Predicting the physico-mechanical properties of rocks from electrical impedance spectoscopy measurements


KAHRAMAN S., Alber A.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, cilt.43, sa.4, ss.543-553, 2006 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 43 Sayı: 4
  • Basım Tarihi: 2006
  • Doi Numarası: 10.1016/j.ijrmms.2005.09.013
  • Dergi Adı: INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.543-553
  • Anahtar Kelimeler: electrical resistivity, impedance spectroscopy, rock properties, regression analysis, UNIAXIAL COMPRESSIVE STRENGTH, POINT-LOAD STRENGTH, INDUCED POLARIZATION, MARINE-SEDIMENTS, POROUS ROCKS, RESISTIVITY, POROSITY, CONDUCTIVITY, SPECTROSCOPY, DEPENDENCE
  • Hacettepe Üniversitesi Adresli: Hayır

Özet

Electrical resistivity values of eight different samples cored from a fault breccia were measured using all impedance analyser. The uniaxial compressive strength, elastic modulus, point load strength, Schmidt hammer Value, P-wave velocity, density and porosity values of the samples were determined in the laboratory. Electrical resistivity values were correlated with the corresponding physico-mechanical properties using the method of least-squares regression and the derived equations were checked by the t and F-test. A strong logarithmic relation between uniaxial compressive strength and resistivity was found. The relation between elastic modulus and resistivity is significant and follows a logarithmic function. Density was linearly, and porosity was exponentially correlated with resistivity.