Overlay Welding Of Boiler Waterwall Panels

YILDIRIM B.
Cappadocia International Mechanical Engineering Symposium (CMES1-04), Kapodokya, Türkiye, 14 - 16 Temmuz 2004, ss.103-108

Interface Cracking of FGM Coatings Under Uniform Thermal Loading

YILDIRIM B., ERDOĞAN F.
The Eighth Japan-U.S. Conference on Composite Materials, Baltimore, Amerika Birleşik Devletleri, 24 - 25 Eylül 1998, ss.388-396

Application of the Mixed-mode Bending Fracture Test for Electronic Packaging Materials

YILDIRIM B., HYDRO R. M., NIED H. F.
SEM Spring Conference on Experimental Mechanics, Washington, Kiribati, 2 - 04 Haziran 1997, ss.21-22

Finite Element Modelling of the Mixed-mode Bending Fracture Test for Electronic Packaging Materials

YILDIRIM B., Nied H. F.
SEM Spring Conference on Experimental Mechanics, Washington, Kiribati, 2 - 04 Haziran 1997, ss.23-24

Metrikler

Yayın

64

Atıf (WoS)

585

H-İndeks (WoS)

14

Atıf (Scopus)

549

H-İndeks (Scopus)

12

Proje

23

Tez Danışmanlığı

42

Açık Erişim

4