Hydraulic Performance of an Angled Oppermann Fine Screen with Guidance Wall


Ozbey C., KÜÇÜKALİ S., Hassinger R.

WATER, vol.17, no.16, 2025 (SCI-Expanded, Scopus) identifier

  • Publication Type: Article / Article
  • Volume: 17 Issue: 16
  • Publication Date: 2025
  • Doi Number: 10.3390/w17162398
  • Journal Name: WATER
  • Journal Indexes: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Compendex, Environment Index, Geobase, INSPEC
  • Hacettepe University Affiliated: Yes

Abstract

Fish protection and guidance are critical factors in the design and operation of water intakes at hydropower plants. In this study, the hydraulic performance of the angled Oppermann fine screen has been investigated in a hybrid model with and without a guidance wall. The experiments were conducted under two different angles of 30 degrees and 45 degrees, and a bar spacing of 10 mm at a large-scale flume with a width of 2 m. Just up- and downstream of the screen, three-dimensional velocities were measured with Acoustic Doppler Velocimetry (ADV). In the computational fluid dynamics (CFD) model, the Large Eddy Simulation (LES) coupled with the Darcy-Forchheimer law, in which screens were modeled as homogeneous porous media, was employed. The experimental results revealed that velocities less than 0.5 m/s just upstream of the Oppermann fine screen and tangential velocity gradients over the entire cross-section of the screen were found to be 0.04-0.338 m/s/m and 0.04-0.856 m/s/m for alpha = 30 degrees and alpha = 45 degrees, respectively, creating favorable hydraulic conditions for effective downstream fish guidance. The CFD model was validated against the experimental data within an acceptable error range, both for the velocity and the turbulent kinetic energy. Numerical simulations showed that implementing a curved guidance wall creates a symmetrical and homogeneous downstream flow field without the formation of recirculation zones behind the angled screen.