Metrics
Publication
19
Open Access
2
UN Sustainable Development Goals
Research Areas
Machining Methods
Machine Dynamics
System Dynamics and Control
Mechanical Vibrations
Research Areas Based on Academic Activities
Avesis Research Areas
WoS Research Areas
Scopus Research Areas
Academic Positions
2023 - Present
2023 - PresentAssistant Professor
Hacettepe University, Mühendislik Fakültesi, Makina Mühendisliği Bölümü
2022 - 2023
2022 - 2023Researcher
University of Bath, Mechanical Engineering
Articles
All (12)
SCI-E, SSCI, AHCI (9)
SCI-E, SSCI, AHCI, ESCI (9)
Scopus (10)
Other Publications (2)
2026
20261. Optimisation of multiple tuned mass dampers for chatter suppression in milling tools
Doğan H.
JOURNAL OF SOUND AND VIBRATION , vol.631, no.119728, pp.1-13, 2026 (SCI-Expanded, Scopus)
2025
20252. Feasibility study of chatter suppression in milling through internal channels
DOĞAN H., Ozsoy M., Namlu R. H.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
, vol.140, no.9-10, pp.5049-5057, 2025 (SCI-Expanded, Scopus)
2025
20253. Shake table experimental validation of auxiliary mass effects in a tuned viscous mass damper
Deastra P., DOĞAN H., Xie R., Ikago K.
STRUCTURES
, vol.80, 2025 (SCI-Expanded, Scopus)
2025
20254. Effect of tool cavity conditions on damping, chatter mitigation, and surface quality in internally cooled milling tools
Namlu R. H., Doğan H., Ozsoy M.
Procedia CIRP , vol.133, pp.1-10, 2025 (Conference Book)
2024
20245. Utilising computational fluid dynamics to investigate damping effects in fluid inerter-based vibration control devices
Doğan H., Tamer A., Enes Salman H., Deastra P.
JOURNAL OF PHYSICS: CONFERENCE SERIES , vol.2909, no.1, pp.1-2, 2024 (Peer-Reviewed Journal)
2024
20246. Sensors for in-process and on-machine monitoring of machining operations
Shokrani A., DOĞAN H., Burian D., Nwabueze T. D., Kolar P., Liao Z., et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY
, vol.51, pp.263-292, 2024 (SCI-Expanded, Scopus)
2024
20247. Using machine learning for cutting tool condition monitoring and prediction during machining of tungsten
Omole S., DOĞAN H., Lunt A. J. G., Kirk S., Shokrani A.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING
, vol.37, no.6, pp.747-771, 2024 (SCI-Expanded, Scopus)
2024
20248. Analysis of virtual inerter-based passive absorber for active chatter control
DOĞAN H., Ozsoy M., Ozturk E., Wagg D. J., Sims N. D.
JOURNAL OF SOUND AND VIBRATION
, vol.578, 2024 (SCI-Expanded, Scopus)
2023
20239. Implementation of Inerter-Based Dynamic Vibration Absorber for Chatter Suppression
Doğan H., Sims N. D., Wagg D. J.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING, TRANSACTIONS OF THE ASME , vol.145, pp.1, 2023 (SCI-Expanded, Scopus)
2023
202310. TOWARDS SUSTAINABLE AND INTELLIGENT MACHINING: ENERGY FOOTPRINT AND TOOL CONDITION MONITORING FOR MEDIA-ASSISTED PROCESSES
Dogan H., Jones L., Hall S., Shokrani A.
Journal of Machine Engineering
, vol.23, no.2, pp.16-40, 2023 (Scopus)
2022
202211. Design, testing and analysis of a pivoted-bar inerter device used as a vibration absorber
Dogan H., Sims N. D., Wagg D. J.
Mechanical Systems and Signal Processing
, vol.171, 2022 (SCI-Expanded, Scopus)
2018
201812. Effect of joint flexibility on vibration characteristics of a composite box manipulator
MALGACA L., DOĞAN H., AKDAĞ M., YAVUZ Ş., UYAR M. B., Bidikli B.
Composite Structures
, vol.183, no.1, pp.271-277, 2018 (SCI-Expanded, Scopus)
Papers Presented at Peer-Reviewed Scientific Conferences
2025
20251. Removing Unwanted Objects from Image/Frame by Generating Sub-Images Through Generative Adversarial Network
Choupani R., DOĞAN H.
Future Technologies Conference, FTC 2025, Munich, Germany, 6 - 07 November 2025, vol.1677 LNNS, pp.462-474, (Full Text)
2024
20242. Chip Morphology Prediction in Inconel 718 Milling through Machine Learning to Control Surface Integrity
Mypati O., DOĞAN H., Robles-Linares J. A., Shokrani A., Liao Z.
7th Conference on Surface Integrity-CSI, Bremen, Germany, 15 - 17 May 2024, vol.123, pp.440-445, (Full Text)
2023
20233. Investigation of chatter detection with sensor-integrated tool holders based on strain measurement
DOĞAN H., Shokrani A.
19th CIRP Conference on Modeling of Machining Operations, CMMO 2023, Karlsruhe, Germany, 31 May - 02 June 2023, vol.117, pp.157-162, (Full Text)
2022
20224. Active Chatter Suppression Through Virtual Inerter-Based Passive Absorber Control
Ozsoy M., Doğan H., Ozturk E., Wagg D. J., Sims N. D.
Machining Innovations Conference for Aerospace Industry (MIC) 2022, Hannover, Germany, 30 November 2022 - 01 December 2023, vol.1, pp.1, (Full Text)
2020
20205. The effects of parasitic mass on the performance of inerter-based dynamic vibration absorbers
Dogan H., Sims N. D., Wagg D. J.
11th International Conference on Structural Dynamics, EURODYN 2020, Virtual, Athens, Greece, 23 - 26 November 2020, vol.1, pp.1545-1555, (Full Text)
2020
20206. Design and implementation of TID for vibration suppression
Dogan H., Sims N., Wagg D.
2020 International Conference on Noise and Vibration Engineering, ISMA 2020 and 2020 International Conference on Uncertainty in Structural Dynamics, USD 2020, Leuven, Belgium, 7 - 09 September 2020, pp.3087-3096, (Full Text)
2019
20197. Investigation of the inerter-based dynamic vibration absorber for machining chatter suppression
Dogan H., Sims N. D., Wagg D. J.
13th International Conference on Recent Advances in Structural Dynamics, RASD 2019, Lyon, France, 15 - 17 April 2019, vol.1264, (Full Text)