Regression-based multiobjective optimization approaches for the autoclave composite parts placement problem: a mixed integer nonlinear programming model and an evolutionary algorithm

Kırdar G., TEZCANER ÖZTÜRK D., TESTİK M. C.

Soft Computing, cilt.27, sa.19, ss.14045-14062, 2023 (SCI-Expanded) identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 27 Sayı: 19
  • Basım Tarihi: 2023
  • Doi Numarası: 10.1007/s00500-023-08847-w
  • Dergi Adı: Soft Computing
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, Applied Science & Technology Source, Compendex, Computer & Applied Sciences, INSPEC, zbMATH
  • Sayfa Sayıları: ss.14045-14062
  • Anahtar Kelimeler: Composite parts production, Evolutionary algorithms, Multiobjective optimization, Multiple linear regression, Parts placement in autoclave
  • Hacettepe Üniversitesi Adresli: Evet

Özet

The autoclave curing process is an important step in composite parts production, in which a batch of parts is cured in an autoclave simultaneously by systematically changing the inner temperature and pressure. Typically, curing cycles have three main phases: heating, dwell, and cooling. During the heating phase, parts are heated until they reach a curing temperature. Due to factors such as positions of parts inside the autoclave and batch composition, it is often not possible for the parts to reach the curing temperature simultaneously. Parts that reach the curing temperature earlier than the others are overcured, which negatively affects their quality. Moreover, shorter curing cycles are preferred due to the savings in cost, energy, and time. This study addresses these two considerations with a unified approach that integrates two decision support methods: regression and optimization. In the first stage, we determine the factors affecting the time to reach the curing temperature and relate them using multiple linear regression models. In the second stage, we utilize the regression models of the first stage and determine efficient placements of the parts in the autoclave considering two objectives: minimization of the duration of the heating phase and the maximum time delay between parts in reaching the curing temperature. The former corresponds to increasing productivity and the latter corresponds to minimizing quality losses. We propose a biobjective mixed integer nonlinear programming model together with its equivalent linear model to generate the efficient frontier. Additionally, to obtain solutions faster, a multiobjective evolutionary algorithm and its mechanisms that address the problem are proposed. The approach is applied on real cases in a composite factory. The estimates of the regression models are significantly close to the realizations, and considerable gains in both objectives are observed with the optimization tools.