Mechanical properties and water sorption of two experimental glass ionomer cements with hydroxyapatite or calcium fluorapatite formulation
DENTAL MATERIALS JOURNAL, cilt.38, sa.3, ss.471-479, 2019 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 38 Sayı: 3
- Basım Tarihi: 2019
- Doi Numarası: 10.4012/dmj.2018-085
- Dergi Adı: DENTAL MATERIALS JOURNAL
- Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
- Sayfa Sayıları: ss.471-479
- Anahtar Kelimeler: Glass ionomer cement, Hydroxyapatite, Fluorapatite, Calcium fluorapatite, Mechanical properties, IN-VITRO MICROHARDNESS, SURFACE HARDNESS, STRENGTH, HEAT, BEHAVIOR, STORAGE, DENTIN
- Açık Arşiv Koleksiyonu: AVESİS Açık Erişim Koleksiyonu
- Hacettepe Üniversitesi Adresli: Evet
Özet
In this study the mechanical behavior and water sorption (Ws) of experimental glass-ionomer-cements (GICs) with hydroxyapatite (HA) or calcium fluorapatite (CFA) prototype formulations were examined. Specimens from two experimental and one commercially available GIC were prepared in three protocols; (1) according to the manufacturer's instructions, (2) with coating and (3) with heat application. The specimens were stored in distilled water or artificial saliva at 37 degrees C for 7- and 30-days. Flexural strength (FS), Vickers hardness (VHN) and Ws of GICs were evaluated. Experimental GICs showed higher FS values than commercial GIC (p<0.001). Higher FS and VHN values were observed when GICs were prepared according to manufacturer's recommendation. FS was affected only by GIC-type (eta(2)=0.027), whereas VHN was affected by GIC-type (eta(2)=0.331), treatment-protocols (eta(2)=0.067), storage-medium (eta(2)=0.100) and increased storage-duration (eta(2)=0.317). The tested parameters did not significantly influence the Ws of all tested GICs (p>0.05). The GICs with HA or CFA formulations might represent a promising approach due to their FS, VHN and Ws characteristics.