Yayınlar & Eserler

Yayın Ağı
Makaleler 25
Tümü (25)
SCI-E, SSCI, AHCI (20)
SCI-E, SSCI, AHCI, ESCI (23)
ESCI (3)
Scopus (23)
TRDizin (2)

1. 3B Beton Baskılı CDW Bazlı Jeopolimer Cephe Panellerinin Dijital Üretimi, Teknik Detaylandırması, Yapısal Entegrasyonu ve Maliyeti

Takva Ç., ÖZ S. N., İLCAN H., İlerisoy Z. Y., Sahmaran M.
PLANARCH - Design and planning research (Online) , cilt.10, sa.2, ss.193-203, 2026 (TRDizin) Creative Commons License

2. Sustainable lightweight thermal insulating geopolymer mortars from end-of-life materials for 3D printing

Ekinci M. Ö., Belendir U., DEMİRAL N. Ç., ŞAHİN O., İLCAN H., ŞAHMARAN M., et al.
Construction and Building Materials , cilt.520, 2026 (SCI-Expanded, Scopus)

3. Circular economy approach to geopolymer development using construction and demolition waste

İLCAN H., Sahmaran M.
Journal of Construction Engineering, Management & Innovation (Online) , cilt.9, sa.1, ss.1-8, 2026 (ESCI, TRDizin) Creative Commons License

4. Diagonal tension testing of 3D printed concrete walls: Benchmarking against conventional masonry

MERCİMEK Ö., AKKAYA S. T., BIÇAKÇIOĞLU K., ÇELİK A., ÖZDOĞRU E., Yıldırım F. N., et al.
Journal of Building Engineering , cilt.121, 2026 (SCI-Expanded, Scopus)

5. Circular binder design using CDW and conventional precursors: Engineering and environmental performance assessment

İLCAN H., Koca E., Özçelikci E., Sevim Ö., ŞAHMARAN M., Lachemi M.
Environmental Research , cilt.289, 2026 (SCI-Expanded, Scopus)

6. The effectiveness of 3D concrete printing technology in architectural design: different corner-wall combinations in 3D printed elements and geometric form configurations in residential buildings

İLERİSOY Z. Y., TAKVA Ç., Top S. M., Gökgöz B. İ., Gebel Ş., İLCAN H., et al.
Architectural Science Review , cilt.69, sa.4, ss.460-476, 2026 (AHCI, Scopus)

7. Valorization of low-quality recycled concrete aggregates in cement-based systems through carbonation: assessment of engineering performance

Dundar B., SÖNMEZ TUĞLUCA M., İLCAN H., ŞAHİN O., ŞAHMARAN M.
JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.61, ss.1769-1784, 2025 (SCI-Expanded, Scopus)

8. Evaluating sustainable building strategies: Life cycle comparison of demountable and conventional built-environment structures

Khan S. A., İLCAN H., ŞAHİN O., Jassim M., Aminipour E., AKDUMAN Ş., et al.
CLEANER ENVIRONMENTAL SYSTEMS , cilt.18, 2025 (ESCI, Scopus)

9. Mechanochemical transformation of waste bricks: A study on grinding optimization and pozzolanic activity

SÖNMEZ TUĞLUCA M., Teksin E., Taj K., ŞAHİN O., İLCAN H., GÜLCAN E., et al.
POWDER TECHNOLOGY , cilt.460, 2025 (SCI-Expanded, Scopus)

10. Reinforcement and modular system for 3DCP geopolymer structures using construction and demolition waste

İLCAN H., Kulak A. Y., ŞAHİN O., ALDEMİR A., ŞAHMARAN M., Lachemi M.
CONSTRUCTION AND BUILDING MATERIALS , cilt.474, 2025 (SCI-Expanded, Scopus)

11. 3D-printable construction and demolition waste-based geopolymer: Investigating the effects of additives on engineering properties

İLCAN H., Külak A. Y., ŞAHMARAN M.
Journal of Building Engineering , cilt.87, 2024 (SCI-Expanded, Scopus)

12. Optimizing mechanical performance of geopolymers produced from construction and demolition waste: A comparative study of materials from different origins

KUL A., Ozcelikci E., ÖZEL B. F., İLCAN H., ŞAHİN O., Gunal M. F., et al.
Construction and Building Materials , cilt.426, 2024 (SCI-Expanded, Scopus)

13. Comprehensive investigation of performance of construction and demolition waste based wood fiber reinforced geopolymer composites

Ozcelikci E., ÖZDOĞRU E., Tugluca M., İLCAN H., ŞAHMARAN M.
Journal of Building Engineering , cilt.84, 2024 (SCI-Expanded, Scopus)

14. Interlayer mechanical performance of 3D-printed cementitious systems: A comprehensive study on operational and material parameters

İLCAN H., Özkılıç H., Tuğluca M., ŞAHMARAN M.
Construction and Building Materials , cilt.419, 2024 (SCI-Expanded, Scopus)

15. The impact of nozzle diameter and printing speed on geopolymer-based 3D-Printed concrete structures: Numerical modeling and experimental validation

Khan S. A., İLCAN H., Imran R., Aminipour E., ŞAHİN O., Al Rashid A., et al.
Results in Engineering , cilt.21, 2024 (ESCI, Scopus)

16. Low-alkaline activated construction and demolition waste-based geopolymers

İLCAN H., Demirbaş A. O., ULUGÖL H., ŞAHMARAN M.
Construction and Building Materials , cilt.411, 2024 (SCI-Expanded, Scopus)

17. Buildability analysis on effect of structural design in 3D concrete printing (3DCP): An experimental and numerical study

Khan S. A., İLCAN H., Aminipour E., ŞAHİN O., Al Rashid A., ŞAHMARAN M., et al.
Case Studies in Construction Materials , cilt.19, 2023 (SCI-Expanded, Scopus)

18. Effect of duration and type of grinding on the particle size distribution and microstructure of natural pumice with low pozzolanic reactivity

Taj K., İLCAN H., Teksin E., Argın G., Ardoğa M. K., UZAL B., et al.
Powder Technology , cilt.428, 2023 (SCI-Expanded, Scopus)

19. Effect of industrial waste-based precursors on the fresh, hardened and environmental performance of construction and demolition wastes-based geopolymers

İLCAN H., ŞAHİN O., Unsal Z., Ozcelikci E., KUL A., Cağatay Demiral N., et al.
Construction and Building Materials , cilt.394, 2023 (SCI-Expanded, Scopus)

20. The effects of various operational- and materials-oriented parameters on the carbonation performance of low-quality recycled concrete aggregate

Dündar B., Tuğluca M., İLCAN H., ŞAHİN O., ŞAHMARAN M.
Journal of Building Engineering , cilt.68, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

21. Characterization of chemically treated waste wood fiber and its potential application in cementitious composites

Tuğluca M., ÖZDOĞRU E., İLCAN H., Özçelikci E., ULUGÖL H., ŞAHMARAN M.
Cement and Concrete Composites , cilt.137, 2023 (SCI-Expanded, Scopus)

22. Rheological property and extrudability performance assessment of construction and demolition waste-based geopolymer mortars with varied testing protocols

İLCAN H., ŞAHİN O., KUL A., Ozcelikci E., ŞAHMARAN M.
Cement and Concrete Composites , cilt.136, 2023 (SCI-Expanded, Scopus)

23. Mechanical anisotropy evaluation and bonding properties of 3D-printable construction and demolition waste-based geopolymer mortars

Demiral N. C., Ekinci M. O., ŞAHİN O., İLCAN H., KUL A., YILDIRIM G., et al.
CEMENT & CONCRETE COMPOSITES , cilt.134, 2022 (SCI-Expanded, Scopus)

24. Rheological properties and compressive strength of construction and demolition waste-based geopolymer mortars for 3D-Printing

İLCAN H., Sahin O., KUL A., YILDIRIM G., ŞAHMARAN M.
CONSTRUCTION AND BUILDING MATERIALS , cilt.328, 2022 (SCI-Expanded, Scopus)

25. Conceptual design of autonomous rapid printing system for emergency and humanitarian needs

Koç M., Khan S. A., İLCAN H., ŞAHMARAN M.
Materials Today: Proceedings , cilt.70, ss.1-5, 2022 (Scopus) Sürdürülebilir Kalkınma
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 2

1. Alkali-Treated Waste Wood Fiber Reinforcement for Geopolymer Composites: A Sustainable Approach for Waste Management

SÖNMEZ TUĞLUCA M., ŞAHMARAN M., İLCAN H.
The 3rd Internatıonal Cıvıl Engıneerıng & Archıtecture Conference, Trabzon, Türkiye, 12 - 14 Ekim 2023, ss.788-798, (Tam Metin Bildiri)

2. Effects of treated waste wood fibers incorporation on rheological properties of the construction and demolition waste-based geopolymer mortar

İLCAN H., SÖNMEZ TUĞLUCA M., ŞAHİN O., ŞAHMARAN M.
4th International Congress on Materials & Structural Stability, Rabat, Malta, 6 - 10 Ekim 2023, ss.95, (Tam Metin Bildiri)
Metrikler

Yayın

28

Yayın (WoS)

24

Yayın (Scopus)

24

Atıf (WoS)

446

H-İndeks (WoS)

13

Atıf (Scopus)

663

H-İndeks (Scopus)

15

Atıf (Scholar)

900

H-İndeks (Scholar)

15

Açık Erişim

2
BM Sürdürülebilir Kalkınma Amaçları
SDG 6: AMAÇ 6: TEMİZ SU VE SIHHİ KOŞULLAR
SDG 7: AMAÇ 7: ERİŞİLEBİLİR VE TEMİZ ENERJİ
SDG 12: AMAÇ 12: SORUMLU ÜRETİM VE TÜKETİM
SDG 13: AMAÇ 13: İKLİM EYLEMİ
SDG 15: AMAÇ 15: KARASAL YAŞAM