Atıf İçin Kopyala
Tanabi H.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, cilt.35, sa.11, ss.2177-2193, 2022 (SCI-Expanded)
-
Yayın Türü:
Makale / Tam Makale
-
Cilt numarası:
35
Sayı:
11
-
Basım Tarihi:
2022
-
Doi Numarası:
10.1177/08927057211063399
-
Dergi Adı:
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
-
Derginin Tarandığı İndeksler:
Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, Aerospace Database, Communication Abstracts, Compendex, INSPEC, Metadex, Civil Engineering Abstracts
-
Sayfa Sayıları:
ss.2177-2193
-
Hacettepe Üniversitesi Adresli:
Hayır
Özet
Short fiber-reinforced 3D printed components are high performance materials with a wide range of potential applications in various industries ranging from aerospace to automotive.
Mechanical characterization of 3D printed short carbon fiber polyethylene terephthalate and acrylonitrile butadiene styrene parts are presented under the application of shear load in this study. The anisotropy properties of both composite and polymer materials were investigated by printing samples at two different orientations, using fused deposition modeling (FDM) technique. The fabricated samples were subjected to tensile and shearing loads while 2D digital image correlation (DIC) was used to measure full-field strain on the specimen.
The obtained results revealed a noticeable anisotropy in shear properties as the function of printing orientation. Moreover, it found that using carbon fiber-reinforced PET results in higher elastic modulus, tensile, and shear strengths up to 180%, 230%, and 40% compared to ABS.