Publications & Works

Publication Network

Published journal articles indexed by SCI, SSCI, and AHCI

Overcoming machining challenges in hybrid laser metal deposition of IN718 with heat-assisted minimum quantity lubrication

Kapil A., Ozaner O. C., Sato Y., Hayashi Y., Ikeda K., Suga T., et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , no.11-12, pp.5407-5424, 2024 (SCI-Expanded) Sustainable Development identifier

Enhancing Wear Resistance and Mechanical Behaviors of AA7020 Alloys Using Hybrid Fe3O4-GNP Reinforcement

Taşcı U., Yılmaz T. A., Karakoç H., Karabulut Ş.
Lubricants , vol.12, no.6, pp.1-24, 2024 (SCI-Expanded)

Study on the wear characteristics of INCO939 alloy manufactured by laser powder bed fusion and casting.

KARABULUT Ş., KARAKOÇ H., BİLGİN M., Subaşı L., Dursun G., Ozaner O. C.
Tribology International , vol.194, 2024 (SCI-Expanded) identifier

Effect of lapping process on axis misalignment and surface roughness in elliptical gear pairs

Pazarkaya İ., YAZAR M., KARABULUT Ş., UZUN G., ÖZDEMİR A.
Journal of Manufacturing Processes , vol.115, pp.192-201, 2024 (SCI-Expanded) identifier

Study on the friction drilling behaviors and tribological properties of aluminum matrix composites

KARAKOÇ H., BİLGİN M., KARABULUT Ş.
Materials Today Communications , vol.38, 2024 (SCI-Expanded) identifier

An experimental investigation on machining-induced surface/subsurface characteristics of nickel based Inc-718 alloy: A novel hybrid approach in milling process

Bilgin M., Karabulut Ş., Karakoç H., Kayır Y., Sarıkaya M.
Tribology International , vol.191, 2024 (SCI-Expanded) identifier

Dry and Minimum Quantity Lubrication Machining of Additively Manufactured IN718 Produced via Laser Metal Deposition

Ozaner O. C., Kapil A., Sato Y., Hayashi Y., Ikeda K., Suga T., et al.
Lubricants , vol.11, no.12, 2023 (SCI-Expanded) identifier

A comparative study on mechanical and ballistic performance of functionally graded Al6061 composites reinforced with B4C, SiC, and Al2O3

KARABULUT Ş., KARAKOÇ H., BİLGİN M., Canpolat H., Krolczyk G. M., Sarıkaya M.
Journal of Materials Research and Technology , vol.23, pp.5050-5065, 2023 (SCI-Expanded) identifier identifier

A study on the influence of thermally assisted novel hybrid methods on the drilling behavior of Ti6Al4V alloy

KARABULUT Ş., BİLGİN M., KARAKOÇ H., Khanna N., Sarikaya M.
TRIBOLOGY INTERNATIONAL , vol.175, 2022 (SCI-Expanded) identifier identifier

Resource savings by sustainability assessment and energy modelling methods in mechanical machining process: A critical review

Sarikaya M., Gupta M. K., Tomaz I., Krolczyk G. M., Khanna N., Karabulut Ş., et al.
JOURNAL OF CLEANER PRODUCTION , vol.370, 2022 (SCI-Expanded) Sustainable Development identifier identifier

Study of the Heat-Assisted Milling of Ti-6Al-4V Under Dry and Minimum-Quantity-Lubrication

KARABULUT Ş., BİLGİN M., KARAKOÇ H., Skondras Giousios D., Markopoulos A. P.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , vol.47, no.7, pp.9287-9304, 2022 (SCI-Expanded) identifier identifier

Study of the surface integrity and mechanical properties of turbine blade fir trees manufactured in Inconel 939 using laser powder bed fusion

Ozaner O. C., KARABULUT Ş., İZCİLER M.
JOURNAL OF MANUFACTURING PROCESSES , vol.79, pp.47-59, 2022 (SCI-Expanded) identifier identifier

Effect of Virtual Reality-Based Training on Complex Industrial Assembly Task Performance

KALKAN Ö. K., KARABULUT Ş., Hoke G.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , vol.46, no.12, pp.12697-12708, 2021 (SCI-Expanded) identifier identifier

Friction drilling of AA7075-T6 and AZ31B alloys under dry and oil containing ceramic particulates

KARABULUT Ş., BİLGİN M.
JOURNAL OF MANUFACTURING PROCESSES , vol.65, pp.70-79, 2021 (SCI-Expanded) identifier identifier

A review of the chip breaking methods for continuous chips in turning

Yilmaz B., KARABULUT Ş., Gullu A.
JOURNAL OF MANUFACTURING PROCESSES , vol.49, pp.50-69, 2020 (SCI-Expanded) Sustainable Development identifier identifier

Investigation of Heat-Assisted Dissimilar Friction Stir Welding of AA7075-T6 Aluminum and AZ31B Magnesium Alloys

BİLGİN M., KARABULUT Ş., Ozdemir A.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , 2019 (SCI-Expanded) identifier identifier

Study on mechanical and ballistic performances of boron carbide reinforced Al 6061 aluminum alloy produced by powder metallurgy

KARAKOÇ H., KARABULUT Ş., Citak R.
COMPOSITES PART B-ENGINEERING , vol.148, pp.68-80, 2018 (SCI-Expanded) identifier identifier

Performance analysis of new external chip breaker for efficient machining of Inconel 718 and optimization of the cutting parameters

Yilmaz B., Karabulut Ş., Gullu A.
JOURNAL OF MANUFACTURING PROCESSES , vol.32, pp.553-563, 2018 (SCI-Expanded) identifier identifier

Optimization of Machining Conditions for Surface Quality in Milling AA7039-Based Metal Matrix Composites

KARABULUT Ş., Gokmen U., Cinici H.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , vol.43, no.3, pp.1071-1082, 2018 (SCI-Expanded) identifier identifier

EFFECTS OF CONTROL FACTORS ON OPERATING TEMPERATURES OF A MECHANICAL HEAT PUMP IN WASTE HEAT RECOVERY: Evaluation Using the Taguchi Method

MOTORCU A. R., Coskun S., KARABULUT Ş.
THERMAL SCIENCE , vol.22, no.1, pp.205-222, 2018 (SCI-Expanded) Creative Commons License identifier identifier

Investigation of surface roughness in the milling of Al7075 and open-cell SiC foam composite and optimization of machining parameters

KARABULUT Ş., KARAKOÇ H.
NEURAL COMPUTING & APPLICATIONS , vol.28, no.2, pp.313-327, 2017 (SCI-Expanded) identifier identifier

Influence of B4C particle reinforcement on mechanical and machining properties of Al6061/B4C composites

KARABULUT Ş., KARAKOÇ H., Citak R.
COMPOSITES PART B-ENGINEERING , vol.101, pp.87-98, 2016 (SCI-Expanded) Sustainable Development identifier identifier

Study on the mechanical and drilling properties of AA7039 composites reinforced with Al2O/B4C/SiC particles

KARABULUT Ş., Gokmen U., Cinici H.
COMPOSITES PART B-ENGINEERING , vol.93, pp.43-55, 2016 (SCI-Expanded) identifier identifier

Experimental Investigation and Optimization of Cutting Force and Tool Wear in Milling Al7075 and Open-Cell SiC Foam Composite

KARABULUT Ş., Cinici H., KARAKOÇ H.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , vol.41, no.5, pp.1797-1812, 2016 (SCI-Expanded) identifier identifier

Optimization of surface roughness and cutting force during AA7039/Al2O3 metal matrix composites milling using neural networks and Taguchi method

Karabulut S.
MEASUREMENT , vol.66, pp.139-149, 2015 (SCI-Expanded) identifier identifier

AN INVESTIGATION OF CUTTING FORCES AND ANALYTICAL MODELLING IN MILLING COMPACTED GRAPHITE IRON WITH DIFFERENT LEAD ANGLES

Karabulut S., Gullu A.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.28, no.1, pp.135-143, 2013 (SCI-Expanded) identifier identifier

Farklı Yanaşma Açıları İle Vermiküler Grafitli Dökme Demirin Frezelenmesinde Kesme Kuvvetlerinin Araştırılması Ve Analitik Modellenmesi

KARABULUT Ş., GÜLLÜ A.
Journal Of The Faculty Of Engineering And Architecture Of Gazi University , vol.28, pp.135-143, 2013 (SCI-Expanded) identifier

CHIP BREAKING PROBLEMS IN MACHINING OF INCONEL 718 SUPER ALLOY AND CHIP BREAKER DESIGN

Gullu A., Karabulut S., Guldas A.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.23, no.1, pp.157-164, 2008 (SCI-Expanded) identifier identifier

Dynamic Chip Breaker Design for Inconel 718 Using Positive Angle Tool Holder

Gullu A., Karabulut S.
MATERIALS AND MANUFACTURING PROCESSES , vol.23, no.8, pp.852-857, 2008 (SCI-Expanded) identifier identifier

Articles Published in Other Journals

TÜRKİYE'DE METAL SEKTÖRÜNDE ÇALIŞAN SAĞIRLAR VE İŞİTME ENGELLİLERE İLİŞKİN BİR DURUM ANALİZİ

KALKAN Ö. K., KARABULUT Ş.
Sosyal Politika Çalışmaları Dergisi , vol.21, no.53, pp.941-962, 2021 (Peer-Reviewed Journal) identifier

Alüminyum Magnezyum Alaşımlarının Sürtünme Karıştırma Kaynağı İle Kaynak Edilebilirliğinin Değerlendirilmesi

BİLGİN M., KARABULUT Ş., ÖZDEMİR A.
Gazi Üniversitesi Fen Bilimleri Dergisi Part: C Tasarım ve Teknoloji , vol.5, pp.191-209, 2017 (Peer-Reviewed Journal)

Study on Machining Parameters for Thrust Force and Torque in Milling AA7039 Composites Reinforced with Al2O3/B4C/SiC Particles

KARABULUT Ş.
International Journal of Engineering Technologies, IJET , vol.2, no.2, pp.68-75, 2016 (Peer-Reviewed Journal)

Experimental Investigation of B4C Particulate Reinforced Aluminium 6061 Based Composite Material in Wire Cut EDM

KARABULUT Ş., GÖKMEN U., KARAKOÇ H., KALKAN Ö. K., ÇITAK R.
Metallofizika I Noveishie Tekhnologii , vol.37, pp.1239-1251, 2015 (Scopus)

Influence of lead angle variation on the coated carbide inserts wear when milling CGI and modeling by artificial neural networks and regression analysis method

Karabulut S., Güllü A.
Solid State Phenomena , pp.595-602, 2015 (Scopus) identifier

Wear model in milling compacted graphite iron with different lead angle using ceramic cutting tools

Karabulut Ş., Güllü A.
Solid State Phenomena , vol.199, pp.371-376, 2013 (Scopus) identifier identifier

Dynamic chip breaker design for nickel-base, Inconel 718, alloy with coated carbide tools using negative angle tool holder

Karabulut Ş., Gullu A.
Solid State Phenomena , pp.758-763, 2009 (Scopus) identifier identifier

AA7075-T6 ve AZ31B Alaşımlarının Sürtünme Karıştırma Kaynağı Üzerinde Ön Isıtma ve Kuru Buz Soğutmasının Etkisi

BİLGİN M., KARABULUT Ş., ÖZDEMİR A.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , 1900 (ESCI) Creative Commons License

Refereed Congress / Symposium Publications in Proceedings

Sanal gerçeklik ile yalın üretim uygulamaları

BİLGİN M., KARABULUT Ş.
5 th International Conference on Data Science and Applications 2022 (ICONDATA'22), Muğla, Turkey, 7 - 11 September 2022, vol.1, pp.154-160

Affecting Factors of Efficiency in Photovoltaic Energy Systems and Productivity-Enhancing Suggestions

AY İ., KADEMLİ M., KARABULUT Ş., Savas S.
2022 Innovations in Intelligent Systems and Applications Conference, ASYU 2022, Antalya, Turkey, 7 - 09 September 2022 Creative Commons License Sustainable Development identifier

Sürtünme Karıştırma Kaynağı ile Birleştirilmiş AA7075 ve AZ31B Alaşımlarının Kaynak Kalitesi Üzerine Çalışma

BİLGİN M., KARABULUT Ş., ÖZDEMİR A.
7th International Symposium on Innovative Technologies inEngineering and Science 2019 (ISITES2019), Şanlıurfa, Turkey, 22 - 24 November 2019, vol.2, pp.1058-1066 Creative Commons License

EXPERIMENTAL STUDY ON WELDING FORCES AND TEMPERATURE DURING THE DISSIMILARFRICTION STIR WELDING OF AA7075 AND AZ31B ALLOYS

BİLGİN M., KARABULUT Ş., ÖZDEMİR A.
The International Conference on Material Science and Technology (IMSTEC 2019), Kızılcahamam/ANKARA(, Turkey, 18 - 20 October 2019, pp.705-710

Study on the Mechanical Properties of Dissimilar Friction Stir Welding of AA 7075 T6 and AZ31B Alloys

BİLGİN M., KARABULUT Ş., Özdemir A.
9th International Conference on Mechanical and Aerospace Engineering, ICMAE 2018, Budapest, Hungary, 10 - 13 July 2018, pp.467-471 identifier

Study on the Wire Electrical Discharge Machining of AA 7075 Aluminum Alloy

KARABULUT Ş., KÖKÇAN R., BİLGİN M., Özdemir A.
9th International Conference on Mechanical and Aerospace Engineering, ICMAE 2018, Budapest, Hungary, 10 - 13 July 2018, pp.584-588 identifier

The Effect Of The Process Parameters On The Axial Force and Traverse Force In The Friction Stir Welding Of Al 7075 T6 and AZ91D

BİLGİN M., KARABULUT Ş., ÖZDEMİR A., KAYIR Y.
III International Conference on Engineering and Natural Sciences, Budapest, Hungary, 3 - 07 May 2017

A Novel Breaker Kit Design for Continuous Chip Breaking in Turning Operations

YILMAZ B., KARABULUT Ş., GÜLLÜ A.
ICENS International Conference on Engineering and Natural Science, 3 - 07 May 2017

Investigation of Cutting Force and Temperature Effect of Chip Breaker Used During Turning of Inconel 718 Material

YILMAZ B., KARABULUT Ş., GÜLLÜ A.
ICENS International Conference on Engineering and Natural Science, 03 May 2017

The effect of material pairs on the axial force, traverse force and temperature ın the friction stir welding process

BİLGİN M., KARABULUT Ş., ÖZDEMİR A.
3rd International Conference on Engineering and Natural Sciences (ICENS 2017), Budapest, Hungary, 3 - 07 May 2017, pp.812-818

The Effect Of Material Pairs On The Axial Force, Traverse Force And Temperature In The Friction Stir Welding Process

BİLGİN M., KARABULUT Ş., ÖZDEMİR A.
III INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES (ICENS), Budapest, Hungary, 3 May - 07 December 2017

METEB meslek yüksekokulu öğrencilerinin iş sağlığı ve güvenliğine ilişkin görüşleri: Hacettepe ASO 1. OSB MYO örneği

KARABULUT Ş., KALKAN Ö. K.
EĞİTİM ARAŞTIRMALARI BİRLİĞİ9. ULUSLARARASI EĞİTİM ARAŞTIRMALARI KONGRESİ, Ordu, Turkey, 11 - 17 May 2017, pp.605-606

Study on spindle vibration and surface finish in turning of al 7075

Şahinoğlu A., KARABULUT Ş., Güllü A.
9th International Congress on Precision Machining, ICPM 2017, Athens, Greece, 6 - 09 September 2017, pp.321-327 identifier

Fabrication of AA6061/B4C Composites and Investigation of Ballistic Performances

KARAKOÇ H., Cinici H., KARABULUT Ş., Citak R.
8th International Conference on Mechanical and Aerospace Engineering (ICMAE), Prague, Czech Republic, 22 - 25 July 2017, pp.822-825 identifier identifier

Effect of the B4C Reinforcement Ratio on Surface Roughness of Al6061 Based Metal Matrix Composite in Wire-EDM Machining

KARABULUT Ş., KARAKOÇ H., Citak R.
8th International Conference on Mechanical and Aerospace Engineering (ICMAE), Prague, Czech Republic, 22 - 25 July 2017, pp.812-815 identifier identifier

AISI 304 PASLANMAZ ÇELİĞİNİN TORNALANMASI ESNASINDA KULLANILAN DİNAMİK TALAŞ KIRICININ YÜZEY PÜRÜZLÜLÜĞÜ ÜZERİNE ETKİLERİNİN ARAŞTIRILMASI

YILMAZ B., KARABULUT Ş., GÜLLÜ A.
http://www.utis2016.org/, Turkey, 3 - 05 November 2016

Testing Apparatus Design Capable Of Measuring Triaxial Force and Change of the Temperature

BİLGİN M., KARABULUT Ş., ÖZDEMİR A.
http://www.umyos.org, 18 - 20 May 2016

Alumix 231 Esaslı SiC ve Al2O3 Takviyeli Hibrit Kompozit Üretimi ve Karakterizasyonu

KARAKOÇ H., GÖKMEN U., TAŞCI U., KIRMIZI G., KARABULUT Ş.
2. Uluslararası Multidisipliner Avrasya Kongresi, 11 - 13 July 2016

Investigation of Surface Roughness in Turning of Cobased Super Alloy Haynes 25 under Cryogenic Cooling

SARIKAYA M., KARABULUT Ş., GÜLLÜ A.
2nd International Conference on Engineering and Natural Sciences (ICENS 2016), 24 - 28 May 2016

Prediction of Surface Roughness in Milling Compacted Graphite Iron with Artificial Neural Network and Regression Analysis

KARABULUT Ş., SARIKAYA M., GÜLLÜ A.
2nd International Conference on Engineering and Natural Sciences (ICENS 2016), 24 - 28 May 2016

Analytical Modelling of Surface Roughness during Compacted Graphite Iron Milling Using Ceramic Inserts

KARABULUT Ş., GÜLLÜ A., GÜLDAŞ A., GÜRBÜZ R.
Machining and Machinability of Materials, 13 - 14 August 2015

Optimization of Surface Roughness in Wire Cut EDM of AA6061 B4Cp Using Response Surface Method

KARABULUT Ş., KARAKOÇ H., KALKAN Ö. K., ÇITAK R.
International Conference on Engineering and Natural Sciences, Üsküp, Macedonia, 15 - 19 May 2015

AA6061 Matrisli 15 B4Cp Takviyeli Kompozit Malzemelerin TM Yöntemi ile Üretimi ve T6 Yaşlandırma Süresinin Sertliğe Olan Etkilerinin İncelenmesi

KARAKOÇ H., KARABULUT Ş., ÇALIN R., ÇITAK R.
Uluslararası Katılımlı 1. Savunma Sanayi Sempozyumu, Kırıkkale, Turkey, 9 - 10 April 2015

Books & Book Chapters

Creating Accessible Interactive Training Materials in Manufacturing Engineering

Karabulut Ş., Okyayuz A. Ş.
in: Notes for Manufacturing Instructors , Diego Carou,J. Paulo Davim, Editor, Springer Nature, Berlin, pp.289-317, 2024

Metrics

Publication

61

Citation (WoS)

599

H-Index (WoS)

11

Citation (Scopus)

643

H-Index (Scopus)

12

Project

28

Intellectual Property

1

Thesis Advisory

2

Open Access

4
UN Sustainable Development Goals