Metrics
Publication
107
Open Access
3
UN Sustainable Development Goals
Biography
He is a professor of prosthodontics with tenure track position at Hacettepe University, Faculty of Dentistry mainly for education & research(clinical/preclinical) activities, and maintains clinical practice in his private dental office in Ankara.
He integrates educational/research expertise and skills in the field of Dental Implantology, Digital Dentistry and Evidence Based Dentistry with daily clinical practice.
Accordingly, his focus of interest is optimization of evolving dental technologies in treatment planning and clinical practice of teeth/implant supported fixed prosthesis both in esthetic and functional zone.
Education
1994 - 1998
1994 - 1998Doctorate
Hacettepe University, Diş Hekimliği Fakültesi, Protetik Diş Tedavisi , Turkey
Foreign Languages
C1 Advanced
C1 AdvancedEnglish
Certificates, Courses and Trainings
2013
2013Evidence Based Practice Workshop
Vocational Training
McMaster University, Hamilton, Ontario, Canada
2013
2013Master’s Course in Regenerative and Esthetic Periodontal Therapy
Vocational Course
University of Bern, Switzerland.
2010
2010Master Course in GBR and Sinus Grafting Procedures
Vocational Course
University of Berne, Switzerland.
2010
2010CEBM Workshop in Evidence Based Practice-II.
Vocational Training
University of Oxford, England.
2009
2009CEBM Workshop in Evidence Based Practice-I
Vocational Training
University of Oxford, England.
2005
2005Master’s Course in Esthetic Implant Dentistry
Vocational Course
University of Berne, Switzerland
2001
2001ITI(International Team for Implantology) Education Week.
Vocational Course
University of Berne, Switzerland.
Research Areas
Dentistry
Clinical Sciences
Prosthetic Dentistry
Crown Bridge
Health Sciences
Research Areas Based on Academic Activities
Avesis Research Areas
WoS Research Areas
Scopus Research Areas
Supervised Theses
2022
2022Dental Specialty
İmplant destekli sabit protez yapımında direkt dijital ölçü için kullanılan farklı tarama postlarının hassasiyetinin değerlendirilmesi: metodolojik klinik çalışma
Akça K. (Advisor)
F.DEMİR(Student)
2017
2017Dental Specialty
Evaluation of Intraoral Scanning Technique in Fabrication of Implant Supported Full Arch Fixed Screw Retained Superstructure.
Akça K. (Advisor)
M.VAROL(Student)
2015
2015Dental Specialty
In-vitro Examination of the Biomechanical Relationship Between Titanium-Zirconium Alloy Dental İmplants and Different Abutment Materials
Akça K. (Advisor)
H.YERLİKAYA(Student)
2012
2012Doctorate
Evaluation of biomechanical properties of glass-ceramic endocrowns clinically and pre-clinica lly
Akça K. (Advisor)
D.HASANOĞLU(Student)
2007
2007Postgraduate
Finite element investigation of mechanical interaction of dental implants with bone
AKÇA K.
A.ESER(Student)
Articles
All (95)
SCI-E, SSCI, AHCI (90)
SCI-E, SSCI, AHCI, ESCI (90)
Scopus (91)
TRDizin (3)
Other Publications (1)
2025
20251. Comparison of fixed dental prostheses digitally fabricated using various scan bodies: a clinical study
DEMİR BOZ F., AKÇA K.
JOURNAL OF ADVANCED PROSTHODONTICS
, no.2, pp.70-82, 2025 (SCI-Expanded, Scopus)
2025
20252. A Retrospective Cohort Study on Scan Quality of Implant Scanbodies Matched With CAD Libraries
DEMİR BOZ F., AKÇA K.
CLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH
, no.1, 2025 (SCI-Expanded, Scopus)
2024
20243. Comparison of conventional and digital impression approaches for edentulous maxilla: clinical study
Karaca S. K., AKÇA K.
BMC ORAL HEALTH
, vol.24, no.1, 2024 (SCI-Expanded, Scopus)
2024
20244. Replacement of a single-tooth implant restoration with the abutment dual-scanning technique: a case report
DEMİR BOZ F., AKÇA K.
BMC ORAL HEALTH
, vol.24, no.1, 2024 (SCI-Expanded, Scopus)
2023
20235. Occlusal adjustment of 3-unit tooth-supported fixed dental prostheses fabricated with complete-digital and -analog workflows: A non-randomized crossover clinical trial
Karasan D., Sailer I., Lee H., DEMİR F., Zarauz C., AKÇA K.
Journal of Dentistry
, vol.128, 2023 (SCI-Expanded, Scopus)
2018
20186. Mechanical Failure of Endocrowns Manufactured with Different Ceramic Materials: An In Vitro Biomechanical Study
AKTAŞ G., YERLİKAYA H., AKÇA K.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY
, vol.27, no.4, pp.340-346, 2018 (SCI-Expanded, Scopus)
2016
20167. Implant fractures: etiology, prevention, and treatment
Eckert S. E., Salinas T. J., AKÇA K.
DENTAL IMPLANT COMPLICATIONS: ETIOLOGY, PREVENTION, AND TREATMENT, 2ND EDITION
, pp.132-144, 2016 (SCI-Expanded)
2015
20158. Immediately placed and functionally loaded implants supported a fixed prosthesis in a mandibular edentulous arch a case report
AKTAŞ G., AKTAŞ A., AKÇA K.
Clinical Dentistry and Research
, vol.39, pp.80-86, 2015 (Scopus, TRDizin)
2015
20159. Numerical assessment of bone remodeling around conventionally and early loaded titanium and titanium-zirconium alloy dental implants.
Akça K., Eser A., Çavuşoğlu Y., Sağırkaya E., Çehreli M.
Medical & biological engineering & computing
, vol.53, pp.453-62, 2015 (SCI-Expanded, Scopus)
2014
201410. EFFECT OF DIGITIZING TECHNIQUES ON THE FIT OF IMPLANT-RETAINED CROWNS WITH DIFFERENT ANTI ROTATIONAL ABUTMENT FEATURES
AKTAŞ G., Ozcan N., Aydin D. H., Sahin E., AKÇA K.
JOURNAL OF PROSTHETIC DENTISTRY
, vol.111, no.5, pp.367-372, 2014 (SCI-Expanded, Scopus)
2014
201411. A pilot study of joint stability at the zirconium or titanium abutment/titanium implant interface.
Cavusoglu Y., Akça K., Gürbüz R., Cehreli M.
The International journal of oral & maxillofacial implants
, vol.29, pp.338-43, 2014 (SCI-Expanded, Scopus)
2013
201312. CAD/CAM glass ceramics for single-tooth implant crowns: a finite element analysis.
Akça K., Cavusoglu Y., Sagirkaya E., Aybar B., Cehreli M.
Implant dentistry
, vol.22, pp.623-6, 2013 (SCI-Expanded, Scopus)
2013
201313. The Effects of Pulsed Electromagnetic Field (PEMF) on Osteoblast-Like Cells Cultured on Titanium and Titanium-Zirconium Surfaces
Atalay B., Aybar B., Erguven M., Emes Y., Bultan O., AKÇA K., et al.
JOURNAL OF CRANIOFACIAL SURGERY
, vol.24, no.6, pp.2127-2134, 2013 (SCI-Expanded, Scopus)
2013
201314. Predicting bone remodeling around tissue- and bone-level dental implants used in reduced bone width.
Eser A., Tonuk E., Akca K., Dard M., Cehreli M.
Journal of biomechanics
, vol.46, pp.2250-7, 2013 (SCI-Expanded, Scopus)
2013
201315. Comparative Assessments, Meta-Analysis, and Recommended Guidelines for Reporting Studies on Histomorphometric Bone-Implant Contact in Humans
Sağirkaya E., Kucukekenci A., Karasoy D., Akça K., Eckert S., Çehreli M.
INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS
, vol.28, no.5, pp.1243-1263, 2013 (SCI-Expanded, Scopus)
2013
201316. Early-loaded one-stage implants retaining mandibular overdentures by two different mechanisms: 5-year results.
Akça K., Çavuşoğlu Y., Sağirkaya E., Çehreli M.
The International journal of oral & maxillofacial implants
, vol.28, pp.824-30, 2013 (SCI-Expanded, Scopus)
2013
201317. Low-level laser therapy vs. pulsed electromagnetic field on neonatal rat calvarial osteoblast-like cells
Emes Y., AKÇA K., Aybar B., Yalcin S., CAVUSOGLU Y., BAYSAL U., et al.
LASERS IN MEDICAL SCIENCE
, vol.28, no.3, pp.901-909, 2013 (SCI-Expanded, Scopus)
2013
201318. Immediate versus conventional loading of implant-supported maxillary overdentures: a finite element stress analysis.
Akca K., Eser A., Eckert S., Cavusoglu Y., Cehreli M.
The International journal of oral & maxillofacial implants
, vol.28, 2013 (SCI-Expanded, Scopus)
2013
201319. A prospective, open-ended, single-cohort clinical trial on early loaded Titanium-zirconia alloy implants in partially edentulous patients: up-to-24-month results.
Akca K., Cavusoglu Y., Uysal S., Cehreli M.
The International journal of oral & maxillofacial implants
, vol.28, pp.573-8, 2013 (SCI-Expanded, Scopus)
2012
201220. Efficacy of resonance frequency analysis in the diagnosis of compromised bone-implant interface.
Çavuşoğlu Y., Şahin E., Akça K.
Implant dentistry
, vol.21, pp.394-8, 2012 (SCI-Expanded, Scopus)
2011
201121. Fatigue resistance of 2 different CAD/CAM glass-ceramic materials used for single-tooth implant crowns.
Çavuşoğlu Y., Sahin E., Gürbüz R., Akça K.
Implant dentistry
, vol.20, pp.374-8, 2011 (SCI-Expanded, Scopus)
2011
201122. A Randomized Controlled Clinical Trial of Feldspathic Versus Glass-Infiltrated Alumina All-Ceramic Crowns: A 3-Year Follow-up
Cehreli M., Kokat A., Ozpay C., Karasoy D., Akca K.
INTERNATIONAL JOURNAL OF PROSTHODONTICS
, vol.24, no.1, pp.77-84, 2011 (SCI-Expanded, Scopus)
2010
201023. Spontaneous early exposure and marginal bone loss around conventionally and early-placed submerged implants: a double-blind study.
Cehreli M., Kökat A., Uysal S., Akca K.
Clinical oral implants research
, vol.21, pp.1327-33, 2010 (SCI-Expanded, Scopus)
2010
201024. İki Farklı Polivinil Silikon Ölçü Maddesinin Boyutsal Hassasiyetlerinin Karșılaștırılması
Meral Y. E., Akça K.
Clinical dentistry and research , vol.34, no.3, pp.21-28, 2010 (Peer-Reviewed Journal)
2010
201025. Micro ct analysis of sellar floor in pituitary adenomas, especially in Cushing's disease
BERKER M., Hazer D. B., Çehreli M., Salmon P., AKÇA K., Tekdemir I.
Acta Endocrinologica
, vol.6, no.4, pp.481-492, 2010 (SCI-Expanded, Scopus)
2010
201026. Marginal bone level changes and prosthetic maintenance of mandibular overdentures supported by 2 implants: a 5-year randomized clinical trial.
Cehreli M., Uysal S., Akca K.
Clinical implant dentistry and related research
, vol.12, pp.114-21, 2010 (SCI-Expanded, Scopus)
2010
201027. A Systematic Review of Marginal Bone Loss Around Implants Retaining or Supporting Overdentures
Cehreli M., Karasoy D., Kökat A., Akça K., Eckert S.
INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS
, vol.25, no.2, pp.266-277, 2010 (SCI-Expanded, Scopus)
2010
201028. Torque-fitting and resonance frequency analyses of implants in conventional sockets versus controlled bone defects in vitro.
Akça K., Kökat A., Cömert A., Akkocaoğlu M., Tekdemir I., Cehreli M.
International journal of oral and maxillofacial surgery
, vol.39, pp.169-73, 2010 (SCI-Expanded, Scopus)
2010
201029. Predicting time-dependent remodeling of bone around immediately loaded dental implants with different designs.
Eser A., Tonuk E., Akca K., Cehreli M.
Medical engineering & physics
, vol.32, pp.22-31, 2010 (SCI-Expanded, Scopus)
2010
201030. Marginal bone loss and prosthetic maintenance of bar-retained implant-supported overdentures: a prospective study.
Akca K., Cehreli M., Uysal S.
The International journal of oral & maxillofacial implants
, vol.25, pp.137-45, 2010 (SCI-Expanded, Scopus)
2010
201031. Systematic Review of Prosthetic Maintenance Requirements for Implant-Supported Overdentures
Cehreli M., Karasoy D., Kokat A., Akca K., Eckert S.
INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS
, vol.25, no.1, pp.163-180, 2010 (SCI-Expanded, Scopus)
2010
201032. Numerical simulation of the effect of time-to-loading on peri-implant bone.
Akça K., Eser A., Canay S.
Medical engineering & physics
, vol.32, pp.7-13, 2010 (SCI-Expanded, Scopus)
2010
201033. BIOMECHANICS OF ORAL IMPLANTS
Cehreli M., AKÇA K.
DENTAL IMPLANTATION AND TECHNOLOGY
, pp.125-162, 2010 (SCI-Expanded)
2009
200934. Restoratif Diş Hekimliğinde CAD/CAM Klinik Uygulamalar: Sirona Cerec Sistemi
Şahin E., Aktaş G., Özcan N., Hasanoğlu Aydın D., Akça K.
Clinical Dentistry and Research , vol.33, no.4, pp.34-40, 2009 (TRDizin)
2009
200935. Restoratif Dis Hekimlig inde CAD CAM Laboratuvar Uygulamaları Sirona inLab Sistemi
Sahin E., AKTAŞ G., ÖZCAN N., HASANOĞLU AYDIN D., AKÇA K.
Clinical Dentistry and Research , vol.33, pp.41-46, 2009 (TRDizin)
2009
200936. Meta-analysis of Methods Used to Assess Implant Stability
Cehreli M., Karasoy D., Akca K., Eckert S.
INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS
, vol.24, no.6, pp.1015-1032, 2009 (SCI-Expanded, Scopus)
2009
200937. Implant stability and bone density: assessment of correlation in fresh cadavers using conventional and osteotome implant sockets.
Cehreli M., Kökat A., Comert A., Akkocaoğlu M., Tekdemir I., Akça K.
Clinical oral implants research
, vol.20, pp.1163-9, 2009 (SCI-Expanded, Scopus)
2009
200938. Effects of prosthesis design and impression techniques on human cortical bone strain around oral implants under load.
Akça K., Kokat A., Sahin S., Iplikcioglu H., Cehreli M.
Medical engineering & physics
, vol.31, pp.758-63, 2009 (SCI-Expanded, Scopus)
2009
200939. Numeric simulation of time-dependent remodeling of bone around loaded oral implants.
Eser A., Tonuk E., Akca K., Cehreli M.
The International journal of oral & maxillofacial implants
, vol.24, pp.597-608, 2009 (SCI-Expanded, Scopus)
2009
200940. Biomechanical aspects of bone-level diameter shifting at implant-abutment interface.
Canay S., Akça K.
Implant dentistry
, vol.18, pp.239-48, 2009 (SCI-Expanded, Scopus)
2009
200941. Fresh-frozen vs. embalmed bone: is it possible to use formalin-fixed human bone for biomechanical experiments on implants?
Cömert A., Kökat A., Akkocaoğlu M., Tekdemir I., Akça K., Cehreli M.
Clinical oral implants research
, vol.20, pp.521-5, 2009 (SCI-Expanded, Scopus)
2009
200942. Nonlinear finite element analysis versus ex vivo strain gauge measurements on immediately loaded implants.
Eser A., Akça K., Eckert S., Cehreli M.
The International journal of oral & maxillofacial implants
, vol.24, pp.439-46, 2009 (SCI-Expanded, Scopus)
2009
200943. Human ex vivo bone tissue strains around immediately-loaded implants supporting mandibular fixed prostheses.
Kökat A., Cömert A., Tekdemir I., Akkocaoğlu M., Akça K., Cehreli M.
Implant dentistry
, vol.18, pp.162-71, 2009 (SCI-Expanded, Scopus)
2009
200944. CAD/CAM Zirconia vs. slip-cast glass-infiltrated Alumina/Zirconia all-ceramic crowns: 2-year results of a randomized controlled clinical trial.
Cehreli M., Kökat A., Akça K.
Journal of applied oral science : revista FOB
, vol.17, pp.49-55, 2009 (SCI-Expanded, Scopus)
2008
200845. Two-year prospective follow-up of implant/tooth-supported versus freestanding implant-supported fixed partial dentures.
Akça K., Cehreli M.
The International journal of periodontics & restorative dentistry
, vol.28, pp.593-9, 2008 (SCI-Expanded, Scopus)
2008
200846. Effect of compromised cortical bone on implant load distribution.
Akça K., Fanuscu M., Caputo A.
Journal of prosthodontics : official journal of the American College of Prosthodontists
, vol.17, pp.616-20, 2008 (SCI-Expanded, Scopus)
2008
200847. A photoelastic and strain-gauge analysis of interface force transmission of internal-cone implants.
Akça K., Cehreli M.
The International journal of periodontics & restorative dentistry
, vol.28, pp.391-9, 2008 (SCI-Expanded, Scopus)
2008
200848. PRIMARY STABILITY OF IMMEDIATE DENTAL IMPLANTS: CONVENTIONAL PLACEMENT VERSUS AN OSTEOTOME TECHNIQUE
Kokat A. M., Comert A., Tekdemir I., AKÇA K., Cehreli M. C.
INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS
, vol.31, no.7, pp.610, 2008 (SCI-Expanded, Scopus)
2007
200749. Effect of surgical techniques on primary implant stability and peri-implant bone.
Fanuscu M., Chang T., Akça K.
Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons
, vol.65, pp.2487-91, 2007 (SCI-Expanded, Scopus)
2007
200750. Platelet-rich plasma and bone healing: A histologic study in titanium bone chambers
Akca K., Demiralp B., Dagdeviren A.
INTERNATIONAL JOURNAL OF PERIODONTICS & RESTORATIVE DENTISTRY
, vol.27, no.4, pp.387-392, 2007 (SCI-Expanded, Scopus)
2007
200751. Micro-morphologic changes around biophysically-stimulated titanium implants in ovariectomized rats.
Akca K., Sarac E., Baysal U., Fanuscu M., Chang T., Cehreli M.
Head & face medicine
, vol.3, pp.28, 2007 (SCI-Expanded, Scopus)
2007
200752. Effects of attachment design on strains around implants supporting overdentures.
Cekiç C., Akça K., Cehreli M.
Quintessence international (Berlin, Germany : 1985)
, vol.38, 2007 (SCI-Expanded, Scopus)
2007
200753. Impact of similarity in chemical composition of light-polymerized resin composites on post-gel strains and interface integrity.
Cehreli M., Cehreli Z., Akca K.
Journal of materials science. Materials in medicine
, vol.18, pp.1053-60, 2007 (SCI-Expanded, Scopus)
2007
200754. Bone strains around apically free versus grafted implants in the posterior maxilla of human cadavers.
Cehreli M., Akkocaoglu M., Comert A., Tekdemir I., Akca K.
Medical & biological engineering & computing
, vol.45, pp.395-402, 2007 (SCI-Expanded, Scopus)
2007
200755. Primary stability of simultaneously placed dental implants in extraoral donor graft sites: a human cadaver study.
Akkocaoglu M., Cehreli M., Tekdemir I., Comert A., Güzel E., Dağdeviren A., et al.
Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons
, vol.65, pp.400-7, 2007 (SCI-Expanded, Scopus)
2007
200756. Bone strains around immediately loaded implants supporting mandibular overdentures in human cadavers.
Akça K., Akkocaoglu M., Cömert A., Tekdemir I., Cehreli M.
The International journal of oral & maxillofacial implants
, vol.22, pp.101-9, 2007 (SCI-Expanded, Scopus)
2006
200657. Numerical simulation of in vivo intraosseous torsional failure of a hollow-screw oral implant.
Cehreli M., Akkocaoglu M., Akca K.
Head & face medicine
, vol.2, pp.36, 2006 (SCI-Expanded, Scopus)
2006
200658. Neural response to sandblasted/acid-etched, TiO2-blasted, polished, and mechanochemically polished/nanostructured titanium implant surfaces
Onur M., Sezgin A., Gürpinar A., Sommer A., Akça K., Cehreli M.
CLINICAL ORAL IMPLANTS RESEARCH
, vol.17, no.5, pp.541-547, 2006 (SCI-Expanded, Scopus)
2006
200659. Impression techniques and misfit-induced strains on implant-supported superstructures: an in vitro study.
Cehreli M., Akça K.
The International journal of periodontics & restorative dentistry
, vol.26, pp.379-85, 2006 (SCI-Expanded, Scopus)
2006
200660. Biomechanical aspects of initial intraosseous stability and implant design: a quantitative micro-morphometric analysis.
Akça K., Chang T., Tekdemir I., Fanuscu M.
Clinical oral implants research
, vol.17, pp.465-72, 2006 (SCI-Expanded, Scopus)
2006
200661. Biomechanical consequences of progressive marginal bone loss around oral implants: a finite element stress analysis.
Akca K., Cehreli M.
Medical & biological engineering & computing
, vol.44, pp.527-35, 2006 (SCI-Expanded, Scopus)
2006
200662. Implant-tooth-supported fixed partial prostheses: correlations between in vivo occlusal bite forces and marginal bone reactions
AKCA K., Uysal S., CEHRELI M. C.
CLINICAL ORAL IMPLANTS RESEARCH
, vol.17, no.3, pp.331-336, 2006 (SCI-Expanded, Scopus)
2006
200663. Towards the limit of quantifying low-amplitude strains on bone and in coagulum around immediately loaded oral implants in extraction sockets.
Cehreli M., Comert A., Akkocaoglu M., Tekdemir I., Akca K.
Medical & biological engineering & computing
, vol.44, pp.86-94, 2006 (SCI-Expanded, Scopus)
2005
200564. Human ex vivo bone tissue strains around immediately loaded implants supporting maxillary overdentures.
Akça K., Akkocaoğlu M., Cömert A., Tekdemir I., Cehreli M.
Clinical oral implants research
, vol.16, pp.715-22, 2005 (SCI-Expanded, Scopus)
2005
200565. Human ex vivo bone tissue strains around natural teeth vs. immediate oral implants.
Cehreli M., Akkocaoglu M., Comert A., Tekdemir I., Akca K.
Clinical oral implants research
, vol.16, pp.540-8, 2005 (SCI-Expanded, Scopus)
2005
200566. Implant design and intraosseous stability of immediately placed implants: a human cadaver study.
Akkocaoglu M., Uysal S., Tekdemir I., Akca K., Cehreli M.
Clinical oral implants research
, vol.16, no.2, pp.202-9, 2005 (SCI-Expanded, Scopus)
2005
200567. Mechanobiology of bone and mechanocoupling of endosseous titanium oral implants.
Cehreli M., Akca K.
Journal of long-term effects of medical implants
, vol.15, pp.139-52, 2005 (Scopus)
2005
200568. Superadhesion: Attachment of nanobacteria to tissues - Model simulation
Sommer A., Cehreli M., Akca K., Sirin T., Piskin E.
CRYSTAL GROWTH & DESIGN
, vol.5, no.1, pp.21-23, 2005 (SCI-Expanded, Scopus)
2004
200469. Narrow-diameter implants as terminal support for occlusal three-unit FPDs: a biomechanical analysis.
Cehreli M., Akça K.
The International journal of periodontics & restorative dentistry
, vol.24, pp.513-9, 2004 (SCI-Expanded, Scopus)
2004
200470. Accuracy of a manual torque application device for morse-taper implants: a technical note.
Cehreli M., Akça K., Tönük E.
The International journal of oral & maxillofacial implants
, vol.19, pp.743-8, 2004 (SCI-Expanded, Scopus)
2004
200471. Dynamic fatigue resistance of implant-abutment junction in an internally notched morse-taper oral implant: influence of abutment design.
Cehreli M., Akça K., Iplikçioğlu H., Sahin S.
Clinical oral implants research
, vol.15, pp.459-65, 2004 (SCI-Expanded, Scopus)
2004
200472. Force transmission of one- and two-piece morse-taper oral implants: a nonlinear finite element analysis.
Cehreli M., Akça K., Iplikçioğlu H.
Clinical oral implants research
, vol.15, pp.481-9, 2004 (SCI-Expanded, Scopus)
2004
200473. Accuracy of 2 impression techniques for ITI implants.
Akça K., Cehreli M.
The International journal of oral & maxillofacial implants
, vol.19, pp.517-23, 2004 (SCI-Expanded, Scopus)
2004
200474. Fabrication of a screw-retained fixed provisional prosthesis supported by dental implants.
Kökat A., Akça K.
The Journal of prosthetic dentistry
, vol.91, pp.293-7, 2004 (SCI-Expanded, Scopus)
2004
200475. Role of mechanical environment and implant design on bone tissue differentiation: current knowledge and future contexts.
Cehreli M., Sahin S., Akça K.
Journal of dentistry
, vol.32, pp.123-32, 2004 (SCI-Expanded, Scopus)
2003
200376. Two-year follow-up of a patient with oligodontia treated with implant- and tooth-supported fixed partial dentures: a case report.
Giray B., Akça K., Iplikçioğlu H., Akça E.
The International journal of oral & maxillofacial implants
, vol.18, pp.905-11, 2003 (SCI-Expanded, Scopus)
2003
200377. Evaluation of the mechanical characteristics of the implant-abutment complex of a reduced-diameter morse-taper implant. A nonlinear finite element stress analysis.
Akça K., Cehreli M., Iplikçioğlu H.
Clinical oral implants research
, vol.14, pp.444-54, 2003 (SCI-Expanded, Scopus)
2003
200378. Comparison of non-linear finite element stress analysis with in vitro strain gauge measurements on a Morse taper implant.
Iplikçioğlu H., Akça K., Cehreli M., Sahin S.
The International journal of oral & maxillofacial implants
, vol.18, pp.258-65, 2003 (SCI-Expanded, Scopus)
2002
200279. Comparison of microleakage properties of three different filling materials. An autoradiographic study
Hersek N. E., Canay S., Akça K., Ciftçi Y.
JOURNAL OF ORAL REHABILITATION
, vol.29, no.12, pp.1212-1217, 2002 (SCI-Expanded, Scopus)
2002
200280. Comparison of uniaxial resistance forces of cements used with implant-supported crowns.
Akça K., Iplikçioğlu H., Cehreli M.
The International journal of oral & maxillofacial implants
, vol.17, pp.536-42, 2002 (SCI-Expanded, Scopus)
2002
200281. Tensile strength of type IV dental stones dried in a microwave oven
Hersek N. E., Canay S., Akça K., Ciftçi Y.
JOURNAL OF PROSTHETIC DENTISTRY
, vol.87, no.5, pp.499-502, 2002 (SCI-Expanded, Scopus)
2002
200282. Finite element stress analysis of the effect of short implant usage in place of cantilever extensions in mandibular posterior edentulism.
Akça K., Iplikçioğlu H.
Journal of oral rehabilitation
, vol.29, pp.350-6, 2002 (SCI-Expanded, Scopus)
2002
200283. A comparison of three-dimensional finite element stress analysis with in vitro strain gauge measurements on dental implants.
Akça K., Cehreli M., Iplikçioglu H.
The International journal of prosthodontics
, vol.15, pp.115-21, 2002 (SCI-Expanded, Scopus)
2002
200284. A surgical guide for accurate mesiodistal paralleling of implants in the posterior edentulous mandible.
Akça K., Iplikçioğlu H., Cehreli M.
The Journal of prosthetic dentistry
, vol.87, pp.233-5, 2002 (SCI-Expanded, Scopus)
2002
200285. One-year follow-up of an implant with early radiographic signs of loss of osseointegration: case report.
Akca K., Iplikcioglu H.
Clinical implant dentistry and related research
, vol.4, pp.43-6, 2002 (SCI-Expanded, Scopus)
2002
200286. Comparative evaluation of the effect of diameter, length and number of implants supporting three-unit fixed partial prostheses on stress distribution in the bone.
Iplikçioğlu H., Akça K.
Journal of dentistry
, vol.30, pp.41-6, 2002 (SCI-Expanded, Scopus)
2002
200287. The use of computerized tomography for diagnosis and treatment planning in implant dentistry.
Iplikçioğlu H., Akça K., Cehreli M.
The Journal of oral implantology
, vol.28, pp.29-36, 2002 (SCI-Expanded, Scopus)
2001
200188. Finite element stress analysis of the influence of staggered versus straight placement of dental implants.
Akça K., Iplikçioğlu H.
The International journal of oral & maxillofacial implants
, vol.16, pp.722-30, 2001 (SCI-Expanded, Scopus)
2001
200189. Tensile bond strength of ceramic orthodontic brackets bonded to porcelain surfaces.
Kocadereli I., Canay S., Akça K.
American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics
, vol.119, pp.617-20, 2001 (SCI-Expanded, Scopus)
2001
200190. Evaluation of the effect of the residual bone angulation on implant-supported fixed prostheses in mandibular posterior edentulism. Part I: Spiral computed tomography study.
Akça K., Iplikçioğlu H.
Implant dentistry
, vol.10, pp.216-22, 2001 (SCI-Expanded, Scopus)
2001
200191. Evaluation of the effect of the residual bone angulation on implant-supported fixed prosthesis in mandibular posterior edentulism. Part II: 3-D finite element stress analysis.
Akça K., Iplikçioğlu H.
Implant dentistry
, vol.10, pp.238-45, 2001 (SCI-Expanded, Scopus)
2000
200092. A multidisciplinary approach to single-tooth, implant-supported prostheses: a report of three cases.
Akça K., Iplikçioglu H., Akça E.
The Journal of oral implantology
, vol.26, pp.199-203, 2000 (SCI-Expanded, Scopus)
1999
199993. Comparison of diametral tensile strength of microwave and oven-dried investment materials
Canay S., Hersek N. E., Ciftçi Y., Akça K.
JOURNAL OF PROSTHETIC DENTISTRY
, vol.82, no.3, pp.286-290, 1999 (SCI-Expanded, Scopus)
1998
199894. Effect of microwave drying on the strength of gypsum materials
Hersek N., Canay S., Ciftci Y., Akca K.
JOURNAL OF DENTAL RESEARCH
, vol.77, pp.823, 1998 (SCI-Expanded, Scopus)
1996
199695. The effect of weight loss of liquid on the diametral tensile strengths of various kinds of luting cements.
Canay S., Hersek N., Akça K., Ciftçi Y.
International dental journal
, vol.46, pp.52-8, 1996 (SCI-Expanded, Scopus)
Papers Presented at Peer-Reviewed Scientific Conferences
2017
20171. Dudak damak yarıklı hastanın protetik rehabilitasyonu: Vaka raporu
DENİZ D., AKÇA K., AKTAŞ G.
23. ULUSLARARASI TÜRK PROSTODONTİ VE İMPLANTOLOJİ DERNEĞİ BİLİMSEL KONGRESİ, 9 - 12 November 2017, (Summary Text)
2010
20102. The influences of pulsed electromagnetic field and low level laser therapy on neonatal rat calvarial osteoblast-like cells.
Emes Y., Akça K., Aybar B., Çehreli M. C., Baysal U., İşsever H., et al.
European Association for Osseointegration 19th Annual Scientif Meeting , Glasgow, United Kingdom, 7 - 09 October 2010, pp.1180, (Summary Text)
2008
20083. Biomechanical comparison of fresh-frozen vsembalmed bone for implants
Cömert A., Tekdemir İ., Akça K., Çehreli M. C.
European Association for Osseointegration 17th Annual Scientif Meeting , Warszawa, Poland, 8 - 10 October 2008, pp.957, (Summary Text)
2007
20074. Numerical simulation of peri-implant early bone healing
Akça K., Canay R. Ş.
European Association for Osseointegration 16th Annual Scientif Meeting , Barcelona, Spain, 25 - 27 October 2007, pp.88, (Summary Text)
2006
20065. Micro-morphologic changes around biophysically stimulated implants in ovariectomized rats
Akça K., Baysal U., Çehreli M. C.
European Association for Osseointegration 15th Annual Scientif Meeting , Zürich, Switzerland, 5 - 07 October 2006, pp.199, (Summary Text)
2006
20066. Effect of compromised cortical bone condition on implant load distribution.
Akça K.
European Association for Osseointegration 15th Annual Scientif Meeting , Zürich, Switzerland, 5 - 07 October 2006, pp.199, (Summary Text)
2005
20057. Ex-vivo bone strains around apically-free vs –lifted implants in posterior maxilla
Akça K., Cömert A., Tekdemir İ., Çehreli M. C.
European Association for Osseointegration 15th Annual Scientif Meeting , Munich, Germany, 22 - 24 September 2005, pp.95, (Summary Text)
2004
20048. İnterdisipliner tedavi yaklaşımı İmplant destekli RPE ve Ortognatik Cerrahi
AKSU M., ENACAR A., MAVİLİ M. E., GİRAY B., AKÇA K., GÜNCÜ M. B.
9. Uluslarası Türk Ortodonti Derneği Kongresi, Antalya, Turkey, 3 - 06 October 2004, (Summary Text)
Books
2015
20151. Implant fractures: etiology, prevention, and treatment
Akça K.
in: Dental Implant Complications: Etiology, Prevention, and Treatment, Stuart J. Froum, Editor, John Wiley & Sons, West Sussex, UK , New-Jersey, pp.132-144, 2015
2012
20122. Implant Supported Fixed Partial Prosthesis: Current Concepts and Future Directions
Akça K.
in: Biomechanics of Dental Implants: Handbook for Researchers, murat cehreli, Editor, NOVA Science Publishers Inc. , New-York, pp.341-372, 2012
2009
20093. Biomechanics of Oral Implants
Akça K.
in: Dental Implantation and Technology, Paul A. Williams, Editor, NOVA Science Publishers Inc. , New-York, pp.125-162, 2009
Funded Projects
2022 - 2025
2022 - 2025Tam Dişsiz Üst Çenede Farklı Ölçü Yöntemlerinin In Vivo Olarak Karşılaştırılması
Project Supported by Higher Education Institutions , BAP Other
AKÇA K. (Executive), KARACA S.
2020 - 2023
2020 - 2023İmplant destekli sabit protez yapımında direkt dijital ölçü için kullanılan farklı tarama postlarının hassasiyetinin değerlendirilmesi: Metodolojik çalışma
Project Supported by Higher Education Institutions , BAP Other
AKÇA K. (Executive), DEMİR F.
2016 - 2018
2016 - 2018Bilgisayar destekli tasarım ve üretim (CAD/CAM) ile üç farklı materyalden üretilen tek kronların klinik performansı: Bir yıllık başlangıç sonuçlarının değerlendirilmesi
Project Supported by Higher Education Institutions , BAP Other
AKTAŞ G. (Executive), GÜNCÜ G. N., AKÇA K., GÜNCÜ M. B., DENİZ D.
2016 - 2017
2016 - 2017İMPLANT DESTEKLİ TAM ARK TEK PARÇA ÜST YAPI ÜRETİMİNDE AĞIZİÇİ DİJİTAL ÖLÇÜ YÖNTEMİNİN DEĞERLENDİRİLMESİ
Project Supported by Higher Education Institutions , BAP Other
AKÇA K. (Executive), Varol M.
2012 - 2017
2012 - 2017Cam Seramik Endokronların Biyomekaniksel Özelliklerinin preklinik ve klinik olarak değerlendirilmesi
Project Supported by Higher Education Institutions , BAP PhD
AKÇA K. (Executive)
2012 - 2013
2012 - 2013Implant-dayanak arayüzeyinde titanyum ve zirkonyum arasındaki mekaniksel ilişki
TUBITAK Project , 1002 - Quick Support Program
Akça K. (Executive)
2003 - 2010
2003 - 2010Farklı Yükleme Koşullarının Oral Implantları Çevreleyen Kemiğe Etkisinin Histolojik ve Histomorfometrik Olarak İncelenmesi
Project Supported by Higher Education Institutions , BAP Research Project
Akça K. (Executive), Çehreli M. C., Usubütün A.
2008 - 2009
2008 - 2009İmplant-Dayanak Birleşim Aralığının Yatay Yönde Farklı Konumlandırılmasının Biyomekaniksel Etkileri
Project Supported by Higher Education Institutions , BAP Research Project
Akça K. (Executive)
2007 - 2009
2007 - 2009CEREC 3 direkt (ağıziçi) görüntüleme ile Sirona In EOS (model) görüntüleme kullanılarak CAD/CAM teknolojisiyle yapılan tam seramik sabit protetik restorasyonların kenar uyumlarının karşılaştırılması
Project Supported by Higher Education Institutions , BAP Infrastructure
Akça K., Şahin E.(Executive)
2003 - 2006
2003 - 2006FONKSİYONEL KUVVETLERİN İMPLANT DESTEKLİ PROTEZLERDE OLUŞTURDUĞU DEFORMASYONUN IN-VIVO STRAIN-GAUGE ANALİZ YÖNTEMİ İLE İNCELENMESİ
CB Strateji ve Bütçe Başkanlığı (Kalkınma Bakanlığı) Projesi
Şahin S.(Executive), Çehreli M. C., Iplikçioğlu H., Akça K.
2004 - 2005
2004 - 2005Darbeli manyetik alanların oral implantları destekleyen kemikteki biyolojik reaksiyonları incelemek için kontrollü elektromanyetik alan meydana getiren bobin sistemi geliştirilmesi
TUBITAK Project , 1000 - Üniversitelerin Araştırma ve Geliştirme Potansiyelinin Arttırılmasına Yönelik Destek Programı
Akça K., Baysal U. (Executive)
Activities in Scientific Journals
2012 - Present
2012 - PresentMedical Engineering & Physics
Committee Member
2006 - Present
2006 - PresentJournal Of Dentistry
Committee Member
Memberships and Roles in Scientific Organizations
2005 - Present
2005 - PresentITI (International Team for Implantology)
Associate Member
2015 - 2016
2015 - 2016ITI Turkey&Azerbaijan Section Leadership
Chairman
2011 - 2016
2011 - 2016ITI Study Club Committee
Member
2010 - 2015
2010 - 2015ITI Turkey&Azerbaijan Section Leadership Member (Study Club Coordinator)
Member
Awards
April 2010
April 2010Ralph V. McKinney, Jr. Annual Award (outstanding article) in Basic and Clinical Research
International Congress Of Oral Implantologists (Icoı).
November 2007
November 2007Darbeli elektromanyetik uyarımlı implant
Hacettepe Üniversitesi Teknokent A.Ş. Ve Interfarma A.Ş.
Scholarships
2005 - 2005
2005 - 2005