Prof. Dr. ŞENER KARABULUT

Yayın Ağı

Makaleler 40

1. Microstructure-guided selection of nanofluid-assisted MQL strategies for machinability of WAAM-fabricated stainless steel–inconel bimetallic structures

OZANER O. C., ÇAVUŞ Y., KARAKOÇ H., KARABULUT Ş., Talemi R., Tjahjowidodo T., et al.

Progress in Additive Manufacturing , ss.1-15, 2025 (ESCI, Scopus)

2. Influence of nanofluids on the tribological performance, tool wear, and surface roughness of LPBF and forged IN718 alloys

KARAKOÇ H., KARABULUT Ş., Ozaner O. C.

WEAR , 2025 (SCI-Expanded, Scopus)

3. Influence of Deposition Sequence and Thermal Cycles on the Microstructure and Wear Behavior of WAAM-Fabricated SS309L and Inconel 625 Bimetallic Structures

Ozaner O. C., KARABULUT Ş., KARAKOÇ H., Sharma A., Talemi R., Tjahjowidodo T.

METALS AND MATERIALS INTERNATIONAL , 2025 (SCI-Expanded, Scopus)

4. Enhancing Wear Resistance and Mechanical Behaviors of AA7020 Alloys Using Hybrid Fe3O4-GNP Reinforcement

Taşcı U., Yılmaz T. A., Karakoç H., Karabulut Ş.

Lubricants , cilt.12, sa.6, ss.1-24, 2024 (SCI-Expanded, Scopus)

5. Study on the wear characteristics of INCO939 alloy manufactured by laser powder bed fusion and casting.

KARABULUT Ş., KARAKOÇ H., BİLGİN M., Subaşı L., Dursun G., Ozaner O. C.

Tribology International , cilt.194, 2024 (SCI-Expanded, Scopus)

6. Overcoming machining challenges in hybrid laser metal deposition of IN718 with heat-assisted minimum quantity lubrication

Kapil A., Ozaner O. C., Sato Y., Hayashi Y., Ikeda K., Suga T., et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.132, sa.11-12, ss.5407-5424, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

7. Effect of lapping process on axis misalignment and surface roughness in elliptical gear pairs

Pazarkaya İ., YAZAR M., KARABULUT Ş., UZUN G., ÖZDEMİR A.

Journal of Manufacturing Processes , cilt.115, ss.192-201, 2024 (SCI-Expanded, Scopus)

8. An experimental investigation on machining-induced surface/subsurface characteristics of nickel based Inc-718 alloy: A novel hybrid approach in milling process

Bilgin M., Karabulut Ş., Karakoç H., Kayır Y., Sarıkaya M.

Tribology International , cilt.191, 2024 (SCI-Expanded, Scopus)

9. Study on the friction drilling behaviors and tribological properties of aluminum matrix composites

KARAKOÇ H., BİLGİN M., KARABULUT Ş.

Materials Today Communications , cilt.38, 2024 (SCI-Expanded, Scopus)

10. Dry and Minimum Quantity Lubrication Machining of Additively Manufactured IN718 Produced via Laser Metal Deposition

Ozaner O. C., Kapil A., Sato Y., Hayashi Y., Ikeda K., Suga T., et al.

Lubricants , cilt.11, sa.12, 2023 (SCI-Expanded, Scopus)

11. A comparative study on mechanical and ballistic performance of functionally graded Al6061 composites reinforced with B4C, SiC, and Al2O3

KARABULUT Ş., KARAKOÇ H., BİLGİN M., Canpolat H., Krolczyk G. M., Sarıkaya M.

Journal of Materials Research and Technology , cilt.23, ss.5050-5065, 2023 (SCI-Expanded, Scopus)

12. A study on the influence of thermally assisted novel hybrid methods on the drilling behavior of Ti6Al4V alloy

KARABULUT Ş., BİLGİN M., KARAKOÇ H., Khanna N., Sarikaya M.

TRIBOLOGY INTERNATIONAL , cilt.175, 2022 (SCI-Expanded, Scopus)

13. Resource savings by sustainability assessment and energy modelling methods in mechanical machining process: A critical review

Sarikaya M., Gupta M. K., Tomaz I., Krolczyk G. M., Khanna N., Karabulut Ş., et al.

JOURNAL OF CLEANER PRODUCTION , cilt.370, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

14. Study of the Heat-Assisted Milling of Ti-6Al-4V Under Dry and Minimum-Quantity-Lubrication

KARABULUT Ş., BİLGİN M., KARAKOÇ H., Skondras Giousios D., Markopoulos A. P.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.47, sa.7, ss.9287-9304, 2022 (SCI-Expanded)

15. Study of the surface integrity and mechanical properties of turbine blade fir trees manufactured in Inconel 939 using laser powder bed fusion

Ozaner O. C., KARABULUT Ş., İZCİLER M.

JOURNAL OF MANUFACTURING PROCESSES , cilt.79, ss.47-59, 2022 (SCI-Expanded, Scopus)

16. TÜRKİYE'DE METAL SEKTÖRÜNDE ÇALIŞAN SAĞIRLAR VE İŞİTME ENGELLİLERE İLİŞKİN BİR DURUM ANALİZİ

KALKAN Ö. K., KARABULUT Ş.

Sosyal Politika Çalışmaları Dergisi , cilt.21, sa.53, ss.941-962, 2021 (TRDizin)

17. Effect of Virtual Reality-Based Training on Complex Industrial Assembly Task Performance

KALKAN Ö. K., KARABULUT Ş., Hoke G.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.46, sa.12, ss.12697-12708, 2021 (SCI-Expanded, Scopus)

18. Friction drilling of AA7075-T6 and AZ31B alloys under dry and oil containing ceramic particulates

KARABULUT Ş., BİLGİN M.

JOURNAL OF MANUFACTURING PROCESSES , cilt.65, ss.70-79, 2021 (SCI-Expanded, Scopus)

19. A review of the chip breaking methods for continuous chips in turning

Yilmaz B., KARABULUT Ş., Gullu A.

JOURNAL OF MANUFACTURING PROCESSES , cilt.49, ss.50-69, 2020 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

20. Investigation of Heat-Assisted Dissimilar Friction Stir Welding of AA7075-T6 Aluminum and AZ31B Magnesium Alloys

BİLGİN M., KARABULUT Ş., Ozdemir A.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , 2019 (SCI-Expanded, Scopus)

21. Study on mechanical and ballistic performances of boron carbide reinforced Al 6061 aluminum alloy produced by powder metallurgy

KARAKOÇ H., KARABULUT Ş., Citak R.

COMPOSITES PART B-ENGINEERING , cilt.148, ss.68-80, 2018 (SCI-Expanded, Scopus)

22. Performance analysis of new external chip breaker for efficient machining of Inconel 718 and optimization of the cutting parameters

Yilmaz B., Karabulut Ş., Gullu A.

JOURNAL OF MANUFACTURING PROCESSES , cilt.32, ss.553-563, 2018 (SCI-Expanded, Scopus)

23. Optimization of Machining Conditions for Surface Quality in Milling AA7039-Based Metal Matrix Composites

KARABULUT Ş., Gokmen U., Cinici H.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.43, sa.3, ss.1071-1082, 2018 (SCI-Expanded, Scopus)

24. EFFECTS OF CONTROL FACTORS ON OPERATING TEMPERATURES OF A MECHANICAL HEAT PUMP IN WASTE HEAT RECOVERY: Evaluation Using the Taguchi Method

MOTORCU A. R., Coskun S., KARABULUT Ş.

THERMAL SCIENCE , cilt.22, sa.1, ss.205-222, 2018 (SCI-Expanded, Scopus)

25. Alüminyum Magnezyum Alaşımlarının Sürtünme Karıştırma Kaynağı İle Kaynak Edilebilirliğinin Değerlendirilmesi

BİLGİN M., KARABULUT Ş., ÖZDEMİR A.

Gazi Üniversitesi Fen Bilimleri Dergisi Part: C Tasarım ve Teknoloji , cilt.5, ss.191-209, 2017 (TRDizin)

26. Investigation of surface roughness in the milling of Al7075 and open-cell SiC foam composite and optimization of machining parameters

KARABULUT Ş., KARAKOÇ H.

NEURAL COMPUTING & APPLICATIONS , cilt.28, sa.2, ss.313-327, 2017 (SCI-Expanded, Scopus)

27. Influence of B4C particle reinforcement on mechanical and machining properties of Al6061/B4C composites

KARABULUT Ş., KARAKOÇ H., Citak R.

COMPOSITES PART B-ENGINEERING , cilt.101, ss.87-98, 2016 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

28. Study on Machining Parameters for Thrust Force and Torque in Milling AA7039 Composites Reinforced with Al2O3/B4C/SiC Particles

KARABULUT Ş.

International Journal of Engineering Technologies, IJET , cilt.2, sa.2, ss.68-75, 2016 (Hakemli Dergi)

29. Study on the mechanical and drilling properties of AA7039 composites reinforced with Al2O/B4C/SiC particles

KARABULUT Ş., Gokmen U., Cinici H.

COMPOSITES PART B-ENGINEERING , cilt.93, ss.43-55, 2016 (SCI-Expanded, Scopus)

30. Experimental Investigation and Optimization of Cutting Force and Tool Wear in Milling Al7075 and Open-Cell SiC Foam Composite

KARABULUT Ş., Cinici H., KARAKOÇ H.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.41, sa.5, ss.1797-1812, 2016 (SCI-Expanded, Scopus)

31. Experimental Investigation of B4C Particulate Reinforced Aluminium 6061 Based Composite Material in Wire Cut EDM

KARABULUT Ş., GÖKMEN U., KARAKOÇ H., KALKAN Ö. K., ÇITAK R.

Metallofizika I Noveishie Tekhnologii , cilt.37, ss.1239-1251, 2015 (Scopus)

32. Optimization of surface roughness and cutting force during AA7039/Al2O3 metal matrix composites milling using neural networks and Taguchi method

Karabulut S.

MEASUREMENT , cilt.66, ss.139-149, 2015 (SCI-Expanded, Scopus)

33. Influence of lead angle variation on the coated carbide inserts wear when milling CGI and modeling by artificial neural networks and regression analysis method

Karabulut S., Güllü A.

Solid State Phenomena , ss.595-602, 2015 (Scopus)

34. Farklı Yanaşma Açıları İle Vermiküler Grafitli Dökme Demirin Frezelenmesinde Kesme Kuvvetlerinin Araştırılması Ve Analitik Modellenmesi

KARABULUT Ş., GÜLLÜ A.

Journal Of The Faculty Of Engineering And Architecture Of Gazi University , cilt.28, ss.135-143, 2013 (SCI-Expanded, Scopus, TRDizin)

35. AN INVESTIGATION OF CUTTING FORCES AND ANALYTICAL MODELLING IN MILLING COMPACTED GRAPHITE IRON WITH DIFFERENT LEAD ANGLES

Karabulut S., Gullu A.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.28, sa.1, ss.135-143, 2013 (SCI-Expanded, Scopus, TRDizin)

36. Wear model in milling compacted graphite iron with different lead angle using ceramic cutting tools

Karabulut Ş., Güllü A.

Solid State Phenomena , cilt.199, ss.371-376, 2013 (Scopus)

37. Dynamic chip breaker design for nickel-base, Inconel 718, alloy with coated carbide tools using negative angle tool holder

Karabulut Ş., Gullu A.

Solid State Phenomena , ss.758-763, 2009 (Scopus)

38. CHIP BREAKING PROBLEMS IN MACHINING OF INCONEL 718 SUPER ALLOY AND CHIP BREAKER DESIGN

Gullu A., Karabulut S., Guldas A.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.23, sa.1, ss.157-164, 2008 (SCI-Expanded, Scopus, TRDizin)

39. Dynamic Chip Breaker Design for Inconel 718 Using Positive Angle Tool Holder

Gullu A., Karabulut S.

MATERIALS AND MANUFACTURING PROCESSES , cilt.23, sa.8, ss.852-857, 2008 (SCI-Expanded, Scopus)

40. AA7075-T6 ve AZ31B Alaşımlarının Sürtünme Karıştırma Kaynağı Üzerinde Ön Isıtma ve Kuru Buz Soğutmasının Etkisi

BİLGİN M., KARABULUT Ş., ÖZDEMİR A.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , 1900 (ESCI, TRDizin)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 23

1. Sanal gerçeklik ile yalın üretim uygulamaları

BİLGİN M., KARABULUT Ş.

5 th International Conference on Data Science and Applications 2022 (ICONDATA'22), Muğla, Türkiye, 7 - 11 Eylül 2022, cilt.1, ss.154-160, (Tam Metin Bildiri)

2. Affecting Factors of Efficiency in Photovoltaic Energy Systems and Productivity-Enhancing Suggestions

AY İ., KADEMLİ M., KARABULUT Ş., Savas S.

2022 Innovations in Intelligent Systems and Applications Conference, ASYU 2022, Antalya, Türkiye, 7 - 09 Eylül 2022, (Tam Metin Bildiri)

3. Sürtünme Karıştırma Kaynağı ile Birleştirilmiş AA7075 ve AZ31B Alaşımlarının Kaynak Kalitesi Üzerine Çalışma

BİLGİN M., KARABULUT Ş., ÖZDEMİR A.

7th International Symposium on Innovative Technologies inEngineering and Science 2019 (ISITES2019), Şanlıurfa, Türkiye, 22 - 24 Kasım 2019, cilt.2, ss.1058-1066, (Tam Metin Bildiri)

4. EXPERIMENTAL STUDY ON WELDING FORCES AND TEMPERATURE DURING THE DISSIMILARFRICTION STIR WELDING OF AA7075 AND AZ31B ALLOYS

BİLGİN M., KARABULUT Ş., ÖZDEMİR A.

The International Conference on Material Science and Technology (IMSTEC 2019), Kızılcahamam/ANKARA(, Türkiye, 18 - 20 Ekim 2019, ss.705-710, (Tam Metin Bildiri)

5. Study on the Mechanical Properties of Dissimilar Friction Stir Welding of AA 7075 T6 and AZ31B Alloys

BİLGİN M., KARABULUT Ş., Özdemir A.

9th International Conference on Mechanical and Aerospace Engineering, ICMAE 2018, Budapest, Macaristan, 10 - 13 Temmuz 2018, ss.467-471, (Tam Metin Bildiri)

6. Study on the Wire Electrical Discharge Machining of AA 7075 Aluminum Alloy

KARABULUT Ş., KÖKÇAN R., BİLGİN M., Özdemir A.

9th International Conference on Mechanical and Aerospace Engineering, ICMAE 2018, Budapest, Macaristan, 10 - 13 Temmuz 2018, ss.584-588, (Tam Metin Bildiri)

7. The Effect Of The Process Parameters On The Axial Force and Traverse Force In The Friction Stir Welding Of Al 7075 T6 and AZ91D

BİLGİN M., KARABULUT Ş., ÖZDEMİR A., KAYIR Y.

III International Conference on Engineering and Natural Sciences, Budapest, Macaristan, 3 - 07 Mayıs 2017, (Tam Metin Bildiri)

8. A Novel Breaker Kit Design for Continuous Chip Breaking in Turning Operations

YILMAZ B., KARABULUT Ş., GÜLLÜ A.

ICENS International Conference on Engineering and Natural Science, 3 - 07 Mayıs 2017, (Tam Metin Bildiri)

9. Investigation of Cutting Force and Temperature Effect of Chip Breaker Used During Turning of Inconel 718 Material

YILMAZ B., KARABULUT Ş., GÜLLÜ A.

ICENS International Conference on Engineering and Natural Science, 03 Mayıs 2017, (Tam Metin Bildiri)

10. The effect of material pairs on the axial force, traverse force and temperature ın the friction stir welding process

BİLGİN M., KARABULUT Ş., ÖZDEMİR A.

3rd International Conference on Engineering and Natural Sciences (ICENS 2017), Budapest, Macaristan, 3 - 07 Mayıs 2017, ss.812-818, (Tam Metin Bildiri)

11. The Effect Of Material Pairs On The Axial Force, Traverse Force And Temperature In The Friction Stir Welding Process

BİLGİN M., KARABULUT Ş., ÖZDEMİR A.

III INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES (ICENS), Budapest, Macaristan, 3 Mayıs - 07 Aralık 2017, (Tam Metin Bildiri)

12. METEB meslek yüksekokulu öğrencilerinin iş sağlığı ve güvenliğine ilişkin görüşleri: Hacettepe ASO 1. OSB MYO örneği

KALKAN Ö. K., KARABULUT Ş.

EĞİTİM ARAŞTIRMALARI BİRLİĞİ9. ULUSLARARASI EĞİTİM ARAŞTIRMALARI KONGRESİ, Ordu, Türkiye, 11 - 17 Mayıs 2017, ss.605-606, (Özet Bildiri)

13. Study on spindle vibration and surface finish in turning of al 7075

Şahinoğlu A., KARABULUT Ş., Güllü A.

9th International Congress on Precision Machining, ICPM 2017, Athens, Yunanistan, 6 - 09 Eylül 2017, ss.321-327, (Tam Metin Bildiri)

14. Fabrication of AA6061/B4C Composites and Investigation of Ballistic Performances

KARAKOÇ H., Cinici H., KARABULUT Ş., Citak R.

8th International Conference on Mechanical and Aerospace Engineering (ICMAE), Prague, Çek Cumhuriyeti, 22 - 25 Temmuz 2017, ss.822-825, (Tam Metin Bildiri)

15. Effect of the B4C Reinforcement Ratio on Surface Roughness of Al6061 Based Metal Matrix Composite in Wire-EDM Machining

KARABULUT Ş., KARAKOÇ H., Citak R.

8th International Conference on Mechanical and Aerospace Engineering (ICMAE), Prague, Çek Cumhuriyeti, 22 - 25 Temmuz 2017, ss.812-815, (Tam Metin Bildiri)