Research Information System
Ozone: Science and Engineering, 2026 (SCI-Expanded, Scopus)
Nanoplastic pollution has emerged as a critical environmental concern, posing a challenge for conventional treatment. This study addresses treatment of nanoplastics using well-arranged TiO2 nanotube photocatalytic ozonation system. Experiments were conducted on polymer types of polypropylene (PP), polyethylene (PE), and polyvinylchloride (PVC) at concentrations ranging from 1.3 to 200 ppm, while systematically varying ozone concentration (0, 10, 20 mg/L), pH (3, 5, 10), and nanotube diameter (32.3, 53.9, 67.6 nm). Results demonstrate that degradation efficiency increased with larger nanotube diameters (from 33% to 87%) and acidic pH (up to ~90%), while ozone concentrations above 10 mg/L had negligible impact (from 30% to 76%, from 19% to 62%, from 39% to 87% for PP, PE, PVC respectively), with maximum efficiency observed for PVC. Post-treatment examination of TiO2 nanotubes revealed that surface morphology remained intact after the total duration of treatment that cover all experimental trials. These observations indicate high structural durability and support reusability of catalyst under respective operational conditions. Novelty of this work resides in use of immobilized TiO2 nanotube arrays for photocatalytic ozonation of nanoplastics and in systematic evaluation of operational and morphological parameters affecting process performance. Future studies are needed for evaluation of method in pilot applications in order to evaluate potential scale-up issues.