Doç. Dr. HALİL KARAKOÇ | AVESİS

Akademik Veri Yönetim Sistemi

Yayınlar & Eserler

Makaleler 31

1. Microstructure-guided selection of nanofluid-assisted MQL strategies for machinability of WAAM-fabricated stainless steel–inconel bimetallic structures

OZANER O. C., ÇAVUŞ Y., KARAKOÇ H., KARABULUT Ş., Talemi R., Tjahjowidodo T., et al.

Progress in Additive Manufacturing , ss.1-15, 2025 (ESCI, Scopus)

2. Influence of nanofluids on the tribological performance, tool wear, and surface roughness of LPBF and forged IN718 alloys

KARAKOÇ H., KARABULUT Ş., Ozaner O. C.

WEAR , 2025 (SCI-Expanded)

3. Influence of Deposition Sequence and Thermal Cycles on the Microstructure and Wear Behavior of WAAM-Fabricated SS309L and Inconel 625 Bimetallic Structures

Ozaner O. C., KARABULUT Ş., KARAKOÇ H., Sharma A., Talemi R., Tjahjowidodo T.

METALS AND MATERIALS INTERNATIONAL , 2025 (SCI-Expanded)

4. Mechanical characterization of sandwich composite structures with Alumix231 foam core between Al2024/B₄C composite plates

Saygili B., Albayrak S., KARAKOÇ H., ÇİNİCİ H., ÇITAK R.

MATERIALS TESTING , sa.3, ss.457-470, 2025 (SCI-Expanded)

5. Study on the wear characteristics of INCO939 alloy manufactured by laser powder bed fusion and casting.

KARABULUT Ş., KARAKOÇ H., BİLGİN M., Subaşı L., Dursun G., Ozaner O. C.

Tribology International , cilt.194, 2024 (SCI-Expanded)

6. Study on the friction drilling behaviors and tribological properties of aluminum matrix composites

KARAKOÇ H., BİLGİN M., KARABULUT Ş.

Materials Today Communications , cilt.38, 2024 (SCI-Expanded)

7. An experimental investigation on machining-induced surface/subsurface characteristics of nickel based Inc-718 alloy: A novel hybrid approach in milling process

Bilgin M., Karabulut Ş., Karakoç H., Kayır Y., Sarıkaya M.

Tribology International , cilt.191, 2024 (SCI-Expanded)

8. Comparative study of hardfacing applications on structural steel surfaces to improve ballistic properties

Sözeri M., ÖZDEMİR U., FINDIK T., KARAKOÇ H.

Materials Today Communications , cilt.38, 2024 (SCI-Expanded)

9. Effect of process parameters of Al5083/SiC surface composites fabricated by FSP on microstructure, mechanical properties and wear behaviors

Kaya N., ÇETİNKAYA C., KARAKOÇ H., ADA H.

Materials Chemistry and Physics , cilt.315, 2024 (SCI-Expanded)

10. Influence of gradation in the reinforcement particles on the interfacial microstructure and mechanical properties of functionally graded composites

KARAKOÇ H., ÇİNİCİ H., Saravana Kumar M., YILMAZ T., Ovalı İ., Yang C., et al.

Materials Today Communications , cilt.38, 2024 (SCI-Expanded)

11. Electrochemical, mechanical, and antibacterial properties of the AZ91 Mg alloy by hybrid and layered hydroxyapatite and tantalum oxide sol-gel coating

ALBAYRAK S., Gül C., Emin N., GÖKMEN U., KARAKOÇ H., Uzun A., et al.

Materialpruefung/Materials Testing , cilt.65, sa.11, ss.1628-1644, 2023 (SCI-Expanded)

12. Effect of SiC Particle Size on the Mechanical and Wear Behavior of Al356 Metal Matrix Composites

Silicon , cilt.15, sa.15, ss.6729-6744, 2023 (SCI-Expanded)

13. Mechanical Properties of Al2024/Al2O3/MgO/Graphite composites via hydro-thermal hot pressing route

Ovalı İ., Esen C., ALBAYRAK S., KARAKOÇ H., Saravana Kumar M., Yang C.

Materials Chemistry and Physics , cilt.302, 2023 (SCI-Expanded)

14. Investigation of microstructure, mechanical, and tribological properties of SiC/h-BN/Gr hybrid reinforced Al6061 matrix composites produced by hot extrusion method

Çinici H., KARAKOÇ H., ŞAHİN Ö., Ovalı İ.

Diamond and Related Materials , cilt.136, 2023 (SCI-Expanded)

15. Microstructural properties and impact behavior of AA5083/Al2O3 functionally graded composite material with surface foam layer produced through powder metallurgy

Ardıçoğlu H., KARAKOÇ H., Çinici H.

Materials Today Communications , cilt.35, 2023 (SCI-Expanded)

16. A comparative study on mechanical and ballistic performance of functionally graded Al6061 composites reinforced with B4C, SiC, and Al2O3

KARABULUT Ş., KARAKOÇ H., BİLGİN M., Canpolat H., Krolczyk G. M., Sarıkaya M.

Journal of Materials Research and Technology , cilt.23, ss.5050-5065, 2023 (SCI-Expanded)

17. Performance analysis on mechanical and machinability attributes of Al6061-B4C-T6 composites processed via hot extrusion

Tinga S., KARAKOÇ H., YAĞMUR S., Saravana Kumar M., ŞEKER U., ÇITAK R.

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , 2023 (SCI-Expanded)

18. A study on the influence of thermally assisted novel hybrid methods on the drilling behavior of Ti6Al4V alloy

KARABULUT Ş., BİLGİN M., KARAKOÇ H., Khanna N., Sarikaya M.

TRIBOLOGY INTERNATIONAL , cilt.175, 2022 (SCI-Expanded)

19. Study of the Heat-Assisted Milling of Ti-6Al-4V Under Dry and Minimum-Quantity-Lubrication

KARABULUT Ş., BİLGİN M., KARAKOÇ H., Skondras Giousios D., Markopoulos A. P.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.47, sa.7, ss.9287-9304, 2022 (SCI-Expanded)

20. Production of Powder Metal Al7075/B4C/Si3N4 Composite Materials and Investigation of Wear Properties

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.23, sa.4, ss.1141-1151, 2020 (ESCI)

21. B4C/SiC/Al2O3 Particle Reinforced Aluminum Sandwich Foam and Ramor 500 Armor Steel to be Combined and Investigation of the Ballistic Performance

KARAKOÇ H., ULUTAŞ A., Cinici H.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.23, sa.2, ss.297-310, 2020 (ESCI)

Creative Commons License

22. Wear and mechanical properties of Al6061/SiC/B4C hybrid composites produced with powder metallurgy

KARAKOÇ H., OVALI İ., Dundar S., ÇITAK R.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T , cilt.8, sa.6, ss.5348-5361, 2019 (SCI-Expanded)

23. Study on mechanical and ballistic performances of boron carbide reinforced Al 6061 aluminum alloy produced by powder metallurgy

KARAKOÇ H., KARABULUT Ş., Citak R.

COMPOSITES PART B-ENGINEERING , cilt.148, ss.68-80, 2018 (SCI-Expanded)

24. Investigation of surface roughness in the milling of Al7075 and open-cell SiC foam composite and optimization of machining parameters

KARABULUT Ş., KARAKOÇ H.

NEURAL COMPUTING & APPLICATIONS , cilt.28, sa.2, ss.313-327, 2017 (SCI-Expanded)

25. Investigation of mechanical properties of tubular aluminum foams

UZUN A., KARAKOÇ H., GÖKMEN U., Cinici H., TÜRKER M.

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.107, sa.11, ss.996-1004, 2016 (SCI-Expanded)

26. Influence of B4C particle reinforcement on mechanical and machining properties of Al6061/B4C composites

KARABULUT Ş., KARAKOÇ H., Citak R.

COMPOSITES PART B-ENGINEERING , cilt.101, ss.87-98, 2016 (SCI-Expanded) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

27. Experimental Investigation and Optimization of Cutting Force and Tool Wear in Milling Al7075 and Open-Cell SiC Foam Composite

KARABULUT Ş., Cinici H., KARAKOÇ H.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.41, sa.5, ss.1797-1812, 2016 (SCI-Expanded)

28. Mechanical and ballistic properties of powder metal 7039 aluminium alloy joined by friction stir welding

Erdem M., Cinici H., GÖKMEN U., KARAKOÇ H., TÜRKER M.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , cilt.26, sa.1, ss.74-84, 2016 (SCI-Expanded)

29. Experimental Investigation of B4C Particulate Reinforced Aluminium 6061 Based Composite Material in Wire Cut EDM

KARABULUT Ş., GÖKMEN U., KARAKOÇ H., KALKAN Ö. K., ÇITAK R.

Metallofizika I Noveishie Tekhnologii , cilt.37, ss.1239-1251, 2015 (Scopus)

30. Laser surface treatment of aluminum based composite mixed with B4C particles

YILBAS B. S., KARATAS C., KARAKOÇ H., ALEEM B. J. A., KHAN S., AL-AQEELI N.

OPTICS AND LASER TECHNOLOGY , cilt.66, ss.129-137, 2015 (SCI-Expanded)

31. INVESTIGATION OF THE PENETRATION BEHAVIOR OF AlSi7 FOAM, PRODUCED BY POWDER METALLURGY METHOD, UNDER LOW-VELOCITY IMPACT ENERGIES

Cinici H., Gokmen U., UZUN A., KARAKOÇ H., Gode C., Turker M.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.29, sa.2, ss.395-400, 2014 (SCI-Expanded)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 2

1. Fabrication of AA6061/B4C Composites and Investigation of Ballistic Performances

KARAKOÇ H., Cinici H., KARABULUT Ş., Citak R.

8th International Conference on Mechanical and Aerospace Engineering (ICMAE), Prague, Çek Cumhuriyeti, 22 - 25 Temmuz 2017, ss.822-825, (Tam Metin Bildiri)

2. Effect of the B4C Reinforcement Ratio on Surface Roughness of Al6061 Based Metal Matrix Composite in Wire-EDM Machining

KARABULUT Ş., KARAKOÇ H., Citak R.

8th International Conference on Mechanical and Aerospace Engineering (ICMAE), Prague, Çek Cumhuriyeti, 22 - 25 Temmuz 2017, ss.812-815, (Tam Metin Bildiri)

Metrikler

Yayın

33

Yayın (WoS)

32

Yayın (Scopus)

31

Atıf (WoS)

319

H-İndeks (WoS)

9

Atıf (Scopus)

281

H-İndeks (Scopus)

8

Proje

15

Açık Erişim

1

BM Sürdürülebilir Kalkınma Amaçları