Seismic behavior and improvement of autoclaved aerated concrete infill walls

BİNİCİ B., CANBAY E., ALDEMİR A., Demirel I. O., Uzgan U., Eryurtlu Z., ...Daha Fazla

ENGINEERING STRUCTURES, cilt.193, ss.68-81, 2019 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 193
  • Basım Tarihi: 2019
  • Doi Numarası: 10.1016/j.engstruct.2019.05.032
  • Dergi Adı: ENGINEERING STRUCTURES
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.68-81
  • Anahtar Kelimeler: Infill wall, Autoclaved aerated concrete, Seismic performance, Out-of-plane, In-plane response, Cyclic test, Experimental behaviour, AAC MASONRY, SLIDING JOINTS, FRAMES, PERFORMANCE, CAPACITY
  • Hacettepe Üniversitesi Adresli: Evet

Özet

Performance of infill walls in reinforced concrete (RC) frames is generally questionable under the combined action of in-plane and out-of-plane seismic demands. Despite the vast number of tests investigating the behavior of brick masonry infill walls in RC frames, past research is limited for infill walls made of Autoclaved Aerated Concrete (AAC) blocks. In the first part of the study, six single-bay single-story half-scaled RC frames were tested under the action of in-plane cyclic displacement excursions and/or out-of-plane pressure. It was found that the presence of out-of-plane pressure can significantly reduce the deformation capacity of RC framed AAC infill walls. Afterwards, a new innovative system is proposed to protect the infill walls from in-plane induced forces while providing out-of-plane support. Sliding connectors placed inside the AAC blocks were used to isolate the infill wall from earthquake-induced frame deformations, while providing out-of-plane support. In order to test the beneficial effect of the proposed system, three additional tests were conducted. The proposed system managed to reach in-plane deformation demand of 2% without cracking and preserving its out-of-plane stability.