A Flexible Piezoelectric Energy Harvesting System for Broadband and Low-frequency Vibrations


CETIN H. G. , SÜMER B.

Conference on EUROSENSORS, Freiburg, Almanya, 6 - 09 Eylül 2015, cilt.120, ss.345-348 identifier identifier

  • Cilt numarası: 120
  • Doi Numarası: 10.1016/j.proeng.2015.08.631
  • Basıldığı Şehir: Freiburg
  • Basıldığı Ülke: Almanya
  • Sayfa Sayıları: ss.345-348

Özet

A piezoelectric energy harvesting system, where elastomer pillars stand on a piezoelectric polymer layer is designed, fabricated and tested for low and broadband frequency vibrations. In this configuration, elastomer pillars behave like a set of oscillators on the vibrating structure, which provide absorption of vibration energy and act as an energy sink. Then, the stored elastic energy is converted to electrical energy in the clamped boundary via stress concentration on the piezoelectric layer. A single pillar system with 10 mm diameter and aspect ratio of 3 with an active area of 39 mm(2) and thickness of 28 mu m generate a voltage of 4.5 V and an output power of 58.4 mu W for an input acceleration of 3 g at 62 Hz with optimized load resistance condition. (C) 2015 The Authors. Published by Elsevier Ltd.