Metrikler
Yayın
31
BM Sürdürülebilir Kalkınma Amaçları
Biyografi
Hamit
Tekin received his B.S. and M.S. degrees in Mechanical Engineering from Tabriz
University. He completed his Ph.D. at Middle East Technical University in 2017.
He currently holds the position of Associate Professor in the Department of
Mechanical Engineering at Hacettepe University, Ankara. His research focuses on
the mechanical characterization of fiber-reinforced composites and additive
manufacturing technologies.
Eğitim Bilgileri
2011 - 2017
2011 - 2017Doktora
Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Makina Mühendisliği Bölümü, Türkiye
2002 - 2005
2002 - 2005Yüksek Lisans
Tabriz University, Engineering, Mechanical Engineering, İran
1998 - 2002
1998 - 2002Lisans
Tabriz University, Engineering, Mechanical Engineering, İran
Yaptığı Tezler
2017
2017Doktora
Design and manufacturing of electrically conductive composites via microvascular channels
Orta Doğu Teknik Üniversitesi
Araştırma Alanları
Makina Mühendisliği
Konstrüksiyon ve İmalat
Geleneksel olmayan imalat yöntemleri
Mekanik
Mekanik Testler
Kompozitler
Mühendislik ve Teknoloji
Akademik Faaliyetlere Dayalı Araştırma Alanları
Avesis Araştırma Alanları
WoS Araştırma Alanları
Scopus Araştırma Alanları
Akademik Ünvanlar / Görevler
2024 - Devam Ediyor
2024 - Devam EdiyorDoç. Dr.
Hacettepe Üniversitesi, Mühendislik Fakültesi, Makina Mühendisliği Bölümü
2023 - 2024
2023 - 2024Doç. Dr.
Türk Hava Kurumu Üniversitesi
2018 - 2023
2018 - 2023Dr. Öğr. Üyesi
Türk Hava Kurumu Üniversitesi, Engineering, Mechanical Engineering
Yönetimsel Görevler
2024 - Devam Ediyor
2024 - Devam EdiyorErasmus Programı Kurum Koordinatörü
Hacettepe Üniversitesi, Mühendislik Fakültesi, Makina Mühendisliği Bölümü
2024 - 2024
2024 - 2024Bölüm Başkanı
Türk Hava Kurumu Üniversitesi, Engineering Faculty, Mechanical Engineering
2023 - 2024
2023 - 2024Bölüm Başkanı
Türk Hava Kurumu Üniversitesi, Engineering Faculty, Mechatronic Engineering
2022 - 2024
2022 - 2024Dekan Yardımcısı
Türk Hava Kurumu Üniversitesi, Engineering Faculty
2021 - 2024
2021 - 2024Anabilim/Bilim Dalı Başkanı
Türk Hava Kurumu Üniversitesi
2020 - 2022
2020 - 2022Sürekli Eğitim Merkezi Müdürü
Türk Hava Kurumu Üniversitesi
Yönetilen Tezler
2019
2019Yüksek Lisans
Investigation of stress distribution in glass fiber reinforced composite materials with microvascular channels under transverse loading and bending
Sabuncuoğlu B., Tanabi H.(Eş Danışman), TEKİN H. (Eş Danışman)
A.GENCER(Öğrenci)
Makaleler
Tümü (13)
SCI-E, SSCI, AHCI (10)
SCI-E, SSCI, AHCI, ESCI (10)
Scopus (12)
TRDizin (1)
2025
20251. Artificial neural networks for predicted bending properties of additively manufactured pyramidal lattice truss core sandwich structures
KARAGÖZLÜ C., Ayli E., TEKİN H., SABUNCUOĞLU B.
MATERIALS TODAY COMMUNICATIONS
, cilt.47, 2025 (SCI-Expanded, Scopus)
2025
20252. A multi-objective investigation of warpage and mechanical performance in FDM-printed thermoplastic composites
TEKİN H., Ndacyayisenga W., Ghaziani M.
JOURNAL OF COMPOSITE MATERIALS
, 2025 (SCI-Expanded, Scopus)
2024
20243. Experimental and numerical study on the ballistic performance of laminated ceramics
Cura M., Tanabi H., SABUNCUOĞLU B.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
, cilt.193, 2024 (SCI-Expanded, Scopus)
2023
20234. Experimental and analytical investigation of the tensile behavior of 3D-printed composites based on micro-CT analysis
Şik A., Tanabi H., Çubukçu H. E., Sabuncuoğlu B.
Journal of Thermoplastic Composite Materials
, 2023 (SCI-Expanded, Scopus)
2022
20225. Stress analysis of vascularized glass fiber composites exposed to bending loading
Tanabi H., Atasoy A. G., Demiral M., Sabuncuoğlu B.
ADVANCED COMPOSITE MATERIALS
, cilt.31, sa.2, ss.208-220, 2022 (SCI-Expanded)
2022
20226. Investigation of the shear properties of 3D printed short carbon fiber-reinforced thermoplastic composites
Tanabi H.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
, cilt.35, sa.11, ss.2177-2193, 2022 (SCI-Expanded, Scopus)
2021
20217. Investigation of the temperature effect on the mechanical properties of 3D printed composites
TEKİN H.
International Advanced Researches and Engineering Journal
, cilt.5, sa.2, ss.188-193, 2021 (TRDizin)
2020
20208. Experimental and numerical investigation of transverse shear behavior of glass-fibre composites with embedded vascular channel
Demiral M., Tanabi H., SABUNCUOĞLU B.
COMPOSITE STRUCTURES
, cilt.252, 2020 (SCI-Expanded, Scopus)
2020
20209. Micro-CT analysis of deviations in fiber orientation and composite stiffness near the microvascular channels embedded in glass-fiber reinforced composites
SABUNCUOĞLU B., Tanabi H., Soete J., Lomov S.
COMPOSITE STRUCTURES
, cilt.237, 2020 (SCI-Expanded, Scopus)
2019
201910. Development of strain monitoring system for glass fiber reinforced composites via embedded electrically conductive pathways
Tanabi H., Erdal M.
ADVANCED COMPOSITE MATERIALS
, cilt.28, sa.6, ss.653-673, 2019 (SCI-Expanded, Scopus)
2018
201811. Investigation of stress distributions in the resin rich region and failure behavior in glass fiber composites with microvascular channels under tensile loading
Al-Shawk A., Tanabi H., Sabuncuoglu B.
COMPOSITE STRUCTURES
, cilt.192, ss.101-114, 2018 (SCI-Expanded, Scopus)
2011
201112. Real-time tool wear monitoring based on feed motor current in chuck- center mounting condition
TEKİN H., Babaei N., Babaei A.
ADVANCED MATERIALS RESEARCH
, cilt.341, ss.307-312, 2011 (Scopus)
2011
201113. investigation of Grinding Surface Temperature: Experimental Measurements and Numerical Modeling
Babaei N., Babaei A., TEKİN H.
ADVANCED MATERIALS RESEARCH
, cilt.341, ss.147-151, 2011 (Scopus)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler
2024
20241. Characterization of Mechanical Properties of a Novel Hybrid Lattice StructureFabricated with Different Materials in Additive Manufacturing
TEKİN H., SALAMCI M. U., SALAMCİ E., Batur C., Sırtlı Ş. N.
International Conference on Experimental and Computational Engineering Sciences ICECES 2024, Ankara, Türkiye, 30 - 31 Mayıs 2024, (Özet Bildiri)
2024
20242. Design and Analysis of composite rotor blades for the unmanned Helicopter
Bitare E., TEKİN H.
International Conference on Experimental and Computational Engineering Sciences ICECES 2024, Ankara, Türkiye, 30 - 31 Mayıs 2024, (Özet Bildiri)
2024
20243. Investigation of the warpage at FDM printed carbon fiber reinforced PA612
Ndacyayisenga W., TEKİN H.
International Conference on Experimental and Computational Engineering Sciences ICECES 2024, Ankara, Türkiye, 30 Mayıs 2024, ss.88, (Özet Bildiri)
2024
20244. Investigation of the infill structure on fatigue properties of FDM-printed thermoplastics
SAABA J., TEKİN H.
International Conference on Experimental and Computational Engineering Sciences ICECES 2024, Ankara, Türkiye, 30 - 31 Mayıs 2024, ss.124, (Özet Bildiri)
2022
20225. DETERMINATION OF FIBER ORIENTATIONS AND STIFFNESS PROPERTIES VIA MICRO-CT SCAN IMAGES: APPLICATION TO COMPOSITE MATERIALS WITH MICROVASCULAR CHANNELS
SABUNCUOĞLU B., TEKİN H., Soete J., Lomov S.
UMTIK 2022, Türkiye, 31 Ağustos 2022, (Tam Metin Bildiri)
2021
20216. CHARACTERIZATION OF 3D PRINTED SHORT GLASS FIBER REINFORCED POLYMERS AT VARIOUS TEMPERATURE
TEKİN H.
Uluslararası Mühendislik Bilimleri ve Multidisipliner Yaklaşımlar Kongresi, Türkiye, 23 - 24 Şubat 2021, (Özet Bildiri)
2020
20207. Flexural Properties of Glass Fiber Reinforced Laminates with Embedded Vasculature
TEKİN H.
The 9th International Scientific Research Congress, Ankara, Türkiye, 12 Aralık 2020, (Özet Bildiri)
2020
20208. Evaluation of machinability of alloy ductile iron in term of thrust drilling force
TEKİN H.
8th International Symposium on Innovative Technologies in Engineering and Science, Bursa, Türkiye, 23 Ekim 2020, cilt.3, ss.91-97, (Tam Metin Bildiri)
2019
20199. Micro-CT measurement of fiber disturbance and composite stiffness: Application to in glass-fiber reinforced composites with embedded microvascular channels
TEKİN H., SABUNCUOĞLU B., Soete J., Lomov S.
Euromech Colloquium 602, Lyon, Fransa, 13 - 15 Mart 2019, (Özet Bildiri)
2018
201810. DESIGN AND MANUFACTURING OF ELECTRICALLY CONDUCTIVE COMPOSITES VIA MICROVASCULAR CHANNELS
TEKİN H., ERDAL ERDOĞMUŞ M.
4th International Conference on Mechanics of Composites, İspanya, 9 - 12 Temmuz 2018, (Özet Bildiri)
2018
201811. The effect of manufacturing parameters on the stress concentrations in composites with micro-vascular channels under transverse loading
Al Shawk A., TEKİN H., SABUNCUOĞLU B.
4th International Conference on Mechanics of Composites, İspanya, 09 Temmuz 2018, (Özet Bildiri)
2017
201712. Stress Concentrations in Composites with Microvascular Channels
AL SHAWK A., TANABİ H., SABUNCUOĞLU B.
Procedia Structural Integrity, 25 - 26 Eylül 2017, (Tam Metin Bildiri)
2014
201413. Resin Transfer Molding of Particle-Filled, Continuous-Fiber Reinforced Composites
TEKİN H., Aydil T., ERDAL ERDOĞMUŞ M.
American Society for Composites 29th Technical Conference,16th USJapan Conference on Composite Materials, ASTM-D30 Meeting, Amerika Birleşik Devletleri, 08 Eylül 2014, (Özet Bildiri)
2014
201414. PARTICLE DEPOSITION IN RESIN TRANSFER MOLDING OF ADVANCED COMPOSITES
Aydil T., TEKİN H., ERDAL ERDOĞMUŞ M.
The 16th International Conference on Machine Design and Production (UMTIK 2014), İzmir, Türkiye, 30 Haziran 2014, (Tam Metin Bildiri)
2013
201315. Experimental Investigation of Particle-Filler Distribution in Continuous Fiber-Reinforced Composites Produced via Liquid Molding
Aydil T., TEKİN H., ERDAL ERDOĞMUŞ M.
28th Technical Conference of the American-Society-for-Composites, Amerika Birleşik Devletleri, 11 Eylül 2013, (Tam Metin Bildiri)